Skip to content
This repository has been archived by the owner on Sep 30, 2024. It is now read-only.

LCD Shields

notro edited this page Feb 11, 2014 · 36 revisions

RPi-Display - 2.8" Touch-Display (320x240)

rpi-display tek-berry
Product page: http://www.watterott.com/en/RPi-Display
Github: https://github.com/watterott/RPi-Display
Matching case: http://www.watterott.com/index.php?page=product&info=3615
Custom Raspian image: http://tronnes.org/fbtft/download.html (fbtft-RPi-Display)

2.8" TFT + Touch Shield Board (320x240)

tft28
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=65566
Custom Raspian image: http://tronnes.org/fbtft/download.html (fbtft-hy28b)

2.8" TFT + Touch + RTC Shield Board (320x240)

tft28
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=69015
Custom Raspian image: http://tronnes.org/fbtft/download.html (fbtft-hy28b)

3.5" TFT shield with push buttons (480x320)

tft35
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=67004
Custom Raspian image: http://tronnes.org/fbtft/download.html (fbtft-tinylcd35)

PiTFT Mini Kit - 320x240 2.8" TFT+Touchscreen

pitft
Product page: http://www.adafruit.com/products/1601
Howto: http://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi
Touch is not supported by the FBTFT prebuilt kernel. Adafruit provides a custom kernel.

1.8" TFT LCD Shield board

tft18
Product page: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=59&t=43286

PiOLED

Product page: http://electronics.ilsoft.co.uk/PiShield.aspx

This shield has a joyswitch, and it can be used as a mouse or as a "keyboard". Since the shield doesn't have pullup resistors, we use the internal ones.

Mouse

sudo modprobe gpio_mouse
sudo modprobe gpio_mouse_device pullup polarity=1 up=23 down=17 left=18 right=27 bleft=22
FRAMEBUFFER=/dev/fb1 startx

Ref: gpio_mouse_device

Keyboard, arrow keys and Enter key

sudo modprobe gpio_keys
sudo modprobe gpio_keys_device pullup active_low keys=23:103,17:108,18:105,27:106,22:28

Ref: gpio_keys_device

This keyboard can be used with AdvanceMAME. Set in advance.rc

device_keyboard raw

Ref: MAME

Add to /etc/modules to make it permanent.

On Rev. 1 boards use GPIO 21 instead of 27.

RPi-ShieldBridge

RPi-ShieldBridge

Product page: http://www.watterott.com/en/RPi-ShieldBridge
Blog post: http://lallafa.de/blog/2013/07/watterotts-new-rpi-shieldbridge/

Raspberry Pi to Arduino Shield Bridge
Connect your Arduino Shields with your Raspberry Pi or use our popular MI0283QT- Adapter (2,8“ Color LCD + Touch).
OnBoard you find an ATmega328 with preprogrammed Arduino bootloader.

LCD-PI32, 3.2" TFT LCD with touchscreen (320x240)

lcd-pi32
Product page: http://www.hwlevel.com/PI32/index.html
Forum thread: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=93&t=56131
This display is not supported by FBTFT. They provide a custom kernel.

Guzunty LCD Driver Daughterboard

guzunty
Product page: https://github.com/Guzunty/Pi/wiki/LCD-Driver-Daughterboard

ITEAD Raspberry PI LCD Adapter Kit

itead
Product page: http://imall.iteadstudio.com/im130425001.html
Forum post: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=64&t=43702

It's not possible to use the touch panel as a Linux mouse with this adapter. The Touch IC is not wired to the Raspberry Pi SPI bus.

piwik

Clone this wiki locally