ChangeLog

This file contain the log of changes for the main development branch (trunk).
More detailed information about incremental changes can be found in the
history management of subversion.

2019-xx-yy releases/3.12.13
        - fixed Pardiso settings when using Pardiso from Pardiso project
          website (by Olaf Schenk): the new settings should provide much
          better performance; the default for option pardiso_order changed
          from five to metis

2018-11-17 releases/3.12.12
        - allow for --without-matlab-home to disable check for Matlab [r2748]
        - add dppsv to v8-ifort [r2746]
        - disable error in LibraryHandler.c if snprintf detection failed [r2751]

2018-09-16 releases/3.12.11
        - fill Mumps struct with zeros when allocating in Mumps interface [r2724]
        - minor fix in build-system of ThirdParty/ASL

2018-06-02 releases/3.12.10
        - fixed setting for parallel solve when using MKL Pardiso
          (by t1393988511) [r2711]: parallel solve was disabled (which
          is not the default); note, that the setting for parallel
          factorization was not affected
        - fixed invalid read in AMPL interface for problems without
          objective function [r2715, #305]
        - updated ThirdParty/ASL to retrieve updated ASL (20180528) [#305]
        - name JIpopt library libjipopt.dylib on Mac OS X [r2718, #275]

2018-01-15 releases/3.12.9
        - fixed memory leak in MA86 interface (by mhahn) [r2700,#283]
        - fixed handling of time limit when reoptimizing: CPU time spend
          was accumulated when reoptimizing, while it should have been
          reset for each solve (by paul-scott) [r2702,r2703]
        - fixed sign in Jacobian finite-difference approximation when point
          was close to variable upper bounds (by Enrico Bertolazzi) [r2704]

2017-06-12 releases/3.12.8
        - add define for FORTRAN_INTEGER_TYPE to config_ipopt_default.h
        - IpoptApplication::RethrowNonIpoptException() now returns whether
          non-ipopt exceptions were rethrown before the method was called.

2017-02-25 releases/3.12.7
        - removed compiler flag -pedantic-errors to avoid problems with some
          configure tests when using recent GCC versions
        - fixed rare bug in handling variable/constraint names in AmplTNLP
          (by G. Hackebeil) [r2673]
        - the get.Mumps script in ThirdParty/Mumps now renames libseq/mpi.h
          to libseq/mumps_mpi.h to avoid conflicts when building in a MPI
          environment (by T. Ralphs); note that if updating an existing
          checkout/download of Ipopt, you may have to rerun get.Mumps

2016-07-20 releases/3.12.6
        - better support for custom algorithm development [r2659]
          (by Gabriel Hackebeil) https://github.com/coin-or/Ipopt/pull/5:
          "Reorganization of the AlgorithmBuilder class to allow easier
          customization of the Ipopt algorithm. In particular, we wanted to
          make use of the code that creates the SymLinearSolver object to
          implement our own SymLinearSolver without copy-pasting everything
          in AlgorithmBuilder.
          AlgorithmBuilder::BuildBasicAlgorithm now consists of 8 method calls
          that build the core components passed into the arguments of the
          IpoptAlgorithm class. These calls are ordered based on any dependencies
          they might have. In addition, all code for creating the PDSystemSolver,
          AugSystemSolver, and SymLinearSolver has been moved into separate factory
          methods.
          Also, included is a change to install a few more header files with Ipopt.
          Some of these are required to subclass AlgorithmBuilder, and the others
          are simply some matrix types that we require."
        - extend build system to work without Fortran compiler [r2660,r2661]
          If no Fortran compiler is available (F77=unavailable), then
          the build system checks for functions in Blas, Lapack, and
          Pardiso via C linkage. This seems to work when using the Intel MKL,
          thus allowing to build Ipopt with C/C++ compilers and MKL only.
          The linear solver loader and the CuteR interface are disabled when
          no Fortran compiler is available. A user may have to adjust the
          definition of F77_FUNC in Ipopt/src/Common/IpoptConfig.h.

