Systeminfo Binding

Introduction

System information binding provides operating system monitoring data including:

• System memory, swap, cpu, load average, uptime
• Per-process memory, cpu
• File system metrics
• Network interface metrics

Binding uses Hyperic SIGAR API to access system information regardless of the underlying platform (Windows, Linux, OS X...).

For installation of the binding, please see Wiki page Bindings.

Generic Item Binding Configuration

openhab.cfg file (in the folder '${openhab_home}/configurations').

############################### Systeminfo Binding ####################################
#
# Interval in milliseconds when to find new refresh candidates
# (optional, defaults to 1000)
#systeminfo:granularity=

# Data Storage Unit, where B=Bytes, K=kB, M=MB, T=TB (optional, defaults to M)
#systeminfo:units=

Hyperic SIGAR Native libraries

The SystemInformation binding does not include SIGAR native libraries currently. The platform dependent Sigar native libraries can be found here for several platforms (see sigar-bin/lib folder). The Pre-built libraries need to be moved into the ${openhabhome]/lib folder. ARM-based devices, such as Raspberry PI require manual setup. See discussion.

Item Binding Configuration

In order to bind an item to the device, you need to provide configuration settings. The easiest way to do so is to add some binding information in your item file (in the folder configurations/items). The syntax of the binding configuration strings accepted is the following:

systeminfo="<commandType>:<refreshPeriod>(<target>)"

Where

<commandType> corresponds to the command type. See complete list below. Note that the output of some commands (eg. DirUsage) will be affected by filesystem permissions. ie. Directories that the process is not permitted access to cannot be include in the tally.

<refreshPeriod> corresponds to the update interval of the item in milliseconds.

<target> corresponds to the target of the command. Target field is mandatory only for commands, which need target. See further details from supported command list below.

List of supported commands (commandType)

Command	Item Type	Purpose	Note
LoadAverage1Min	Number
LoadAverage5Min	Number
LoadAverage15Min	Number
CpuCombined	Number
CpuUser	Number
CpuSystem	Number
CpuNice	Number
CpuWait	Number
Uptime	Number
UptimeFormatted	String
MemFree	Number
MemFreePercent	Number
MemUsed	Number
MemUsedPercent	Number
MemActualFree	Number
MemActualUsed	Number
MemTotal	Number
SwapFree	Number
SwapTotal	Number
SwapUsed	Number
SwapPageIn	Number
SwapPageOut	Number
NetTxBytes	Number		target = net interface name (1
NetRxBytes	Number		target = net interface name (1
DiskReads	Number		target = disk name (2
DiskWrites	Number		target = disk name (2
DiskReadBytes	Number		target = disk name (2
DiskWriteBytes	Number		target = disk name (2
DirUsage	Number		target = directory path (if folder contains lot of files scan can take a while!)
DirFiles	Number		target = directory path (if folder contains lot of files scan can take a while!)
ProcessRealMem	Number		target = process name (3
ProcessVirtualMem	Number		target = process name (3
ProcessCpuPercent	Number		target = process name (3
ProcessCpuSystem	Number		target = process name (3
ProcessCpuUser	Number		target = process name (3
ProcessCpuTotal	Number		target = process name (3
ProcessUptime	Number		target = process name (3
ProcessUptimeFormatted	String		target = process name (3
ProcessCpuPercent	Number		target = process name (3

(1 interface name: Check supported interface names by ifconfig, ipconfig or openhab debug log E.g. "21:56:12.930 DEBUG o.o.b.s.internal.SysteminfoBinding[- valid net interfaces: lo0, en0, en1, p2p0, vboxnet0

(2 disk name: Check supported disk names by iostat or openhab debug log "21:56:12.931 DEBUG o.o.b.s.internal.SysteminfoBinding[- valid disk names: /dev/disk0s2"

(3 process name supports:

Usage	Example	Explanatory
$$	$$	current process
processname	eclipse	process name contains "eclipse"
`**`processname	`**`eclipse	process name ends to "eclipse"
processname`**`	eclipse`**`	process name start with "eclipse"
=processname	=eclipse	process name equals "eclipse"
#PTQL	#State.Name.eq=eclipse	Sigar Process Table Query Language (see https://support.hyperic.com/display/SIGAR/PTQL)

Examples, how to configure your items:

Number loadAverage1min	"Load avg. 1min [%.1f]"	(System) { systeminfo="LoadAverage1Min:5000" }
Number loadAverage5min	"Load avg. 5min [%.1f]"	(System) { systeminfo="LoadAverage5Min:5000" }
Number loadAverage15min "Load avg. 15min [%.1f]"	(System) { systeminfo="LoadAverage15Min:5000" }

