[ 0.000000] Linux version 5.10.5-heads (linux-x230-maximized.config@linuxboot) (x86_64-linux-musl-gcc (GCC) 8.3.0, GNU ld (GNU Binutils) 2.32) #0 SMP 1970-00-00 [ 0.000000] Command line: intel_iommu=igfx_off quiet loglevel=2 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007feb4fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007feb5000-0x00000000829fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed91fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047d5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: LENOVO 2324GT7/2324GT7, BIOS CBET4000 Heads-v0.2.0-1820-g7a08474-dirty 01/01/1970 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2893.294 MHz processor [ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000013] last_pfn = 0x47d600 max_arch_pfn = 0x400000000 [ 0.000014] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000015] last_pfn = 0x7feb5 max_arch_pfn = 0x400000000 [ 0.000376] RAMDISK: [mem 0x04000000-0x04456fff] [ 0.000379] ACPI: Early table checksum verification disabled [ 0.000382] ACPI: RSDP 0x000000007FECD000 000024 (v02 COREv4) [ 0.000385] ACPI: XSDT 0x000000007FECD0E0 00005C (v01 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000390] ACPI: FACP 0x000000007FED0B50 000114 (v06 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000395] ACPI: DSDT 0x000000007FECD280 0038CE (v02 COREv4 COREBOOT 20110725 INTL 20221020) [ 0.000398] ACPI: FACS 0x000000007FECD240 000040 [ 0.000400] ACPI: FACS 0x000000007FECD240 000040 [ 0.000403] ACPI: SSDT 0x000000007FED0C70 0017D8 (v02 COREv4 COREBOOT 0000002A CORE 20221020) [ 0.000406] ACPI: MCFG 0x000000007FED2450 00003C (v01 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000408] ACPI: TCPA 0x000000007FED2490 000032 (v02 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000411] ACPI: APIC 0x000000007FED24D0 000072 (v03 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000414] ACPI: DMAR 0x000000007FED2550 0000C0 (v01 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000417] ACPI: HPET 0x000000007FED2610 000038 (v01 COREv4 COREBOOT 00000000 CORE 20221020) [ 0.000423] ACPI: Local APIC address 0xfee00000 [ 0.000442] Zone ranges: [ 0.000442] DMA32 [mem 0x0000000000001000-0x00000000ffffffff] [ 0.000444] Normal [mem 0x0000000100000000-0x000000047d5fffff] [ 0.000445] Movable zone start for each node [ 0.000446] Early memory node ranges [ 0.000446] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.000447] node 0: [mem 0x0000000000100000-0x000000007feb4fff] [ 0.000448] node 0: [mem 0x0000000100000000-0x000000047d5fffff] [ 0.000550] Zeroed struct page in unavailable ranges: 11180 pages [ 0.000551] Initmem setup node 0 [mem 0x0000000000001000-0x000000047d5fffff] [ 0.000552] On node 0 totalpages: 4183124 [ 0.000553] DMA32 zone: 8186 pages used for memmap [ 0.000554] DMA32 zone: 22 pages reserved [ 0.000555] DMA32 zone: 523860 pages, LIFO batch:63 [ 0.004122] Normal zone: 57176 pages used for memmap [ 0.004124] Normal zone: 3659264 pages, LIFO batch:63 [ 0.029294] Reserving Intel graphics memory at [mem 0x80a00000-0x829fffff] [ 0.029482] ACPI: PM-Timer IO Port: 0x508 [ 0.029484] ACPI: Local APIC address 0xfee00000 [ 0.029490] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.029501] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.029503] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.029504] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.029505] ACPI: IRQ0 used by override. [ 0.029507] ACPI: IRQ9 used by override. [ 0.029509] Using ACPI (MADT) for SMP configuration information [ 0.029510] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.029513] TSC deadline timer available [ 0.029514] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.029519] [mem 0x82a00000-0xefffffff] available for PCI devices [ 0.029522] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.039287] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.039424] percpu: Embedded 43 pages/cpu s136472 r8192 d31464 u524288 [ 0.039427] pcpu-alloc: s136472 r8192 d31464 u524288 alloc=1*2097152 [ 0.039428] pcpu-alloc: [0] 0 1 2 3 [ 0.039440] Built 1 zonelists, mobility grouping on. Total pages: 4117740 [ 0.039441] Kernel command line: intel_iommu=igfx_off quiet loglevel=2 [ 0.039464] DMAR: Disable GFX device mapping [ 0.040258] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.040636] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.040674] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.100437] Memory: 16357868K/16732496K available (8194K kernel code, 1218K rwdata, 864K rodata, 856K init, 648K bss, 374372K reserved, 0K cma-reserved) [ 0.100466] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.100499] rcu: Hierarchical RCU implementation. [ 0.100500] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.100501] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.100502] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.100511] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.100727] random: crng done (trusting CPU's manufacturer) [ 0.100746] Console: colour dummy device 80x25 [ 0.100754] printk: console [tty0] enabled [ 0.100757] ACPI: Core revision 20200925 [ 0.100815] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.100829] APIC: Switch to symmetric I/O mode setup [ 0.101184] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.120830] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x29b483f0c36, max_idle_ns: 440795226749 ns [ 0.120835] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.58 BogoMIPS (lpj=11573176) [ 0.120837] pid_max: default: 4096 minimum: 301 [ 0.120878] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.120907] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.121002] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.121010] process: using mwait in idle threads [ 0.121012] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.121013] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.121015] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.121016] Spectre V2 : Mitigation: Full generic retpoline [ 0.121017] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.121018] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.121019] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.121020] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.121021] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.121023] SRBDS: Vulnerable: No microcode [ 0.121024] MDS: Mitigation: Clear CPU buffers [ 0.121097] Freeing SMP alternatives memory: 12K [ 0.121226] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.121289] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.121297] ... version: 3 [ 0.121298] ... bit width: 48 [ 0.121298] ... generic registers: 4 [ 0.121299] ... value mask: 0000ffffffffffff [ 0.121300] ... max period: 00007fffffffffff [ 0.121300] ... fixed-purpose events: 3 [ 0.121301] ... event mask: 000000070000000f [ 0.121383] rcu: Hierarchical SRCU implementation. [ 0.121578] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.121609] smp: Bringing up secondary CPUs ... [ 0.121657] x86: Booting SMP configuration: [ 0.121658] .... node #0, CPUs: #1 [ 0.123999] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.123999] #2 #3 [ 0.127207] smp: Brought up 1 node, 4 CPUs [ 0.127207] smpboot: Max logical packages: 1 [ 0.127207] smpboot: Total of 4 processors activated (23146.35 BogoMIPS) [ 0.127207] devtmpfs: initialized [ 0.127207] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.127207] futex hash table entries: 16 (order: -2, 1024 bytes, linear) [ 0.127207] NET: Registered protocol family 16 [ 0.127207] thermal_sys: Registered thermal governor 'step_wise' [ 0.127207] cpuidle: using governor menu [ 0.127207] ACPI: bus type PCI registered [ 0.127207] PCI: Using configuration type 1 for base access [ 0.127207] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.128847] cryptd: max_cpu_qlen set to 1000 [ 0.128861] ACPI: Added _OSI(Module Device) [ 0.128862] ACPI: Added _OSI(Processor Device) [ 0.128862] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.128863] ACPI: Added _OSI(Processor Aggregator Device) [ 0.128864] ACPI: Added _OSI(Linux-Dell-Video) [ 0.128865] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.128866] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.129435] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.130096] ACPI: EC: EC started [ 0.130097] ACPI: EC: interrupt blocked [ 0.130384] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.130386] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC used to handle transactions [ 0.130387] ACPI: Interpreter enabled [ 0.130392] ACPI: (supports S0 S5) [ 0.130393] ACPI: Using IOAPIC for interrupt routing [ 0.130406] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.130508] ACPI: Enabled 1 GPEs in block 00 to 3F [ 0.133489] ACPI: Power Resource [FPWR] (off) [ 0.133773] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.133777] acpi PNP0A08:00: _OSC: OS supports [Segments MSI HPX-Type3] [ 0.133791] acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control [ 0.133864] PCI host bridge to bus 0000:00 [ 0.133866] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.133867] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.133868] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.133869] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.133871] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.133872] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.133873] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.133874] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.133875] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.133876] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.133877] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.133878] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.133879] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.133880] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.133881] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.133883] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] [ 0.133884] pci_bus 0000:00: root bus resource [mem 0x82a00000-0xefffffff window] [ 0.133885] pci_bus 