Skip to content

Latest commit

 

History

History
221 lines (165 loc) · 12.2 KB

README.md

File metadata and controls

221 lines (165 loc) · 12.2 KB
Raw

VITS Recipe

hf openxlab

In this recipe, we will show how to train VITS using Amphion's infrastructure. VITS is an end-to-end TTS architecture that utilizes a conditional variational autoencoder with adversarial learning.

There are four stages in total:

  1. Data preparation
  2. Features extraction
  3. Training
  4. Inference

NOTE: You need to run every command of this recipe in the Amphion root path:

cd Amphion

1. Data Preparation

Dataset Download

You can use the commonly used TTS dataset to train the TTS model, e.g., LJSpeech, VCTK, Hi-Fi TTS, LibriTTS, etc. We strongly recommend using LJSpeech to train the single-speaker TTS model for the first time. While training the multi-speaker TTS model for the first time, we recommend using Hi-Fi TTS. The process of downloading the dataset has been detailed here.

Configuration

After downloading the dataset, you can set the dataset paths in exp_config.json. Note that you can change the dataset list to use your preferred datasets.

    "dataset": [
        "LJSpeech",
        //"hifitts"
    ],
    "dataset_path": {
        // TODO: Fill in your dataset path
        "LJSpeech": "[LJSpeech dataset path]",
        //"hifitts": "[Hi-Fi TTS dataset path]
    },

2. Features Extraction

Configuration

In exp_config.json, specify the log_dir for saving the checkpoints and logs, and specify the processed_dir for saving processed data. For preprocessing the multi-speaker TTS dataset, set extract_audio and use_spkid to true:

    // TODO: Fill in the output log path. The default value is "Amphion/ckpts/tts"
    "log_dir": "ckpts/tts",
    "preprocess": {
        //"extract_audio": true,
        "use_phone": true,
        // linguistic features
        "extract_phone": true,
        "phone_extractor": "espeak", // "espeak, pypinyin, pypinyin_initials_finals, lexicon (only for language=en-us right now)"
        // TODO: Fill in the output data path. The default value is "Amphion/data"
        "processed_dir": "data",
        "sample_rate": 22050, //target sampling rate
        "valid_file": "valid.json", //validation set
        //"use_spkid": true, //use speaker ID to train multi-speaker TTS model
    },

Run

Run the run.sh as the preprocess stage (set --stage 1):

sh egs/tts/VITS/run.sh --stage 1

NOTE: The CUDA_VISIBLE_DEVICES is set as "0" in default. You can change it when running run.sh by specifying such as --gpu "1".

3. Training

Configuration

We provide the default hyperparameters in the exp_config.json. They can work on a single NVIDIA-24g GPU. You can adjust them based on your GPU machines. For training the multi-speaker TTS model, specify the n_speakers value to be greater (used for new speaker fine-tuning) than or equal to the number of speakers in your dataset(s) and set multi_speaker_training to true.

  "model": {
    //"n_speakers": 10 //Number of speakers in the dataset(s) used. The default value is 0 if not specified.
  },
  "train": {
    "batch_size": 16,
    //"multi_speaker_training": true, 
  }

Train From Scratch

Run the run.sh as the training stage (set --stage 2). Specify an experimental name to run the following command. The tensorboard logs and checkpoints will be saved in Amphion/ckpts/tts/[YourExptName].

sh egs/tts/VITS/run.sh --stage 2 --name [YourExptName]

Train From Existing Source

We support training from existing sources for various purposes. You can resume training the model from a checkpoint or fine-tune a model from another checkpoint.

By setting --resume true, the training will resume from the latest checkpoint from the current [YourExptName] by default. For example, if you want to resume training from the latest checkpoint in Amphion/ckpts/tts/[YourExptName]/checkpoint, run:

sh egs/tts/VITS/run.sh --stage 2 --name [YourExptName] \
    --resume true

You can also choose a specific checkpoint for retraining by --resume_from_ckpt_path argument. For example, if you want to resume training from the checkpoint Amphion/ckpts/tts/[YourExptName]/checkpoint/[SpecificCheckpoint], run:

sh egs/tts/VITS/run.sh --stage 2 --name [YourExptName] \
    --resume true \
    --resume_from_ckpt_path "Amphion/ckpts/tts/[YourExptName]/checkpoint/[SpecificCheckpoint]"

If you want to fine-tune from another checkpoint, just use --resume_type and set it to "finetune". For example, If you want to fine-tune the model from the checkpoint Amphion/ckpts/tts/[AnotherExperiment]/checkpoint/[SpecificCheckpoint], run:

sh egs/tts/VITS/run.sh --stage 2 --name [YourExptName] \
    --resume true \
    --resume_from_ckpt_path "Amphion/ckpts/tts/[YourExptName]/checkpoint/[SpecificCheckpoint]" \
    --resume_type "finetune"

NOTE: The --resume_type is set as "resume" in default. It's not necessary to specify it when resuming training.

