Skip to content

Latest commit

 

History

History
475 lines (354 loc) · 11.8 KB

ansible-deployment-scale.md

File metadata and controls

475 lines (354 loc) · 11.8 KB
Raw
title summary category
Scale the TiDB Cluster Using TiDB-Ansible
Use TiDB-Ansible to increase/decrease the capacity of a TiDB/TiKV/PD node.
operations

Scale the TiDB Cluster Using TiDB-Ansible

The capacity of a TiDB cluster can be increased or decreased without affecting the online services.

Warning: In decreasing the capacity, if your cluster has a mixed deployment of other services, do not perform the following procedures. The following examples assume that the removed nodes have no mixed deployment of other services.

Assume that the topology is as follows:

Name Host IP Services
node1 172.16.10.1 PD1
node2 172.16.10.2 PD2
node3 172.16.10.3 PD3, Monitor
node4 172.16.10.4 TiDB1
node5 172.16.10.5 TiDB2
node6 172.16.10.6 TiKV1
node7 172.16.10.7 TiKV2
node8 172.16.10.8 TiKV3
node9 172.16.10.9 TiKV4

Increase the capacity of a TiDB/TiKV node

For example, if you want to add two TiDB nodes (node101, node102) with the IP addresses 172.16.10.101 and 172.16.10.102, take the following steps:

  1. Edit the inventory.ini file and append the node information:

    [tidb_servers]
172.16.10.4
172.16.10.5
172.16.10.101
172.16.10.102

[pd_servers]
172.16.10.1
172.16.10.2
172.16.10.3

[tikv_servers]
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitored_servers]
172.16.10.1
172.16.10.2
172.16.10.3
172.16.10.4
172.16.10.5
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9
172.16.10.101
172.16.10.102

[monitoring_servers]
172.16.10.3

[grafana_servers]
172.16.10.3

    Now the topology is as follows:

    Name Host IP Services
    node1 172.16.10.1 PD1
    node2 172.16.10.2 PD2
    node3 172.16.10.3 PD3, Monitor
    node4 172.16.10.4 TiDB1
    node5 172.16.10.5 TiDB2
    node101 172.16.10.101 TiDB3
    node102 172.16.10.102 TiDB4
    node6 172.16.10.6 TiKV1
    node7 172.16.10.7 TiKV2
    node8 172.16.10.8 TiKV3
    node9 172.16.10.9 TiKV4

  2. Initialize the newly added node:

    ansible-playbook bootstrap.yml -l 172.16.10.101,172.16.10.102

    Note: If an alias is configured in the inventory.ini file, for example, node101 ansible_host=172.16.10.101, use -l to specify the alias when executing ansible-playbook. For example, ansible-playbook bootstrap.yml -l node101,node102. This also applies to the following steps.

  3. Deploy the newly added node:

    ansible-playbook deploy.yml -l 172.16.10.101,172.16.10.102

  4. Start the newly added node:

    ansible-playbook start.yml -l 172.16.10.101,172.16.10.102

  5. Update the Prometheus configuration and restart the cluster:

    ansible-playbook rolling_update_monitor.yml --tags=prometheus

  6. Monitor the status of the entire cluster and the newly added node by opening a browser to access the monitoring platform: http://172.16.10.3:3000.

You can use the same procedure to add a TiKV node. But to add a PD node, some configuration files need to be manually updated.

Increase the capacity of a PD node

For example, if you want to add a PD node (node103) with the IP address 172.16.10.103, take the following steps:

  1. Edit the inventory.ini file and append the node information to the end of the [pd_servers] group:

    [tidb_servers]
172.16.10.4
172.16.10.5

[pd_servers]
172.16.10.1
172.16.10.2
172.16.10.3
172.16.10.103

[tikv_servers]
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitored_servers]
172.16.10.4
172.16.10.5
172.16.10.1
172.16.10.2
172.16.10.3
172.16.10.103
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitoring_servers]
172.16.10.3

[grafana_servers]
172.16.10.3

    Now the topology is as follows:

    Name Host IP Services
    node1 172.16.10.1 PD1
    node2 172.16.10.2 PD2
    node3 172.16.10.3 PD3, Monitor
    node103 172.16.10.103 PD4
    node4 172.16.10.4 TiDB1
    node5 172.16.10.5 TiDB2
    node6 172.16.10.6 TiKV1
    node7 172.16.10.7 TiKV2
    node8 172.16.10.8 TiKV3
    node9 172.16.10.9 TiKV4

  2. Initialize the newly added node:

    ansible-playbook bootstrap.yml -l 172.16.10.103

  3. Deploy the newly added node:

    ansible-playbook deploy.yml -l 172.16.10.103

  4. Login the newly added PD node and edit the starting script:

    {deploy_dir}/scripts/run_pd.sh

    1. Remove the --initial-cluster="xxxx" \ configuration.

      Note: You cannot add the # character at the beginning of the line. Otherwise, the following configuration cannot take effect.

    2. Add --join="http://172.16.10.1:2379" \. The IP address (172.16.10.1) can be any of the existing PD IP address in the cluster.

    3. Manually start the PD service in the newly added PD node:

      {deploy_dir}/scripts/start_pd.sh

    4. Use pd-ctl to check whether the new node is added successfully:

      ./pd-ctl -u "http://172.16.10.1:2379"

      Note: pd-ctl is a command used to check the number of PD nodes.

  5. Apply a rolling update to the entire cluster:

    ansible-playbook rolling_update.yml

  6. Update the Prometheus configuration and restart the cluster:

    ansible-playbook rolling_update_monitor.yml --tags=prometheus

  7. Monitor the status of the entire cluster and the newly added node by opening a browser to access the monitoring platform: http://172.16.10.3:3000.

Decrease the capacity of a TiDB node

For example, if you want to remove a TiDB node (node5) with the IP address 172.16.10.5, take the following steps:

  1. Stop all services on node5:

    ansible-playbook stop.yml -l 172.16.10.5

  2. Edit the inventory.ini file and remove the node information:

    [tidb_servers]
172.16.10.4
#172.16.10.5  # the removed node

[pd_servers]
172.16.10.1
172.16.10.2
172.16.10.3

[tikv_servers]
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitored_servers]
172.16.10.4
#172.16.10.5  # the removed node
172.16.10.1
172.16.10.2
172.16.10.3
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitoring_servers]
172.16.10.3

[grafana_servers]
172.16.10.3

    Now the topology is as follows:

    Name Host IP Services
    node1 172.16.10.1 PD1
    node2 172.16.10.2 PD2
    node3 172.16.10.3 PD3, Monitor
    node4 172.16.10.4 TiDB1
    node5 172.16.10.5 TiDB2 removed
    node6 172.16.10.6 TiKV1
    node7 172.16.10.7 TiKV2
    node8 172.16.10.8 TiKV3
    node9 172.16.10.9 TiKV4

  3. Update the Prometheus configuration and restart the cluster:

    ansible-playbook rolling_update_monitor.yml --tags=prometheus

  4. Monitor the status of the entire cluster by opening a browser to access the monitoring platform: http://172.16.10.3:3000.

Decrease the capacity of a TiKV node

For example, if you want to remove a TiKV node (node9) with the IP address 172.16.10.9, take the following steps:

  1. Remove the node from the cluster using pd-ctl:

    1. View the store ID of node9:

      ./pd-ctl -u "http://172.16.10.1:2379" -d store

    2. Remove node9 from the cluster, assuming that the store ID is 10:

      ./pd-ctl -u "http://172.16.10.1:2379" -d store delete 10

  2. Use Grafana or pd-ctl to check whether the node is successfully removed:

    ./pd-ctl -u "http://172.16.10.1:2379" -d store 10

    Note: It takes some time to remove the node. If the status of the node you remove becomes Tombstone, then this node is successfully removed.

  3. After the node is successfully removed, stop the services on node9:

    ansible-playbook stop.yml -l 172.16.10.9

  4. Edit the inventory.ini file and remove the node information:

    [tidb_servers]
172.16.10.4
172.16.10.5

[pd_servers]
172.16.10.1
172.16.10.2
172.16.10.3

[tikv_servers]
172.16.10.6
172.16.10.7
172.16.10.8
#172.16.10.9  # the removed node

[monitored_servers]
172.16.10.4
172.16.10.5
172.16.10.1
172.16.10.2
172.16.10.3
172.16.10.6
172.16.10.7
172.16.10.8
#172.16.10.9  # the removed node

[monitoring_servers]
172.16.10.3

[grafana_servers]
172.16.10.3

    Now the topology is as follows:

    Name Host IP Services
    node1 172.16.10.1 PD1
    node2 172.16.10.2 PD2
    node3 172.16.10.3 PD3, Monitor
    node4 172.16.10.4 TiDB1
    node5 172.16.10.5 TiDB2
    node6 172.16.10.6 TiKV1
    node7 172.16.10.7 TiKV2
    node8 172.16.10.8 TiKV3
    node9 172.16.10.9 TiKV4 removed

  5. Update the Prometheus configuration and restart the cluster:

    ansible-playbook rolling_update_monitor.yml --tags=prometheus

  6. Monitor the status of the entire cluster by opening a browser to access the monitoring platform: http://172.16.10.3:3000.

Decrease the capacity of a PD node

For example, if you want to remove a PD node (node2) with the IP address 172.16.10.2, take the following steps:

  1. Remove the node from the cluster using pd-ctl:

    1. View the name of node2:

      ./pd-ctl -u "http://172.16.10.1:2379" -d member

    2. Remove node2 from the cluster, assuming that the name is pd2:

      ./pd-ctl -u "http://172.16.10.1:2379" -d member delete name pd2

  2. Use Grafana or pd-ctl to check whether the node is successfully removed:

    ./pd-ctl -u "http://172.16.10.1:2379" -d member

  3. After the node is successfully removed, stop the services on node2:

    ansible-playbook stop.yml -l 172.16.10.2

  4. Edit the inventory.ini file and remove the node information:

    [tidb_servers]
172.16.10.4
172.16.10.5

[pd_servers]
172.16.10.1
#172.16.10.2  # the removed node
172.16.10.3

[tikv_servers]
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitored_servers]
172.16.10.4
172.16.10.5
172.16.10.1
#172.16.10.2  # the removed node
172.16.10.3
172.16.10.6
172.16.10.7
172.16.10.8
172.16.10.9

[monitoring_servers]
172.16.10.3

[grafana_servers]
172.16.10.3

    Now the topology is as follows:

    Name Host IP Services
    node1 172.16.10.1 PD1
    node2 172.16.10.2 PD2 removed
    node3 172.16.10.3 PD3, Monitor
    node4 172.16.10.4 TiDB1
    node5 172.16.10.5 TiDB2
    node6 172.16.10.6 TiKV1
    node7 172.16.10.7 TiKV2
    node8 172.16.10.8 TiKV3
    node9 172.16.10.9 TiKV4

  5. Perform a rolling update to the entire TiDB cluster:

    ansible-playbook rolling_update.yml

  6. Update the Prometheus configuration and restart the cluster:

    ansible-playbook rolling_update_monitor.yml --tags=prometheus

  7. To monitor the status of the entire cluster, open a browser to access the monitoring platform: http://172.16.10.3:3000.