0000:00: root bus resource [mem 0x47d600000-0xfffffffff window] [ 0.133886] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window] [ 0.133887] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.133897] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.133966] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.133975] pci 0000:00:02.0: reg 0x10: [mem 0x82c00000-0x82ffffff 64bit] [ 0.133980] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] [ 0.133984] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f] [ 0.133994] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.134046] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000 [ 0.134053] pci 0000:00:04.0: reg 0x10: [mem 0x83830000-0x83837fff 64bit] [ 0.134137] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.134155] pci 0000:00:14.0: reg 0x10: [mem 0x83820000-0x8382ffff 64bit] [ 0.134221] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.134325] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.134405] pci 0000:00:16.0: reg 0x10: [mem 0x83842000-0x8384200f 64bit] [ 0.134731] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.134844] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.134857] pci 0000:00:19.0: reg 0x10: [mem 0x83800000-0x8381ffff] [ 0.134865] pci 0000:00:19.0: reg 0x14: [mem 0x8383c000-0x8383cfff] [ 0.134874] pci 0000:00:19.0: reg 0x18: [io 0x1040-0x105f] [ 0.134931] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.134991] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.135007] pci 0000:00:1a.0: reg 0x10: [mem 0x8383f000-0x8383f3ff] [ 0.135086] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.135145] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.135162] pci 0000:00:1b.0: reg 0x10: [mem 0x83838000-0x8383bfff 64bit] [ 0.135228] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.135286] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.136835] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.136835] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.136835] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.136835] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.136835] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.136835] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.136835] pci 0000:00:1d.0: reg 0x10: [mem 0x83840000-0x838403ff] [ 0.136835] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.136835] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.136835] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.136835] pci 0000:00:1f.2: reg 0x10: [io 0x1080-0x1087] [ 0.136835] pci 0000:00:1f.2: reg 0x14: [io 0x1090-0x1093] [ 0.136835] pci 0000:00:1f.2: reg 0x18: [io 0x1088-0x108f] [ 0.136835] pci 0000:00:1f.2: reg 0x1c: [io 0x1094-0x1097] [ 0.136835] pci 0000:00:1f.2: reg 0x20: [io 0x1060-0x107f] [ 0.136835] pci 0000:00:1f.2: reg 0x24: [mem 0x8383e000-0x8383e7ff] [ 0.136835] pci 0000:00:1f.2: PME# supported from D3hot [ 0.136835] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.136835] pci 0000:00:1f.3: reg 0x10: [mem 0x83841000-0x838410ff 64bit] [ 0.136835] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] [ 0.136835] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000 [ 0.136835] pci 0000:00:1f.6: reg 0x10: [mem 0x8383d000-0x8383dfff 64bit] [ 0.136835] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501 [ 0.136835] pci 0000:01:00.0: reg 0x10: [mem 0x82a00000-0x82a000ff] [ 0.137037] pci 0000:01:00.0: supports D1 D2 [ 0.137038] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.137125] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.137134] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff] [ 0.137220] pci 0000:02:00.0: [168c:0030] type 00 class 0x028000 [ 0.137267] pci 0000:02:00.0: reg 0x10: [mem 0x82b00000-0x82b1ffff 64bit] [ 0.137350] pci 0000:02:00.0: reg 0x30: [mem 0x82b20000-0x82b2ffff pref] [ 0.137459] pci 0000:02:00.0: supports D1 [ 0.137460] pci 0000:02:00.0: PME# supported from D0 D1 D3hot [ 0.137530] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.137537] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff] [ 0.137576] pci 0000:00:1c.2: PCI bridge to [bus 03-0b] [ 0.137580] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] [ 0.137584] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff] [ 0.137592] pci 0000:00:1c.2: bridge window [mem 0x47d600000-0x48d5fffff 64bit pref] [ 0.137621] pci_bus 0000:00: on NUMA node 0 [ 0.137738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137777] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137814] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137850] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137885] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137921] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137957] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.137993] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.138675] ACPI: EC: interrupt unblocked [ 0.138676] ACPI: EC: event unblocked [ 0.138682] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.138682] ACPI: EC: GPE=0x11 [ 0.138684] ACPI: \_SB_.PCI0.LPCB.EC__: Boot DSDT EC initialization complete [ 0.138685] ACPI: \_SB_.PCI0.LPCB.EC__: EC: Used to handle transactions and events [ 0.138717] iommu: Default domain type: Translated [ 0.138717] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.138717] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.138717] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.138717] vgaarb: loaded [ 0.138717] SCSI subsystem initialized [ 0.138717] libata version 3.00 loaded. [ 0.138717] ACPI: bus type USB registered [ 0.138717] usbcore: registered new interface driver usbfs [ 0.138717] usbcore: registered new interface driver hub [ 0.138717] usbcore: registered new device driver usb [ 0.138717] PCI: Using ACPI for IRQ routing [ 0.138717] PCI: pci_cache_line_size set to 64 bytes [ 0.138717] e820: reserve RAM buffer [mem 0x7feb5000-0x7fffffff] [ 0.138717] e820: reserve RAM buffer [mem 0x47d600000-0x47fffffff] [ 0.138717] clocksource: Switched to clocksource tsc-early [ 0.138717] pnp: PnP ACPI init [ 0.138717] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.138717] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.138717] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.138717] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.138717] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved [ 0.138717] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.138717] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.138717] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.138717] system 00:00: [mem 0x20000000-0x201fffff] could not be reserved [ 0.138717] system 00:00: [mem 0x40000000-0x401fffff] could not be reserved [ 0.138717] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.138717] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.138717] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.138717] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.138717] system 00:02: [io 0x0480-0x04bf] has been reserved [ 0.138717] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.138717] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.138717] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.138717] pnp 00:05: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.138717] pnp 00:06: Plug and Play ACPI device, IDs PNP0c31 (active) [ 0.138717] pnp: PnP ACPI: found 7 devices [ 0.142604] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.142604] NET: Registered protocol family 2 [ 0.142604] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.142604] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.142604] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.142604] TCP: Hash tables configured (established 131072 bind 65536) [ 0.142604] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.142604] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.142604] NET: Registered protocol family 1 [ 0.142604] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.142604] pci 0000:00:1c.0: bridge window [mem 0x82a00000-0x82afffff] [ 0.142604] pci 0000:00:1c.1: PCI bridge to [bus 02] [ 0.142604] pci 0000:00:1c.1: bridge window [mem 0x82b00000-0x82bfffff] [ 0.142604] pci 0000:00:1c.2: PCI bridge to [bus 03-0b] [ 0.142604] pci 0000:00:1c.2: bridge window [io 0x2000-0x3fff] [ 0.142604] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x837fffff] [ 0.142604] pci 0000:00:1c.2: bridge window [mem 0x47d600000-0x48d5fffff 64bit pref] [ 0.142604] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.142604] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.142604] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.142604] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.142604] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.142604] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.142604] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.142604] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.142604] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.142604] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.142604] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.142604] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.142604] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.142604] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.142604] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.142604] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] [ 0.142604] pci_bus 0000:00: resource 20 [mem 0x82a00000-0xefffffff window] [ 0.142604] pci_bus 0000:00: resource 21 [mem 0x47d600000-0xfffffffff window] [ 0.142604] pci_bus 0000:00: resource 22 [mem 0xfed40000-0xfed44fff window] [ 0.142604] pci_bus 0000:01: resource 1 [mem 0x82a00000-0x82afffff] [ 0.142604] pci_bus 0000:02: resource 1 [mem 0x82b00000-0x82bfffff] [ 0.142604] pci_bus 0000:03: resource 0 [io 0x2000-0x3fff] [ 0.142604] pci_bus 0000:03: resource 1 [mem 0x83000000-0x837fffff] [ 0.142604] pci_bus 0000:03: resource 2 [mem 0x47d600000-0x48d5fffff 64bit pref] [ 0.142604] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.143331] PCI: CLS 64 bytes, default 64 [ 0.143331] Trying to unpack rootfs image as initramfs... [ 0.541045] Freeing initrd memory: 4444K [ 0.541065] DMAR: Host address width 36 [ 0.541067] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.541080] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.541081] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.541084] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.541085] DMAR: RMRR base: 0x00000080800000 end: 0x000000829fffff [ 0.541098] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.541100] software IO TLB: mapped [mem 0x000000007beb5000-0x000000007feb5000] (64MB) [ 0.541507] workingset: timestamp_bits=62 max_order=22 bucket_order=0 [ 0.542079] NET: Registered protocol family 38 [ 0.542087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.542088] io scheduler mq-deadline registered [ 0.542139] efifb: probing for efifb [ 0.542150] efifb: framebuffer at 0x90000000, using 4128k, total 4128k [ 0.542151] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 0.542152] efifb: scrolling: redraw [ 0.542153] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.542222] Console: switching to colour frame buffer device 170x48 [ 0.544480] fb0: EFI VGA frame buffer device [ 0.544679] ACPI: AC Adapter [AC] (off-line) [ 0.544722] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0E:00/input/input0 [ 0.544725] ACPI: Sleep Button [SLPB] [ 0.544748] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:29/PNP0C09:00/PNP0C0D:00/input/input1 [ 0.544749] ACPI: Lid Switch [LID] [ 0.544774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.544776] ACPI: Power Button [PWRF] [ 0.544839] Monitor-Mwait will be used to enter C-1 state [ 0.544846] Monitor-Mwait will be used to enter C-2 state [ 0.544850] Monitor-Mwait will be used to enter C-3 state [ 0.544854] ACPI: \_SB_.CP00: Found 3 idle states [ 0.544966] ACPI: \_SB_.CP01: Found 3 idle states [ 0.545063] ACPI: \_SB_.CP02: Found 3 idle states [ 0.545211] ACPI: \_SB_.CP03: Found 3 idle states [ 0.546219] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.546220] ACPI: Thermal Zone [THM0] (60 C) [ 0.546929] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.546930] ACPI: Thermal Zone [THM1] (27 C) [ 0.546974] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.552882] tpm_tis 00:06: 1.2 TPM (device-id 0x0, rev-id 78) [ 0.555946] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.556049] battery: ACPI: Battery Slot [BAT1] (battery absent) [ 0.557091] ACPI: \_SB_.CP00: Found 3 idle states [ 0.557104] ACPI: \_SB_.CP00: Found 3 idle states [ 0.557146] ACPI: \_SB_.CP01: Found 3 idle states [ 0.557184] ACPI: \_SB_.CP02: Found 3 idle states [ 0.557219] ACPI: \_SB_.CP03: Found 3 idle states [ 0.569091] ACPI: \_SB_.CP00: Found 3 idle states [ 0.569104] ACPI: \_SB_.CP00: Found 3 idle states [ 0.569145] ACPI: \_SB_.CP01: Found 3 idle states [ 0.569184] ACPI: \_SB_.CP02: Found 3 idle states [ 0.569219] ACPI: \_SB_.CP03: Found 3 idle states [ 0.630264] brd: module loaded [ 0.630881] loop: module loaded [ 0.630889] Loading iSCSI transport class v2.0-870. [ 0.631003] ahci 0000:00:1f.2: version 3.0 [ 0.631135] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.631159] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode [ 0.631161] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst [ 0.631426] scsi host0: ahci [ 0.631499] scsi host1: ahci [ 0.631557] scsi host2: ahci [ 0.631612] scsi host3: ahci [ 0.631669] scsi host4: ahci [ 0.631723] scsi host5: ahci [ 0.631747] ata1: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e100 irq 24 [ 0.631750] ata2: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e180 irq 24 [ 0.631752] ata3: SATA max UDMA/133 abar m2048@0x8383e000 port 0x8383e200 irq 24 [ 0.631753] ata4: DUMMY [ 0.631753] ata5: DUMMY [ 0.631754] ata6: DUMMY [ 0.631811] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.633327] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.633330] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.633364] mousedev: PS/2 mouse device common for all mice [ 0.633404] rtc_cmos 00:03: RTC can wake from S4 [ 0.633537] rtc_cmos 00:03: registered as rtc0 [ 0.633560] rtc_cmos 00:03: setting system clock to 2023-10-06T17:27:05 UTC (1696613225) [ 0.633569] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.633607] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 0.633649] intel_pstate: Intel P-state driver initializing [ 0.633896] NET: Registered protocol family 17 [ 0.634005] IPI shorthand broadcast: enabled [ 0.634007] AVX version of gcm_enc/dec engaged. [ 0.634007] AES CTR mode by8 optimization enabled [ 0.634202] sched_clock: Marking stable (634069927, 129854)->(639609561, -5409780) [ 0.634872] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.944874] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.945313] ata1.00: supports DRM functions and may not be fully accessible [ 0.946085] ata1.00: ATA-11: Samsung SSD 860 QVO 1TB, RVQ01B6Q, max UDMA/133 [ 0.946086] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 0.948492] ata1.00: supports DRM functions and may not be fully accessible [ 0.950462] ata1.00: configured for UDMA/133 [ 0.950567] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 0.950640] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.950690] ata1.00: Enabling discard_zeroes_data [ 0.950723] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 0.950729] sd 0:0:0:0: [sda] Write Protect is off [ 0.950731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.950739] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.951083] sda: sda1 sda2 [ 0.951285] ata1.00: Enabling discard_zeroes_data [ 0.951344] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.272167] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.280113] ata2.00: ATA-9: Fanxiang S101/240GB, S0424A0, max UDMA/133 [ 1.280115] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.292356] ata2.00: configured for UDMA/133 [ 1.292397] scsi 1:0:0:0: Direct-Access ATA Fanxiang S101/24 4A0 PQ: 0 ANSI: 5 [ 1.292486] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.292564] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB) [ 1.292570] sd 1:0:0:0: [sdb] Write Protect is off [ 1.292571] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.292580] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.293897] sdb: sdb1 [ 1.294088] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.417699] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] [ 1.448647] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] [ 1.509295] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 [ 1.509300] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 1.547260] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 1.572866] tsc: Refined TSC clocksource calibration: 2893.426 MHz [ 1.572879] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29b500ca33a, max_idle_ns: 440795203665 ns [ 1.572953] clocksource: Switched to clocksource tsc [ 1.608873] ata3: SATA link down (SStatus 0 SControl 300) [ 1.609242] Freeing unused kernel image (initmem) memory: 856K [ 1.609244] Write protecting the kernel read-only data: 12288k [ 1.609664] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 1.609875] Freeing unused kernel image (rodata/data gap) memory: 1184K [ 1.609876] Run /init as init process [ 1.609877] with arguments: [ 1.609878] /init [ 1.609878] with environment: [ 1.609879] HOME=/ [ 1.609879] TERM=linux [ 1.609880] intel_iommu=igfx_off [ 1.610412] [U] hello world [ 1.614365] DEBUG: Debug output enabled from board CONFIG_DEBUG_OUTPUT=y option [ 1.614653] TRACE: Under init [ 1.617629] TRACE: Under /bin/tpmr [ 1.621703] TRACE: Under /bin/cbfs-init [ 1.635133] TRACE: Under /bin/tpmr [ 1.636914] DEBUG: Direct translation from tpmr to tpm1 call [ 1.637382] DEBUG: exec tpm extend -ix 7 -if /tmp/cbfs.125 [ 1.654664] TRACE: Under /bin/tpmr [ 1.656427] DEBUG: Direct translation from tpmr to tpm1 call [ 1.656979] DEBUG: exec tpm extend -ix 7 -if /tmp/cbfs.125 [ 1.673933] TRACE: Under /bin/tpmr [ 1.675754] DEBUG: Direct translation from tpmr to tpm1 call [ 1.676221] DEBUG: exec tpm extend -ix 7 -if /tmp/cbfs.125 [ 1.691921] TRACE: Under /bin/key-init [ 1.759667] TRACE: Under /etc/ash_functions:combine_configs [ 1.868672] TRACE: Under /bin/setconsolefont.sh [ 1.869148] DEBUG: Board does not ship setfont, not checking console font [ 1.880045] TRACE: Under /bin/gui-init, start [ 1.880579] TRACE: Under /etc/ash_functions:enable_usb [ 1.883654] TRACE: Under insmod.sh [ 1.884193] DEBUG: Extending PCR 5 with /lib/modules/ehci-hcd.ko [ 1.887165] TRACE: Under /bin/tpmr [ 1.888948] DEBUG: Direct translation from tpmr to tpm1 call [ 1.889431] DEBUG: exec tpm extend -ix 5 -if /lib/modules/ehci-hcd.ko [ 1.901534] DEBUG: Loading /lib/modules/ehci-hcd.ko with busybox insmod [ 1.902257] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.905483] TRACE: Under insmod.sh [ 1.906023] DEBUG: Extending PCR 5 with /lib/modules/ehci-pci.ko [ 1.908984] TRACE: Under /bin/tpmr [ 1.910745] DEBUG: Direct translation from tpmr to tpm1 call [ 1.911221] DEBUG: exec tpm extend -ix 5 -if /lib/modules/ehci-pci.ko [ 1.921534] DEBUG: Loading /lib/modules/ehci-pci.ko with busybox insmod [ 1.922608] ehci-pci: EHCI PCI platform driver [ 1.923395] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.924075] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.924768] ehci-pci 0000:00:1a.0: debug port 2 [ 1.929355] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.930020] ehci-pci 0000:00:1a.0: irq 19, io mem 0x8383f000 [ 1.944879] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.945686] hub 1-0:1.0: USB hub found [ 1.946333] hub 1-0:1.0: 3 ports detected [ 1.947098] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.947750] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.948417] ehci-pci 0000:00:1d.0: debug port 2 [ 1.953007] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.953730] ehci-pci 0000:00:1d.0: irq 18, io mem 0x83840000 [ 1.968868] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.969003] hub 2-0:1.0: USB hub found [ 1.970261] hub 2-0:1.0: 3 ports detected [ 1.974352] TRACE: Under insmod.sh [ 1.975514] DEBUG: Extending PCR 5 with /lib/modules/xhci-hcd.ko [ 1.979115] TRACE: Under /bin/tpmr [ 1.981542] DEBUG: Direct translation from tpmr to tpm1 call [ 1.982655] DEBUG: exec tpm extend -ix 5 -if /lib/modules/xhci-hcd.ko [ 1.998142] DEBUG: Loading /lib/modules/xhci-hcd.ko with busybox insmod [ 2.002996] TRACE: Under insmod.sh [ 2.004171] DEBUG: Extending PCR 5 with /lib/modules/xhci-pci.ko [ 2.007785] TRACE: Under /bin/tpmr [ 2.010225] DEBUG: Direct translation from tpmr to tpm1 call [ 2.011340] DEBUG: exec tpm extend -ix 5 -if /lib/modules/xhci-pci.ko [ 2.026182] DEBUG: Loading /lib/modules/xhci-pci.ko with busybox insmod [ 2.027394] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.028100] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.029858] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x000000000000b930 [ 2.030581] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.031428] hub 3-0:1.0: USB hub found [ 2.032143] hub 3-0:1.0: 4 ports detected [ 2.032931] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.033633] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.034335] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.035103] hub 4-0:1.0: USB hub found [ 2.035798] hub 4-0:1.0: 4 ports detected [ 2.280863] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.304863] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.367807] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062] [ 2.368863] usb 3-3: new high-speed USB device number 2 using xhci_hcd [ 2.399624] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..] [ 2.437841] hub 1-1:1.0: USB hub found [ 2.438697] hub 1-1:1.0: 6 ports detected [ 2.461330] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800/0x0, board id: 1611, fw id: 1099905 [ 2.462074] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.463086] hub 2-1:1.0: USB hub found [ 2.463922] hub 2-1:1.0: 8 ports detected [ 2.501183] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.517376] hub 3-3:1.0: USB hub found [ 2.518164] hub 3-3:1.0: 4 ports detected [ 2.728863] usb 1-1.2: new high-speed USB device number 3 using ehci-pci [ 2.920866] usb 1-1.6: new high-speed USB device number 4 using ehci-pci [ 3.842352] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8 [ 4.040828] TRACE: Under /etc/functions:detect_boot_device [ 4.046436] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.048608] TRACE: Under /bin/gui-init:mount_boot [ 4.056041] TRACE: Under /bin/gui-init:check_gpg_key [ 4.058654] TRACE: Under /bin/gui-init:update_totp [ 4.062641] TRACE: Under /bin/unseal-totp [ 4.066424] TRACE: Under /bin/tpmr [ 4.068999] TRACE: Under /bin/tpmr:tpm1_unseal [ 4.569456] DEBUG: Running at_exit handlers [ 4.570683] TRACE: Under /bin/tpmr:cleanup_shred [ 4.572438] !!! ERROR: Unable to unseal totp secret !!! [ 5.249701] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio3/input/input9 [ 7.083006] TRACE: Under /bin/unseal-totp [ 7.086724] TRACE: Under /bin/tpmr [ 7.089250] TRACE: Under /bin/tpmr:tpm1_unseal [ 7.581467] DEBUG: Running at_exit handlers [ 7.582667] TRACE: Under /bin/tpmr:cleanup_shred [ 7.584375] !!! ERROR: Unable to unseal totp secret !!! [ 10.095019] TRACE: Under /bin/unseal-totp [ 10.098709] TRACE: Under /bin/tpmr [ 10.101171] TRACE: Under /bin/tpmr:tpm1_unseal [ 10.593468] DEBUG: Running at_exit handlers [ 10.594642] TRACE: Under /bin/tpmr:cleanup_shred [ 10.596314] !!! ERROR: Unable to unseal totp secret !!! [ 12.601011] DEBUG: CONFIG_TPM: y [ 12.602123] DEBUG: CONFIG_TPM2_TOOLS: [ 12.603219] DEBUG: Show PCRs [ 12.905528] DEBUG: PCR-00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.905528] PCR-01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.905528] PCR-02: 83 32 F4 FC 3F 97 DF 0E 8A E5 B3 5C BD C7 A5 D1 B8 17 AD 1F [ 12.905528] PCR-03: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.905528] PCR-04: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.905528] PCR-05: 4E 7C EF FF E8 65 2B 49 3B C8 DC 57 D3 DC 4F 03 E4 02 17 69 [ 12.905528] PCR-06: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 12.905528] PCR-07: EB 53 23 C0 C3 79 11 B3 C0 E9 11 FD C6 D0 9E 1F 3B FC 46 22 [ 15.173903] TRACE: Under /bin/gui-init:generate_totp_hotp [ 15.179392] TRACE: Under /bin/seal-totp [ 15.181531] DEBUG: Sealing TOTP with actual state of PCR0-3 [ 15.185324] TRACE: Under /bin/tpmr [ 15.187742] TRACE: Under /bin/tpmr:tpm1_pcrread [ 15.189074] DEBUG: tpm pcrread -ix 0 [ 15.208763] TRACE: Under /bin/tpmr [ 15.211187] TRACE: Under /bin/tpmr:tpm1_pcrread [ 15.212504] DEBUG: tpm pcrread -ix 1 [ 15.228648] TRACE: Under /bin/tpmr [ 15.231060] TRACE: Under /bin/tpmr:tpm1_pcrread [ 15.232337] DEBUG: tpm pcrread -ix 2 [ 15.248678] TRACE: Under /bin/tpmr [ 15.251043] TRACE: Under /bin/tpmr:tpm1_pcrread [ 15.252318] DEBUG: tpm pcrread -ix 3 [ 15.266120] DEBUG: Sealing TOTP with boot state of PCR4 (Going to recovery shell extends PCR4) [ 15.269837] TRACE: Under /bin/tpmr [ 15.272229] TRACE: Under /bin/tpmr:replay_pcr [ 15.276261] DEBUG: Replayed cbmem -L clean boot state of PCR=4 ALG=sha1 : 0000000000000000000000000000000000000000 [ 15.277547] DEBUG: Sealing TOTP neglecting PCR5 involvement (Dynamically loaded kernel