2016-04-30 releases/3.12.5
        - changed fptr from long to void*: the Fortran side needs to
          make sure that it uses a big enough integer type to store a
          C pointer, thus void* can be used on the C side [r2599]
        - added additional second-order-correction method, which can be
          selected by setting the new option soc_method to 1 (by Wei Wan)
          [r2606, r2607]
        - added parameter allow_clobber with default value false to
          IpoptApplication::Initialize and OptionsList::ReadFromStream

2015-08-09 releases/3.12.4
        - option to use regularized Hessian when doing a curvature test
          without inertia information (neg_curv_test_tol > 0), new
          option neg_curv_test_reg to switch back to original behavior
          (by N.-Y. Chiang and V. Zavala Tejeda) [r2579]
        - sIpopt: Added access to sensitivity directional derivative
          vector (ds/dp*(p-p0) Eq. 14 sIpopt implementation paper). Also,
          added an option to compute the sensitivity matrix and provide
          access to it. Finally, added an example that shows how to
          access the new information. (by R. Lopez-Negrete)
        - use workaround for failing check for random number generator
          with any gcc 4.8.x (x >= 2)

2015-04-15 releases/3.12.3 and releases/3.11.11
        - fixed bug in MA97 interface that lead to conversion issues
          (by J. Hogg) [r2566, #260]

2015-04-04 releases/3.12.2
        - revised integration of doxygen documentation into build system
          (by T. Ralphs)

2015-02-13 releases/3.12.1
        - fixes to build system for dependency linking and library versioning
        - Ipopt will now report an NLP with inconsistent variable bounds
          or inconsistent constraints sides as infeasible instead of
          throwing an invalid TNLP exception (by T. Kelman) [r2548]

2015-01-23 releases/3.12.0
        - Library dependencies are now recorded in shared library builds,
          which is intended to simplify linking against the Ipopt library.
          However, the pkg-config and ipopt_addlibs files do not reflect
          this change yet (it is rather experimental, imho). To restore
          the previous behavior, use --disable-dependency-linking as
          configure option. In case of problems, contact Ted Ralphs.
        - If linking against Intel MKL for Blas/lapack, use of Pardiso
          from MKL is now automatically enabled. Note, that this will
          change the default solver on Ipopt builds without any of the
          linear solvers MA27, MA57, MA97, and MA86 (these take preference
          over Pardiso). [#216]
        - dropped support for old HSL sources (<2013; ThirdParty/HSLold)
        - updated ASL sources, now downloaded from AMPL-MP (github)
        - some internal changes to data structures (improved use of compound
          component spaces) and addition of IpLapackDppsv (by Gabe Hackebeil)

2015-01-18 releases/3.11.10
        - fix a memory allocation in Java interface in cases where jint
          has a different size than int [r2513]
        - the buildsystem now tries the Accelerate framework instead of
          vecLib for finding Blas/Lapack on MacOS X 

2014-08-16 releases/3.11.9
        - fix compilation issue of Java interface on systems where Index
          and jint have different size [r2498, #241]
        - work around failing check for random number generator with gcc
          4.8.3 [r2495, r2496]
        - readded IpTaggedObject.cpp to list of sources to compile in
          MSVS v8-ifort project file [r2492]
        - work around missing support for thread-local storage with gcc < 4.5
          on MacOS X [r2491, #243]
        - fix call to MKL Pardiso init function [r2489]
        - speed up Triplet to CSR converter [r2487, #234]
        - fixed a bug in equilibration scaling where average values were
          computed incorrectly (by V. Zverovich) [r2483]

2014-04-08 releases/3.11.8
        - fixed a bug, introduced with Ipopt 3.11.0, where the tag in the
          Ipopt's caching mechanism was not unique over time, which lead
          ot failures of Ipopt that were difficult to debug or recognize
          (e.g., Ipopt may have stopped with an restoration failure for
          instances that solved fine with Ipopt 3.10) [r2472, r2473]
          I'm very thankful to Gabriel Hackebeil and Kurt Majewski for
          their debugging effort on this issue.
        - building Mumps with pthreads is now disabled by default [#229]
        - fixed setting of LD on Windows (now set to link only iff using
          MS/Intel compilers) [#230]
        - fixed download link for Gnumex [r2471]
        - for some messages about too-few-degrees-of-freedom and restoration
          failure, the message level changed from error to strong-warning
          [r2460, r2469]
        - revised calls to MPI_Init and MPI_Finalize in Mumps interface [r2467]
          (MPI_Init is now called only if function MPI_Initialized is available
          and MPI has not been initialized already; MPI_Finalize is only called
          if Ipopt also called MPI_Init; ...)

2013-12-18 releases/3.11.7
        - adapted PARDISO parameters when using MKL PARDISO to be close
          to using Basel PARDISO
        - added options pardiso_max_iterative_refinement_steps and
          pardiso_order; the former defaults to 1 in case of MKL PARDISO,
          which may help on instances that otherwise fail due to numerical issues
        - removed duplicate code in IpQualityFunctionMuOracle.cpp [#225, r2445]
        - fixed bug in triplet to csr converter [#226, r2446]
        - minor changes in buildsystem

2013-11-16 releases/3.11.6
        - updates to Matlab Interface build system (by T. Kelman)
        - fix to updates of R Interface [r2416, #223]
        - fixed SHAREDLIBEXT in v8-ifort's config.h [r2426, #224]
        - minor fixes to the buildsystem

2013-10-26 releases/3.11.5
        - added method IpoptApplication::RethrowNonIpoptException() to enable
          rethrowing of non-ipopt and non-bad_alloc exceptions catched in
          the *Optimize() and Initialization() methods; default is still to
          return with NonIpopt_Exception_Thrown status
        - minor fixes to the buildsystem [#215, #222]

2013-09-12 releases/3.11.4
        - hopefully fixed non-working linear solver loader in DLLs build with
          MSVS/v8-ifort project files [r2365]
        - allow MC19 to be loaded via linear solver loader (by J. Currie) [r2366]
        - fixed new point flag when running dependendency detector [r2368]
        - experimental: adapt Pardiso interface to work with MKL Pardiso
          (by J. Currie, T. Kelman) [r2369, #216]:
          - in a few tests it has been found that Pardiso from Intel MKL nowadays
            seems to work fine with Ipopt
          - to use Intel MKL with Ipopt 3.11, one has to specify the MKL libs via
            --with-pardiso and add -DHAVE_PARDISO_MKL -DHAVE_PARDISO_PARALLEL
            to the compiler flags
          - note that this is still an experimental feature (and thus not enabled
            by default)
        - updated Ipopt/R interface to version 0.8.4 [r2373]
          - additional variables have been included in the object returned from ipoptr:
            z_L : final values for the lower bound multipliers
            z_U : final values for the upper bound multipliers
            constraints : final values for the constraints
            lambda : final values for the Lagrange multipliers
          - removed ipoptr_environment as argument in ipoptr (see also r2372)
        - fixed bug in penalty term for centrality in quality function (not used by
          default) [#219, r2374]
        - minor bugfixes in AMPL interface, debug print statements, and compound matrix
          (by G. Hackebeil) [#218, r2371, r2377, r2378, r2379]
        - download scripts for ASL, Blas, and Lapack now first try to download tarball
          copies from the COIN-OR server

2013-08-08 releases/3.11.3
        - get.* scripts for ThirdParty/{ASL,Blas,Lapack} now work around broken
          ftp access to www.netlib.org.

2013-07-01 releases/3.11.2
        - changed default for option option_file_name to ipopt.opt; specifying an
          empty string for this option now disables reading of an option file [r2339]
        - missing initial values are now set to 0.0, projected onto variable bounds,
          in AMPL interface [r2340, #205]
        - fixed missing variable initialization in MA97 interface [r2341, #206]

2013-06-14 releases/3.11.1
        - the setup for the v8-ifort MSVS project changed to use dynamic runtime
          DLLs instead of static linking, which caused crashes in debug mode
          (by M. Roelofs) [r2301]
        - fixed memory leaks in Java Interface (by javier) [#200, r2312]
        - updates and fixes to MA77 and MA87 interfaces, adding support of
          HSL 2013 codes (by J. Hogg);
          HSL 2012 still supported when compiled with Ipopt, but the linear solver
          loader to dynamically load a HSL library at runtime now assumes HSL 2013
        - added option ma97_solve_blas3 (by J. Hogg) [r2329]
        - changed default for option ma27_meminc_factor from 10.0 to 2.0 [r2330]
        - fixed bug in ipopt_auxdata of MATLAB Interface related to iterfunc [r2325]

2013-05-07 releases/3.11.0
        - update and extension of Ipopt documentation
        - updated build of doxygen documentation to comply with other COIN-OR projects
        - localized global variables in TaggedObject and RegisteredOption,
          so that Ipopt should now be threadsafe as long as Ipopt objects
          (esp. SmartPtr's) are not shared between threads and a threadsafe
          linear solver is used (e.g., MA27) [#167]
        - no more need for whitespace character at end of options file
        - added options print_frequency_iter and print_frequency_time to regulate
          which iteration summary lines should be printed [#161]
        - function evaluation timings are now available in OrigIpoptNLP [#86]
        - some fixes to uncommon issues with the Ipopt SmartPtr [#162]

        - new build system for Harwell codes (ThirdParty/HSL), which requires
          the coin-hsl archives from http://www.hsl.rl.ac.uk/ipopt/;
          previously downloaded HSL sources can still be used by placing them
          into ThirdParty/HSLold, but this option may be removed in a future
          Ipopt version
        - new interfaces for Harwell codes HSL_MA77, HSL_MA86, and HSL_MA97;
          see http://www.hsl.rl.ac.uk/ipopt/ about help on when to use which solver;
          especially MA57 and HSL_MA97 should be considered as replacement for MA27;
          however, MA27 is still the default for now
        - changed default of ma57_automatic_scaling to no (faster in general,
          but for higher reliability, you may want to set this option to yes)

        - major improvements for building the MATLAB interface (see documentation)
        - MATLAB interface now returns number of function evaluations, too
        - the MA57 interface can now be used with the MA57 library that comes with
          MATLAB (configure option --enable-matlab-ma57; cannot use Metis)
        - auxdata is now handled by a wrapper function ipopt_auxdata.m instead
          of internally within the mex code (replace Matlab call to ipopt with
          ipopt_auxdata if using auxiliary data in any callbacks) [r2282]
        - exposed more intermediate Ipopt information to iterfunc callback [r2283]
        
        - fixes to JIpopt buildsystem (now may work on windows and uses libtool)
        - JIpopt now reads options file ipopt.opt by default, if present
        - removed predefined KEY_ strings in JIpopt
        - renamed API functions that retrieve solution values in JIpopt
        
        - simplified installation of R interface

2013-05-05 releases/3.10.4
        - fixed sign of dual values in AMPL solution again (with help of Gabe)
          [r2169, r2170, r2184, #183]
        - fixed bugs with reoptimizing a TNLP with all variables fixed [r2172, r2173, #179]
        - fixed more issues with sparse data structures and non-double numbers
          in Matlab interface (by T. Kelman) [r2191]
        - added missing final int for Ipopt return code Maximum_CpuTime_Exceeded
          in Java interface [r2216]
        - fixed bug when trying to warmstart Ipopt in Java interface [r2253]
        - fixed wrong use of SmartPtr's in Java interface [r2255, r2263]
        - fixed bug in returning final solution in Java interface [r2258]
        - included patch in ThirdParty/Mumps to work around bugs in Mumps
          matrix ordering routines AMF and QAMD (now give preference to AMD and METIS)

2012-11-19 releases/3.10.3
        - minor fixes in MA86 interface (by Jonathan Hogg) [r2069, r2086]
        - fix in IpTripletToCSRConverter for CSR forms with
          extra entries (by Jonathan Hogg) [r2087]
        - workaround problems with MacOSX-Lion's blas library
          (by Frederic Hetch) [r2102, #181]
        - the C interface now catches also Ipopt exceptions thrown
          within the OptimizeTNLP call and returns Ipopt::Unrecoverable_Exception
          as status [r2094, #144]
        - fixed segmentation fault in adaptive barrier parameter update rule
          when using the mehrotra option on unconstrained problems [r2114, #114]
        - fixed segmentation fault in case no iterate is available in case of
          catastrophic failure in restoration phase [r2115]
        - fixed default for mumps_dep_tol to work with current Mumps versions [r2116]
        - fixed sign of dual values in AMPL solution [r2123, #183]
        - fixed issue with sparse gradients in Matlab interface
          (by T. Kelman) [r2133, #187]
        - sIPOPT (by H. Pirnay):
          - starting values in C++ version of parametric example now
            match AMPL version [r2098]
          - numerical values in parametric example now match publication [r2099]
          - added options n_sens_steps and sens_boundcheck as AMPL options [r2099]
          - any non-zero suffix value is now accepted for sens_init_constr [r2100]
          - fix typo in AMPL interface (by Weifeng Chen) [r2110]
          - fix bug when compiling without AMPL interface [r2113]
        - build system:
          - updated instruction on using nowadays HSL sources (by T. Kelman)
          - fixed issue with libdir being <prefix>/lib64
        - other minor fixes

2012-02-12 releases/3.10.2
        - updates to HSL interface (by Jonathan Hogg):
          - MC68 can now be loaded dynamically, too
          - MA86 exploits built-in scaling
          - MA86 can choose best ordering from AMD and Metis
          - fix for return code of MA86 for singular matrices
        - corrected computation of Upsilon (norm of step SQUARED)
        - updates to MSVS v8-ifort project files and addition of vc10
          project files (using vc8-generated IpoptFSS.dll) (by Marcel Roelofs)
        - minor bugfixes, include updates in BuildTools

2011-09-20 releases/3.10.1
        - include updates in BuildTools, including new ThirdParty/Metis
           (fix for URL to download Metis 4.0.3 release)
        - linear solver loader prints error code when failing to load
          library under Windows
        - message on failure when reallocating memory in Mumps now includes
          size of memory that was tried to be allocated
        - added missing include of cstdio/stdio.h to IpJournalist.hpp
        - minor fixes to build system

2011-06-20 releases/3.10.0
        - move to new COIN-OR configuration and installation convention
        - primal infeasibility output is now true infeasibility in original
          problem formulation

2011-04-07 releases/3.9.3
        - include updates in BuildTools, including new ThirdParty/Metis
           (required to work with current metis release)

2010-12-22 releases/3.9.2
        - converted from Common Public License to Eclipse Public License
        - some bugfixes from BuildTools

2010-11-26 releases/3.9.1
        - improved Hessian update for restoration phase
        - added intermediate callback feature to C and Fortran interface

2010-11-05 releases/3.9.0
        - switching to new BuildTools system
        - added R interface (contributed by Jelmer Ypma)
        - updates in AsNMPC (by Hans Pirnay)

2010-06-29 releases/3.8.3
        - restated SolveStatistics::TotalCPUTime method for backward
          compatibility

2010-06-16 releases/3.8.2
        - uses MUMPS version 4.9 and Lapack version 3.2.1
        - added AsNMPC contribution made by Hans Pirnay
        - enhanced MA57 options
        - several bug fixes and minor additions

2009-10-30 releases/3.8.1
        - Bugfix in NLP function evaluation timing measurement.  The
          time for the objective function gradient had been forgotten.

2009-10-29 releases/3.8.0
        - Added MSVC solution with Intel Fortran compiler to generate DLLs
          (contributed by Marcel Roelofs).  To make this work, a lot of methods
          in exported headers have been made virtual
        - changed default convergence tolerance in restoration phase (now same
          as regular tolerance)
        - output is flushed after each iteration

2009-10-06 releases/3.7.1
        - bugfix for square problems
        - correct timinig information (obj gradient was forgotten)
        - flush output buffer after each iteration
        - first code for iterative WSMP version (experimental and undocumented)

2009-07-16 releases/3.7.0
        - a number of fixes (including those from 2009 COIN Bug Squashing
          Party)
        - changes in some exposed header files to provide access to internal
          data structures for specific applications

2009-05-01 releases/3.6.1
        - minor corrections in tutorial files

2009-04-29 releases/3.6.0
        - new Matlab interface
        - added new option to limit cpu time (max_cpu_time)
        - added ThirdParty directory for Metis to be used with MUMPS or MA57
        - updated CUTEr Makefile to make it work with CUTEr2
        - added files for a tutorial (including coding exercise)

2009-01-13 releases/3.5.5
        - minor fixes regarding compilation
        - undocumented version of inexact method

2008-09-29 releases/3.5.4
        - changed to MUMPS version 4.8.3 in externals (Mumps developers
          seem to have removed 4.8.1).

2008-09-19 releases/3.5.3
        - changed back to MUMPS version 4.8.1 since there seem to be issues
          on Windows

2008-09-18 releases/3.5.2
        - changed to latest version of MUMPS (4.8.2)
        - some bugfixes (linear algebra objects, automatic problem scaling)
        - made sure the subversion revision number is correct in all files
        - allowed general additional data and cq in IpData and IpCq

2008-08-26 releases/3.5.1
        - changed to latest version of MUMPS (4.8.1)

2008-08-25 releases/3.5.0
        - added ComputeRowAMax and ComputeColAMax methods to Matrix base class
        - changed externals for MUMPS to stable/1.1
        - call finalize solution in more failure cases
          (this means that AMPL writes .sol file in more situations)
        - added IpTNLPReducer as simple way to exclude constraints from problem
        - several fixes, also from COIN Bug Squashing Party 2008

2008-07-18 releases/3.4.2
        - some bug fixes
        - added wallclock time routine
        - penalty function version does not longer crash if it
          wants to go to restoration phase (not that this really helps
          converence though)

2008-05-30 releases/3.4.1
        - some bug fixes
        - deleted v9 MSVC files again (since v8 works fine for v9)
        - print Ipopt version in default print level
        - added option that allows to change name of options file
          (option_file_name)

2008-04-25 releases/3.4.0
        - added support to dynamically load HSL or Pardiso:
          If Ipopt has been compiled without some HSL or Pardiso solver,
          it can now load those solvers from a shared library at runtime
          without recompilation.  This will make ditribution of binaries
          easier.  Does not work on all platforms yet.
        - several bugfixes
        - ensured compilation of MSVS project files (v8 and v9)
        - new special return code for square problems
          (Feasible_Point_Found returned if dual inf not small)
        - new initialization option for bound multipliers
          (see option bound_mult_init_method)
        - added simple penalty function line search option
          (line_search_method=penalty) - not guaranteed to converge, see
          Ipopt implementation paper (in MathProg)
        - some very basic method to approximate constraint Jacobian by
          finite differences (not efficient, but will hopefully be extended)

2008-02-28 releases/3.3.5
        - corrected links for Ipopt mailing list
        - added missing Makefile.in for Matlab interface
        - the addlibs* files are now installed in share/doc/coin/Ipopt
          instead of lib
        - updates in Matlab interface
        - bugfix for ticket #56

2007-12-27 releases/3.3.4
        - headers are now installed in include/coin
            (no longer in include/ipopt)
        - default for dual_inf_tol is now 1 (instead of 1e-4)
        - In matlab interface, here the text from Peter Carbonetto:
          There have been several significant changes made to the MATLAB interface since the last release. The most important two changes are: 1) Following the "warm start" feature of IPOPT, you may pass in initial estimates for the Lagrange multipliers. 2) Callback routines for computing the objective, gradient (etc.) are now specified using function handles instead of strings. (Thanks to Marcus Brubaker at the University of Toronto for the initial suggestion.) 

2007-09-25 releases/3.3.3
        - minor changes, bug fixes

2007-06-20 releases/3.3.1
        synchronized with all changes in trunk; probably more than to be
        remembered.  In the following a few:
        - support for Mumps linear solver (contributed by Damian Hocking)
        - --print-options flag for ipopt ASL solver executable to see all
          Ipopt options (available through ipopt.opt file)
        - added Matlab interface (contributed by Peter Carbonetto)
        - added support for f2c compiler to compiler Fortran code with
          MSVC++ compiler
        - new MSVisualStudio support (now within MSVisualStudio project
          and also with f2c)
        - a number of small changes/bug fixes/improvements
        - small change in interface (e.g., FinalizeSolution method)

2007-04-24 releases/3.2.4
        - updated download script for Blas to fit netlib's
          recent changes
        - using a more recent version of BuildTools

2006-11-29 release/3.2.3
        - updated download script for Lapack to fit to netlib's
          recent changes

2006-10-11 stable/3.2 r795
        - Bugfix in L-BFGS update
        - fix in configure with detection of sizeof(int *) on Cygwin

2006-07-14 - version 3.2.1 - dev release number 764
        - Bugfix in least square multiplier estimate.
          It mainly showed up in LBFGS with restoration phase as seg fault

2006-07-07 - version 3.2.0 - dev 757
        - changed installation procedure and directory structure to
          conform with new COIN-OR convention

2006-04-08 - version 3.1.0 - dev release number 714
        Several bug-fixes, improvements and additions. In particular:
        - new quasi-Newton approximation using L-BFGS
        - interfaces to linear solver MA57, WSMP, Pardiso
          (MUMPS and TAUCS not yet completed)
        - derivative checker
        - unit test
        - configure supports compilation under Cygwin with native
          Windows compilers
        - ScalableExample
        - user call-back method in TNLP

2005-12-04 - version 3.0.1 - fixes independent of dev
        (already taken care of there)
        Several corrections to Windows files
        Fix termination if number of iterations is exceeded in restoration phase
2005-08-26 - version 3.0.0 - dev release number 510
        First official release of the new C++ implementation of Ipopt.