-
Notifications
You must be signed in to change notification settings - Fork 96
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
YI 2k Pro Home (y623) with 0.3.1 not working well #846
Comments
Hi, mine works fine. I only have the problem that at night when there is no motion in the image I cannot access the RTSP stream. I think this is due to the fact that the camera is not sending full frames then. |
AFAIK there are no known issues.
Could you please send me a copy of the file /dev/shm/fshare_frame_buf during the night? |
When playing an "interesting" stream the "mplayer -v" output is the following:
as soon as I point the camera to the wall I only get:
Also the stream takes very long to show a usable image. You can see the seconds in the top left changing but it takes very long to show the full image. I assume this is the point an iFrame/FullFrame (I am not sure about the right name of this) is sent. Screencast_20240407_133359.mp4Some players (e.g. browser) cannot start such a stream at all, mplayer is "patient" enough to wait. In the night this behaviour is even worse, sometimes it really takes a movement for the stream to starte / recover. |
Here a video in the dark, waiting does not help to restore the stream, Only movement shows it properly: Screencast_20240407_134551.mp4 |
fshare_frame_buf while mplayer is showing a grey image in the stream |
I'm checking the buffer (high res) and it seems ok. Please send me a full log of the process rRTSPServer. |
Here it is. The screen was grey the full time, at the end I waved my hand and the image was restored. |
Wow... a lot of buffer errors:
The frame is greater than 256 KB. |
@roleoroleo thx for the fix. But how to check if the update is done, if version stays the same? Espeially if you have several cams? I tried to copy the files from the .gz to root, as the update button does not recogonize new version in tmp/sd folder, as version is same. Did now a clean install to sd and restored config. Might this fix also be relevant for Dome Camera U, as it also has 2k? |
I will change the version number when I will release the new version. |
thx, but as stated manual procees via update button does not work, as same version is shown. Did now a clean install to sd and restored config. Might this fix also be relevant for Dome Camera U, as it also has 2k? |
Thanks, I will test this and give feedback! |
First tests look promising, will do more testing tomorrow |
Tested and approved on my end, i was previously on 0.3.0 |
I also can confirm that it works far better now! It still takes some seconds for the first image but in general it works! (I think the short waiting time for the first iFrame is intended to keep the bitrate small) |
Please, test 0.3.2. |
Installed it yesterday, so far it looks good. Will report if there are any problems. |
I am not sure if this is caused by the latest changes, but RTSP players based on VLC (like "Ojo") have a hard time streaming the video. MPV/mplayer works much better. |
It's always been this way and I've never understood why. |
Ah, ok. That's strange. Perhaps I will investigate if I find some spare time. |
No more issue on my side with 0.3.2 !
|
What is the load on your cam?
|
Be aware that i've deactivated everything instead of rtsp, ssh and IR led |
ok. In general my camera works, I only have issues with using the motion detection, see #867 But then I assume you are not using the motion detection at all. Nevertheless I wonder why the load is this high. As soon as I enable "Disble Cloud" my load jumps up. |
No issues on my end with Cloud Disabled |
This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions. |
Hi all,
I just got 2 YI 2k Pro Home (y623) and fwy623_0.3.1 not working well.
GUI is not reachable and stream is also also not stable, although wifi is good.
I already have YI 1080P Home| (y291ga) working fine with 0.3.1.
So is there a known issue with fwy623_0.3.1 on Pro Home?
thx
The text was updated successfully, but these errors were encountered: