We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Firstly, many thanks for this wornderfull library !
I'd like to indicate a strange behaviour I noticed 👍
LCD_DC = Pin(8, Pin.OUT) LCD_CS = Pin(9, Pin.OUT) LCD_CLK = Pin(10, Pin.OUT) LCD_DIN = Pin(11, Pin.OUT) LCD_RST = Pin(12, Pin.OUT) LCD_BL = Pin(13, Pin.OUT) TFT_WIDTH = 240 TFT_HEIGHT = 320
Working correctly :
display = st7789.ST7789(spi, width=TFT_WIDTH, height=TFT_HEIGHT, reset=LCD_RST, cs=LCD_CS, dc=Pin(8, Pin.OUT), backlight=LCD_BL, rotation=1, buffer_size=0, options=0)
Not Working (Black screen)
display = st7789.ST7789(spi, width=TFT_WIDTH, height=TFT_HEIGHT, reset=LCD_RST, cs=LCD_CS, dc=LCD_DC, backlight=LCD_BL, rotation=1, buffer_size=0, options=0)
Thus, there's a way for making it work as expected but it is strange that this bug applies only to the dc pin !
The text was updated successfully, but these errors were encountered:
I'll look into this.
Sorry, something went wrong.
No branches or pull requests
Firstly, many thanks for this wornderfull library !
I'd like to indicate a strange behaviour I noticed 👍
LCD_DC = Pin(8, Pin.OUT)
LCD_CS = Pin(9, Pin.OUT)
LCD_CLK = Pin(10, Pin.OUT)
LCD_DIN = Pin(11, Pin.OUT)
LCD_RST = Pin(12, Pin.OUT)
LCD_BL = Pin(13, Pin.OUT)
TFT_WIDTH = 240
TFT_HEIGHT = 320
Working correctly :
display = st7789.ST7789(spi, width=TFT_WIDTH, height=TFT_HEIGHT, reset=LCD_RST,
cs=LCD_CS, dc=Pin(8, Pin.OUT), backlight=LCD_BL, rotation=1, buffer_size=0, options=0)
Not Working (Black screen)
display = st7789.ST7789(spi, width=TFT_WIDTH, height=TFT_HEIGHT, reset=LCD_RST,
cs=LCD_CS, dc=LCD_DC, backlight=LCD_BL, rotation=1, buffer_size=0, options=0)
Thus, there's a way for making it work as expected but it is strange that this bug applies only to the dc pin !
The text was updated successfully, but these errors were encountered: