diff --git a/LICENSE b/LICENSE index 42617621e33a19..7920cbbaabcbfc 100644 --- a/LICENSE +++ b/LICENSE @@ -237,38 +237,6 @@ The externally maintained libraries used by Node.js are: THE SOFTWARE. """ -- python-gflags is located at tools/gflags. Its license follows: - """ - # Copyright (c) 2006, Google Inc. - # All rights reserved. - # - # Redistribution and use in source and binary forms, with or without - # modification, are permitted provided that the following conditions are - # met: - # - # * Redistributions of source code must retain the above copyright - # notice, this list of conditions and the following disclaimer. - # * Redistributions in binary form must reproduce the above - # copyright notice, this list of conditions and the following disclaimer - # in the documentation and/or other materials provided with the - # distribution. - # * Neither the name of Google Inc. nor the names of its - # contributors may be used to endorse or promote products derived from - # this software without specific prior written permission. - # - # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - """ - - tools/cpplint.py is a C++ linter. Its license follows: """ # Copyright (c) 2009 Google Inc. All rights reserved. diff --git a/tools/gflags/AUTHORS b/tools/gflags/AUTHORS deleted file mode 100644 index 23542ec6c80687..00000000000000 --- a/tools/gflags/AUTHORS +++ /dev/null @@ -1 +0,0 @@ -google-gflags@googlegroups.com diff --git a/tools/gflags/COPYING b/tools/gflags/COPYING deleted file mode 100644 index d15b0c24134de8..00000000000000 --- a/tools/gflags/COPYING +++ /dev/null @@ -1,28 +0,0 @@ -Copyright (c) 2006, Google Inc. -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - - * Redistributions of source code must retain the above copyright -notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above -copyright notice, this list of conditions and the following disclaimer -in the documentation and/or other materials provided with the -distribution. - * Neither the name of Google Inc. nor the names of its -contributors may be used to endorse or promote products derived from -this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/tools/gflags/ChangeLog b/tools/gflags/ChangeLog deleted file mode 100644 index 87732a2b975fb4..00000000000000 --- a/tools/gflags/ChangeLog +++ /dev/null @@ -1,62 +0,0 @@ -Wed Jan 18 13:57:39 2012 Google Inc. - - * python-gflags: version 2.0 - * No changes from version 1.8. - -Wed Jan 18 11:54:03 2012 Google Inc. - - * python-gflags: version 1.8 - * Don't raise DuplicateFlag when re-importing a module (mmcdonald) - * Changed the 'official' python-gflags email in setup.py/etc - * Changed copyright text to reflect Google's relinquished ownership - -Tue Dec 20 17:10:41 2011 Google Inc. - - * python-gflags: version 1.7 - * Prepare gflags for python 3.x, keeping 2.4 compatibility (twouters) - * If output is a tty, use terminal's width to wrap help-text (wiesmann) - * PORTING: Fix ImportError for non-Unix platforms (kdeus) - * PORTING: Run correctly when termios isn't available (shines) - * Add unicode support to flags (csilvers) - -Fri Jul 29 12:24:08 2011 Google Inc. - - * python-gflags: version 1.6 - * Document FlagValues.UseGnuGetOpt (garymm) - * replace fchmod with chmod to work on python 2.4 (mshields) - * Fix bug in flag decl reporting for dup flags (craigcitro) - * Add multi_float, and tests for multi_float/int (simonf) - * Make flagfiles expand in place, to follow docs (dmlynch) - * Raise exception if --flagfile can't be read (tlim) - -Wed Jan 26 13:50:46 2011 Google Inc. - - * python-gflags: version 1.5.1 - * Fix manifest and setup.py to include new files - -Mon Jan 24 16:58:10 2011 Google Inc. - - * python-gflags: version 1.5 - * Add support for flag validators (olexiy) - * Better reporting on UnrecognizedFlagError (sorenj) - * Cache ArgumentParser, to save space (tmarek) - -Wed Oct 13 17:40:12 2010 Google Inc. - - * python-gflags: version 1.4 - * Unregister per-command flags after running the command (dnr) - * Allow key-flags to work with special flags (salcianu) - * Allow printing flags of a specific module (mikecurtis) - * BUGFIX: Fix an error message for float flags (olexiy) - * BUGFIX: Can now import while defining flags (salcianu) - * BUGFIX: Fix flagfile parsing in python (chronos) - * DOC: Better explain the format of --helpxml output (salcianu) - * DOC: Better error message on parse failure (tstromberg) - * Better test coverage under python 2.2 (mshields) - * Added a Makefile for building the packages. - -Mon Jan 4 18:46:29 2010 Tim 'mithro' Ansell - - * python-gflags: version 1.3 - * Fork from the C++ package (google-gflags 1.3) - * Add debian packaging diff --git a/tools/gflags/MANIFEST.in b/tools/gflags/MANIFEST.in deleted file mode 100644 index 17851bfa77e9fd..00000000000000 --- a/tools/gflags/MANIFEST.in +++ /dev/null @@ -1,19 +0,0 @@ -include AUTHORS -include COPYING -include ChangeLog -include MANIFEST.in -include Makefile -include NEWS -include README -include debian/README -include debian/changelog -include debian/compat -include debian/control -include debian/copyright -include debian/docs -include debian/rules -include gflags.py -include gflags2man.py -include gflags_validators.py -include setup.py -recursive-include tests *.py diff --git a/tools/gflags/Makefile b/tools/gflags/Makefile deleted file mode 100644 index 6627c32a5e8cb7..00000000000000 --- a/tools/gflags/Makefile +++ /dev/null @@ -1,69 +0,0 @@ - -prep: - @echo - # Install needed packages - sudo apt-get install subversion fakeroot python-setuptools python-subversion - # - @echo - # Check that the person has .pypirc - @if [ ! -e ~/.pypirc ]; then \ - echo "Please create a ~/.pypirc with the following contents:"; \ - echo "[server-login]"; \ - echo "username:google_opensource"; \ - echo "password:"; \ - fi - # - @echo - # FIXME(tansell): Check that the person has .dputrc for PPA - -clean: - # Clean up any build files. - python setup.py clean --all - # - # Clean up the debian stuff - fakeroot ./debian/rules clean - # - # Clean up everything else - rm MANIFEST || true - rm -rf build-* - # - # Clean up the egg files - rm -rf *egg* - # - # Remove dist - rm -rf dist - -dist: - # Generate the tarball based on MANIFEST.in - python setup.py sdist - # - # Build the debian packages - fakeroot ./debian/rules binary - mv ../python-gflags*.deb ./dist/ - # - # Build the python Egg - python setup.py bdist_egg - # - @echo - @echo "Files to upload:" - @echo "--------------------------" - @ls -l ./dist/ - -push: - # Send the updates to svn - # Upload the source package to code.google.com - - /home/build/opensource/tools/googlecode_upload.py \ - -p python-gflags ./dist/* - # - # Upload the package to PyPi - - python setup.py sdist upload - - python setup.py bdist_egg upload - # - # Upload the package to the ppa - # FIXME(tansell): dput should run here - -check: - # Run all the tests. - for test in tests/*.py; do PYTHONPATH=. python $$test || exit 1; done - -.PHONY: prep dist clean push check diff --git a/tools/gflags/NEWS b/tools/gflags/NEWS deleted file mode 100644 index 0142abc5fd296c..00000000000000 --- a/tools/gflags/NEWS +++ /dev/null @@ -1,77 +0,0 @@ -== 18 January 2012 == - -[Prependum:] I just realized I should have named the new version 2.0, -to reflect the new ownership and status as a community run project. -Not too late, I guess. I've just released python-gflags 2.0, which is -identical to python-gflags 1.8 except for the version number. - -I've just released python-gflags 1.8. This fixes a bug, allowing -modules defining flags to be re-imported without raising duplicate -flag errors. - -Administrative note: In the coming weeks, I'll be stepping down as -maintainer for the python-gflags project, and as part of that Google -is relinquishing ownership of the project; it will now be entirely -community run. The remaining -[http://python-gflags.googlecode.com/svn/tags/python-gflags-1.8/ChangeLog changes] -in this release reflect that shift. - - -=== 20 December 2011 === - -I've just released python-gflags 1.7. The major change here is -improved unicode support, in both flag default values and -help-strings. We've also made big steps toward making gflags work -with python 3.x (while keeping 2.4 compatibility), and improving ---help output in the common case where output is a tty. - -For a full list of changes