modules are not firmware integrity attestation related) [ 15.278681] DEBUG: Sealing TOTP without PCR6 involvement (LUKS header consistency is not firmware integrity attestation related) [ 15.282329] TRACE: Under /bin/tpmr [ 15.284750] TRACE: Under /bin/tpmr:tpm1_pcrread [ 15.286127] DEBUG: tpm pcrread -ix 7 [ 15.304686] TRACE: Under /bin/tpmr [ 15.307177] TRACE: Under /bin/tpmr:tpm1_seal [ 15.697499] DEBUG: Running at_exit handlers [ 15.698645] TRACE: Under /bin/tpmr:cleanup_shred [ 16.309650] TRACE: Under /bin/seal-hotpkey [ 16.313591] DEBUG: Sealing HOTP secret reuses TOTP sealed secret... [ 16.317131] TRACE: Under /bin/tpmr [ 16.319510] TRACE: Under /bin/tpmr:tpm1_unseal [ 16.857501] DEBUG: Running at_exit handlers [ 16.858597] TRACE: Under /bin/tpmr:cleanup_shred [ 16.860229] TRACE: Under /bin/seal-hotpkey:mount_boot [ 16.861804] TRACE: Under /etc/ash_functions:enable_usb [ 19.104512] DEBUG: Signature key was created at Mon Dec 30 23:34:16 UTC 2019 [ 19.106882] DEBUG: Admin PIN retry counter is 3 [ 26.501484] EXT4-fs (sda1): re-mounted. Opts: (null) [ 26.510767] EXT4-fs (sda1): re-mounted. Opts: (null) [ 27.522597] TRACE: Under /bin/gui-init:update_totp [ 27.525842] TRACE: Under /bin/unseal-totp [ 27.528811] TRACE: Under /bin/tpmr [ 27.530637] TRACE: Under /bin/tpmr:tpm1_unseal [ 28.069499] DEBUG: Running at_exit handlers [ 28.070005] TRACE: Under /bin/tpmr:cleanup_shred [ 28.072145] TRACE: Under /etc/functions:reseal_tpm_disk_decryption_key [ 28.072645] DEBUG: TPM Disk Unlock Key is allowed in board configs. Continuing [ 28.075793] DEBUG: No TPM disk decryption key to reseal [ 28.076339] TRACE: Under /bin/gui-init:update_hotp [ 28.079144] TRACE: Under /bin/unseal-hotp [ 28.079597] TRACE: Under /bin/unseal-hotp:mount_boot_or_die [ 28.080939] DEBUG: Unsealing HOTP secret reuses TOTP sealed secret... [ 28.083994] TRACE: Under /bin/tpmr [ 28.085833] TRACE: Under /bin/tpmr:tpm1_unseal [ 28.621502] DEBUG: Running at_exit handlers [ 28.622005] TRACE: Under /bin/tpmr:cleanup_shred [ 28.627397] EXT4-fs (sda1): re-mounted. Opts: (null) [ 28.635374] EXT4-fs (sda1): re-mounted. Opts: (null) [ 31.681220] TRACE: Under gui-init:while true loop [ 31.681725] TRACE: Under /bin/gui-init:show_main_menu [ 33.891138] TRACE: Under /bin/gui-init:show_options_menu [ 35.729888] TRACE: Under /etc/ash_functions:recovery [ 35.734885] TRACE: Under /bin/tpmr [ 35.736687] DEBUG: Direct translation from tpmr to tpm1 call [ 35.737176] DEBUG: exec tpm extend -ix 4 -ic recovery [ 41.093759] TRACE: Under /bin/mount-usb [ 41.094368] DEBUG: Parameters: --mode=rw, --device=empty, --mountpoint=/media, --pass= [ 41.094871] TRACE: Under /etc/ash_functions:enable_usb [ 41.099868] TRACE: Under insmod.sh [ 41.100405] DEBUG: Extending PCR 5 with /lib/modules/usb-storage.ko [ 41.103362] TRACE: Under /bin/tpmr [ 41.105142] DEBUG: Direct translation from tpmr to tpm1 call [ 41.106154] DEBUG: exec tpm extend -ix 5 -if /lib/modules/usb-storage.ko [ 41.117506] DEBUG: Loading /lib/modules/usb-storage.ko with busybox insmod [ 41.119063] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 41.119731] scsi host6: usb-storage 1-1.2:1.0 [ 41.120374] usbcore: registered new interface driver usb-storage [ 41.122092] TRACE: Under /etc/functions:list_usb_storage [ 41.123188] DEBUG: Listing USB storage devices (including partitions) [ 42.129093] TRACE: Under /etc/functions:list_usb_storage [ 42.130181] DEBUG: Listing USB storage devices (including partitions) [ 42.152146] scsi 6:0:0:0: Direct-Access Nitrokey Nitrokey Storage 1.00 PQ: 0 ANSI: 0 [ 42.155756] scsi 6:0:0:1: Direct-Access Nitrokey Nitrokey Storage 1.00 PQ: 0 ANSI: 0 [ 42.156600] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 42.157332] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 42.159623] sd 6:0:0:0: [sdc] 4194304 512-byte logical blocks: (2.15 GB/2.00 GiB) [ 42.163868] sd 6:0:0:0: [sdc] Write Protect is off [ 42.164533] sd 6:0:0:0: [sdc] Mode Sense: 1b 00 00 00 [ 42.166070] sd 6:0:0:0: [sdc] No Caching mode page found [ 42.166691] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 42.198696] sd 6:0:0:1: [sdd] Attached SCSI removable disk [ 42.204008] sdc: sdc1 [ 42.212373] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 43.137134] TRACE: Under /etc/functions:list_usb_storage [ 43.138270] DEBUG: Listing USB storage devices (including partitions) [ 43.140805] DEBUG: USB storage device of size greater then 0: /sys/block/sdc [ 43.155661] DEBUG: USB storage device with partition table: /dev/sdc [ 43.157598] DEBUG: Cleaning /media directory [ 43.159272] TRACE: Under /etc/functions:list_usb_storage [ 43.160373] DEBUG: Listing USB storage devices (including partitions) [ 43.163018] DEBUG: USB storage device of size greater then 0: /sys/block/sdc [ 43.182717] DEBUG: USB storage device with partition table: /dev/sdc [ 43.186315] DEBUG: Checking if /dev/sdc1 is a LUKS device/partition [ 43.235100] DEBUG: Selected USB partition is not a LUKS device, continuing... [ 43.236303] DEBUG: Mounting /dev/sdc1 as read-write [ 43.274007] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.