The difference between "resume" and "finetune" is that the "finetune" will only load the pretrained model weights from the checkpoint, while the "resume" will load all the training states (including optimizer, scheduler, etc.) from the checkpoint.

Here are some example scenarios to better understand how to use these arguments:

Scenario --resume --resume_from_ckpt_path --resume_type
You want to train from scratch no no no
The machine breaks down during training and you want to resume training from the latest checkpoint true no no
You find the latest model is overfitting and you want to re-train from the checkpoint before true SpecificCheckpoint Path no
You want to fine-tune a model from another checkpoint true SpecificCheckpoint Path "finetune"

NOTE: The CUDA_VISIBLE_DEVICES is set as "0" in default. You can change it when running run.sh by specifying such as --gpu "0,1,2,3".

4. Inference

Pre-trained Model Download

We released a pre-trained Amphion VITS model trained on LJSpeech. So you can download the pre-trained model here and generate speech according to the following inference instruction.

Configuration

For inference, you need to specify the following configurations when running run.sh:

Parameters Description Example
--infer_expt_dir The experimental directory which contains checkpoint Amphion/ckpts/tts/[YourExptName]
--infer_output_dir The output directory to save inferred audios. Amphion/ckpts/tts/[YourExptName]/result
--infer_mode The inference mode, e.g., "single", "batch". "single" to generate a clip of speech, "batch" to generate a batch of speech at a time.
--infer_dataset The dataset used for inference. For LJSpeech dataset, the inference dataset would be LJSpeech.
For Hi-Fi TTS dataset, the inference dataset would be hifitts.
--infer_testing_set The subset of the inference dataset used for inference, e.g., train, test, golden_test For LJSpeech dataset, the testing set would be  "test" split from LJSpeech at the feature extraction, or "golden_test" cherry-picked from the test set as template testing set.
For Hi-Fi TTS dataset, the testing set would be "test" split from Hi-Fi TTS during the feature extraction process.
--infer_text The text to be synthesized. "This is a clip of generated speech with the given text from a TTS model."
--infer_speaker_name The target speaker's voice is to be synthesized.
(Note: only applicable to multi-speaker TTS model)		 For Hi-Fi TTS dataset, the list of available speakers includes: "hifitts_11614", "hifitts_11697", "hifitts_12787", "hifitts_6097", "hifitts_6670", "hifitts_6671", "hifitts_8051", "hifitts_9017", "hifitts_9136", "hifitts_92".
You may find the list of available speakers from spk2id.json file generated in log_dir/[YourExptName] that you have specified in exp_config.json.

Run

Single text inference:

For the single-speaker TTS model, if you want to generate a single clip of speech from a given text, just run:

sh egs/tts/VITS/run.sh --stage 3 --gpu "0" \
    --infer_expt_dir Amphion/ckpts/tts/[YourExptName] \
    --infer_output_dir Amphion/ckpts/tts/[YourExptName]/result \
    --infer_mode "single" \
    --infer_text "This is a clip of generated speech with the given text from a TTS model."

For the multi-speaker TTS model, in addition to the above-mentioned arguments, you need to add infer_speaker_name argument, and run:

sh egs/tts/VITS/run.sh --stage 3 --gpu "0" \
    --infer_expt_dir Amphion/ckpts/tts/[YourExptName] \
    --infer_output_dir Amphion/ckpts/tts/[YourExptName]/result \
    --infer_mode "single" \
    --infer_text "This is a clip of generated speech with the given text from a TTS model." \
    --infer_speaker_name "hifitts_92"

Batch inference:

For the single-speaker TTS model, if you want to generate speech of all testing sets split from LJSpeech, just run:

sh egs/tts/VITS/run.sh --stage 3 --gpu "0" \
    --infer_expt_dir Amphion/ckpts/tts/[YourExptName] \
    --infer_output_dir Amphion/ckpts/tts/[YourExptName]/result \
    --infer_mode "batch" \
    --infer_dataset "LJSpeech" \
    --infer_testing_set "test"

For the multi-speaker TTS model, if you want to generate speech of all testing sets split from Hi-Fi TTS, the same procedure follows from above, with LJSpeech replaced by hifitts.

sh egs/tts/VITS/run.sh --stage 3 --gpu "0" \
    --infer_expt_dir Amphion/ckpts/tts/[YourExptName] \
    --infer_output_dir Amphion/ckpts/tts/[YourExptName]/result \
    --infer_mode "batch" \
    --infer_dataset "hifitts" \
    --infer_testing_set "test"

We released a pre-trained Amphion VITS model trained on LJSpeech. So, you can download the pre-trained model here and generate speech following the above inference instructions. Meanwhile, the pre-trained multi-speaker VITS model trained on Hi-Fi TTS will be released soon. Stay tuned.

@inproceedings{kim2021conditional,
  title={Conditional variational autoencoder with adversarial learning for end-to-end text-to-speech},
  author={Kim, Jaehyeon and Kong, Jungil and Son, Juhee},
  booktitle={International Conference on Machine Learning},
  pages={5530--5540},
  year={2021},
}