since last release, see the -[http://python-gflags.googlecode.com/svn/tags/python-gflags-1.7/ChangeLog ChangeLog]. - -=== 29 July 2011 === - -I've just released python-gflags 1.6. This release has only minor -changes, including support for multi_float flags. The full list of -changes is in the -[http://python-gflags.googlecode.com/svn/tags/python-gflags-1.6/ChangeLog ChangeLog]. - -The major change with this release is procedural: I've changed the -internal tools used to integrate Google-supplied patches for gflags -into the opensource release. These new tools should result in more -frequent updates with better change descriptions. They will also -result in future `ChangeLog` entries being much more verbose (for -better or for worse). - -=== 26 January 2011 === - -I've just released python-gflags 1.5.1. I had improperly packaged -python-gflags 1.5, so it probably doesn't work. All users who have -updated to python-gflags 1.5 are encouraged to update again to 1.5.1. - -=== 24 January 2011 === - -I've just released python-gflags 1.5. This release adds support for -flag verifiers: small functions you can associate with flags, that are -called whenever the flag value is set or modified, and can verify that -the new value is legal. It also has other, minor changes, described -in the -[http://python-gflags.googlecode.com/svn/tags/python-gflags-1.5/ChangeLog ChangeLog]. - -=== 11 October 2010 === - -I've just released python-gflags 1.4. This release has only minor -changes from 1.3, including support for printing flags of a specific -module, allowing key-flags to work with special flags, somewhat better -error messaging, and -[http://python-gflags.googlecode.com/svn/tags/python-gflags-1.4/ChangeLog so forth]. -If 1.3 is working well for you, there's no particular reason to upgrade. - -=== 4 January 2010 === - -I just released python-gflags 1.3. This is the first python-gflags -release; it is version 1.3 because this code is forked from the 1.3 -release of google-gflags. - -I don't have a tarball or .deb file up quite yet, so for now you will -have to get the source files by browsing under the 'source' -tag. Downloadable files will be available soon. diff --git a/tools/gflags/PKG-INFO b/tools/gflags/PKG-INFO deleted file mode 100644 index faab7198f2608a..00000000000000 --- a/tools/gflags/PKG-INFO +++ /dev/null @@ -1,10 +0,0 @@ -Metadata-Version: 1.0 -Name: python-gflags -Version: 2.0 -Summary: Google Commandline Flags Module -Home-page: http://code.google.com/p/python-gflags -Author: Google Inc. and others -Author-email: google-gflags@googlegroups.com -License: BSD -Description: UNKNOWN -Platform: UNKNOWN diff --git a/tools/gflags/README b/tools/gflags/README deleted file mode 100644 index 81daa7ab49aaf6..00000000000000 --- a/tools/gflags/README +++ /dev/null @@ -1,23 +0,0 @@ -This repository contains a python implementation of the Google commandline -flags module. - - GFlags defines a *distributed* command line system, replacing systems like - getopt(), optparse and manual argument processing. Rather than an application - having to define all flags in or near main(), each python module defines flags - that are useful to it. When one python module imports another, it gains - access to the other's flags. - - It includes the ability to define flag types (boolean, float, interger, list), - autogeneration of help (in both human and machine readable format) and reading - arguments from a file. It also includes the ability to automatically generate - man pages from the help flags. - -Documentation for implementation is at the top of gflags.py file. - -To install the python module, run - python ./setup.py install - -When you install this library, you also get a helper application, -gflags2man.py, installed into /usr/local/bin. You can run gflags2man.py to -create an instant man page, with all the commandline flags and their docs, for -any C++ or python program you've written using the gflags library. diff --git a/tools/gflags/debian/README b/tools/gflags/debian/README deleted file mode 100644 index 57becfda757e1c..00000000000000 --- a/tools/gflags/debian/README +++ /dev/null @@ -1,7 +0,0 @@ -The list of files here isn't