Number cpuCompined	"CPU combined [%.1f]"	(System) { systeminfo="CpuCombined:5000" }
Number cpuUser	"CPU user [%.1f]"	(System) { systeminfo="CpuUser:5000" }
Number cpuSystem	"CPU system [%.1f]"	(System) { systeminfo="CpuSystem:5000" }
Number cpuNice	"CPU nice [%.1f]"	(System) { systeminfo="CpuNice:5000" }
Number cpuWait "CPU wait [%.1f]"	(System) { systeminfo="CpuWait:5000" }

Number uptime	"Uptime [%.1f]"	(System) { systeminfo="Uptime:5000" }
String uptimeFormatted	"Update formatted [%s]"	(System) { systeminfo="UptimeFormatted:5000" }

Number MemFree "Mem free [%.1f]"	(System) { systeminfo="MemFree:5000" }
Number MemFreePercent	"Mem free [%.1f%%]"	(System) { systeminfo="MemFreePercent:5000" }
Number MemUsed	"Mem used [%.1f]"	(System) { systeminfo="MemUsed:5000" }
Number MemUsedPercent	"Mem used [%.1f%%]"	(System) { systeminfo="MemUsedPercent:5000" }
Number MemActualFree	"Mem actual free [%.1f]"	(System) { systeminfo="MemActualFree:5000" }
Number MemActualUsed	"Mem actual used [%.1f]"	(System) { systeminfo="MemActualUsed:5000" }
Number MemTotal	"Mem total [%.1f]"	(System) { systeminfo="MemTotal:5000" }

Number SwapFree	"Swap free [%.1f]"	(System) { systeminfo="SwapFree:5000" }
Number SwapTotal	"Swap total [%.1f]"	(System) { systeminfo="SwapTotal:5000" }
Number SwapUsed	"Swap used [%.1f]"	(System) { systeminfo="SwapUsed:5000" }
Number SwapPageIn	"Swap pagein [%.1f]"	(System) { systeminfo="SwapPageIn:5000" }
Number SwapPageOut	"Swap pageout [%.1f]"	(System) { systeminfo="SwapPageOut:5000" }

Number NetTxBytes	"Next tx bytes [%.1f]"	(System) { systeminfo="NetTxBytes:5000:en1" }
Number NetRxBytes	"Next rx bytes [%.1f]"	(System) { systeminfo="NetRxBytes:5000:en1" }

Number DiskReads	"Disk reads [%.1f]"	(System) { systeminfo="DiskReads:5000:/dev/disk1" }
Number DiskWrites	"Disk writes [%.1f]"	(System) { systeminfo="DiskWrites:5000:/dev/disk1" }
Number DiskReadBytes	"Disk read bytes [%.1f]"	(System) { systeminfo="DiskReadBytes:5000:/dev/disk1" }
Number DiskWriteBytes	"Disk write bytes [%.1f]"	(System) { systeminfo="DiskWriteBytes:5000:/dev/disk1" }

Number DirUsage	"Dir usage [%.1f]"	(System) { systeminfo="DirUsage:5000:/Users/foo" }
Number DirFiles	"Dir files [%.1f]"	(System) { systeminfo="DirFiles:5000:/Users/foo" }

Number OpenhabRealMem	"Real mem [%.1f]"	(System) { systeminfo="ProcessRealMem:5000:$$" }
Number OpenhabVirtualMem	"Virtual mem [%.1f]"	(System) { systeminfo="ProcessVirtualMem:5000:$$" }
Number OpenhabCpuPercent	"Cpu percent [%.1f%%]"	(System) { systeminfo="ProcessCpuPercent:5000:$$" }
Number OpenhabCpuSystem	"CPU system [%.1f]"	(System) { systeminfo="ProcessCpuSystem:5000:$$" }
Number OpenhabCpuUser	"CPU user [%.1f]"	(System) { systeminfo="ProcessCpuUser:5000:$$" }
Number OpenhabCpuTotal	"CPU total [%.1f]"	(System) { systeminfo="ProcessCpuTotal:5000:$$" }
Number OpenhabUptime	"Uptime [%d]"	(System) { systeminfo="ProcessUptime:5000:$$" }
String OpenhabUptimeFormatted	"Uptime form. [%s]"	(System) { systeminfo="ProcessUptimeFormatted:5000:$$" }

Number EclipseRealMem1	"Real mem1 [%.1f]"	(System) { systeminfo="<ProcessCpuPercent:10000:eclipse" }
Number EclipseRealMem2	"Real mem2 [%.1f]"	(System) { systeminfo="<ProcessCpuPercent:10000:*eclipse" }
Number EclipseRealMem3	"Real mem3 [%.1f]"	(System)  { systeminfo="<ProcessCpuPercent:10000:eclipse*" }
Number EclipseRealMem4	"Real mem4 [%.1f]"	(System) { systeminfo="<ProcessCpuPercent:10000:=eclipse" }
Number EclipseRealMem5	"Real mem5 [%.1f]"	(System) { systeminfo="<ProcessCpuPercent:10000:#State.Name.eq=eclipse"