diff --git a/src/libslic3r/GCode/WipeTower2.cpp b/src/libslic3r/GCode/WipeTower2.cpp
index 8fc76935900..3c717a063de 100644
--- a/src/libslic3r/GCode/WipeTower2.cpp
+++ b/src/libslic3r/GCode/WipeTower2.cpp
@@ -1092,7 +1092,8 @@ void WipeTower2::toolchange_Wipe(
 	float dy = (is_first_layer() ? 1.f : m_extra_spacing) * m_perimeter_width; // Don't use the extra spacing for the first layer.
     // All the calculations in all other places take the spacing into account for all the layers.
 
-    const float target_speed = is_first_layer() ? m_first_layer_speed * 60.f : std::min(5400.f, m_infill_speed * 60.f);
+	// If spare layers are excluded->if 1 or less toolchange has been done, it must be sill the first layer, too.So slow down.
+    const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers) ? m_first_layer_speed * 60.f : std::min(5400.f, m_infill_speed * 60.f);
     float wipe_speed = 0.33f * target_speed;
 
     // if there is less than 2.5*m_perimeter_width to the edge, advance straightaway (there is likely a blob anyway)
@@ -1160,7 +1161,8 @@ WipeTower::ToolChangeResult WipeTower2::finish_layer()
 
 
 	// Slow down on the 1st layer.
-    bool first_layer = is_first_layer();
+    // If spare layers are excluded -> if 1 or less toolchange has been done, it must be still the first layer, too. So slow down.
+    bool first_layer = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers);
     float                      feedrate      = first_layer ? m_first_layer_speed * 60.f : std::min(5400.f, m_infill_speed * 60.f);
     float current_depth = m_layer_info->depth - m_layer_info->toolchanges_depth();
     WipeTower::box_coordinates fill_box(Vec2f(m_perimeter_width, m_layer_info->depth-(current_depth-m_perimeter_width)),