Yi 1080p Home QFUS firmwareversion 12.0.35.8

[icho40]

My camera is supported according to the list.
I have downloaded the files for y291ga accordingly, unpacked them and copied them to the SD card.
Now the blue LED on the camera flashes continuously.
After waiting 15 minutes, I restarted the camera.
Same result.
What can I do?

[roleoroleo]

Extract the sd card and check if the cam starts normally without it.
Insert the sd card in your pc and check if a folder Factory.done exists.

[icho40]

Ok, now i have again these folders and files on the sd card:
backup
Factory.done
lower_half_init.sh
record
swapfile
yi-hack

Still now Wifi.
What now?

[roleoroleo]

Factory.done means that the hack is ok.
About wifi...

• are you sure the cam is not connected?
• did you check your router to see if the cam obtained an ip address?
• does the cam speak asking for a connection?
• does the yi app work?

[icho40]

are you sure the cam is not connected?

yes

did you check your router to see if the cam obtained an ip address?

yes, I even scanned my local network with nmap and couldn't find the cam

does the cam speak asking for a connection?

The cam says:"Waitung to connect" and the yellow light is blinking.

does the yi app work?

yes, my other Yi-home cam works fine.

[icho40]

I managed to add the cam to the app.
Seems like it's working korrektly.
Thanks for your patience and your help.

Greetings from Ulm/germany
Willi

[roleoroleo]

Glad to hear you solved the problem.
Thank you for your donation.