complete. For a step-by-step guide on -how to set this package up correctly, check out - http://www.debian.org/doc/maint-guide/ - -Most of the files that are in this directory are boilerplate. -However, you may need to change the list of binary-arch dependencies -in 'rules'. diff --git a/tools/gflags/debian/changelog b/tools/gflags/debian/changelog deleted file mode 100644 index 5e6457e2d7a7b4..00000000000000 --- a/tools/gflags/debian/changelog +++ /dev/null @@ -1,54 +0,0 @@ -python-gflags (2.0-1) unstable; urgency=low - - * New upstream release. - - -- Google Inc. Wed, 18 Jan 2012 13:57:39 -0800 - -python-gflags (1.8-1) unstable; urgency=low - - * New upstream release. - - -- Google Inc. Wed, 18 Jan 2012 11:54:03 -0800 - -python-gflags (1.7-1) unstable; urgency=low - - * New upstream release. - - -- Google Inc. Tue, 20 Dec 2011 17:10:41 -0800 - -python-gflags (1.6-1) unstable; urgency=low - - * New upstream release. - - -- Google Inc. Fri, 29 Jul 2011 12:24:08 -0700 - -python-gflags (1.5.1-1) unstable; urgency=low - - * New upstream release (fixes manifest and setup.py files) - - -- Google Inc. Wed, 26 Jan 2011 13:50:46 -0800 - -python-gflags (1.5-1) unstable; urgency=low - - * New upstream release. - - -- Google Inc. Mon, 24 Jan 2011 16:58:10 -0800 - -python-gflags (1.4-1) unstable; urgency=low - - * New upstream release. - - -- Google Inc. Wed, 13 Oct 2010 17:40:12 -0700 - -python-gflags (1.3-2) unstable; urgency=low - - * Fixed man-page generation. - - -- Tim 'mithro' Ansell Mon, 07 Jan 2010 13:46:10 +1100 - -python-gflags (1.3-1) unstable; urgency=low - - * Initial release. - * Packaging based on gflags 1.3 - - -- Tim 'mithro' Ansell Mon, 04 Jan 2010 18:46:10 -0800 diff --git a/tools/gflags/debian/compat b/tools/gflags/debian/compat deleted file mode 100644 index 7ed6ff82de6bcc..00000000000000 --- a/tools/gflags/debian/compat +++ /dev/null @@ -1 +0,0 @@ -5 diff --git a/tools/gflags/debian/control b/tools/gflags/debian/control deleted file mode 100644 index 65ca8604e20917..00000000000000 --- a/tools/gflags/debian/control +++ /dev/null @@ -1,25 +0,0 @@ -Source: python-gflags -Section: python -XS-Python-Version: all -Priority: optional -Maintainer: Craig Silverstein -Build-Depends-Indep: python-central (>= 0.5.6), python-setuptools (>= 0.6b3-1), python-all -Build-Depends: debhelper (>= 5.0.38) -Standards-Version: 3.7.2 - -Package: python-gflags -Architecture: all -Depends: ${python:Depends} -XB-Python-Version: ${python:Versions} -Description: A Python implementation of the Google commandline flags module - . - GFlags defines a *distributed* command line system, replacing systems like - getopt(), optparse and manual argument processing. Rather than an application - having to define all flags in or near main(), each Python module defines flags - that are useful to it. When one Python module imports another, it gains - access to the other's flags. - . - It includes the ability to define flag types (boolean, float, interger, list), - autogeneration of help (in both human and machine readable format) and reading - arguments from a file. It also includes the ability to automatically generate - man pages from the help flags. diff --git a/tools/gflags/debian/copyright b/tools/gflags/debian/copyright deleted file mode 100644 index 532790017f8d10..00000000000000 --- a/tools/gflags/debian/copyright +++ /dev/null @@ -1,41 +0,0 @@ -This package was debianized by Craig Silverstein on -Wed, 18 Jan 2012 13:57:39 -0800. - -It was downloaded from http://code.google.com/p/python-gflags/downloads/list - -Upstream Author: Google Inc. and others -Copyright: Google Inc. and others - -License: - -Copyright (c) 2006, Google Inc. -All rights reserved. - -Redistribution and use in source and binary forms, with or without -modification, are permitted provided that the following conditions are -met: - - * Redistributions of source code must retain the above copyright -notice, this list of conditions and the following disclaimer. - * Redistributions in binary form must reproduce the above -copyright notice, this list of conditions and the following disclaimer -in the documentation and/or other materials provided with the -distribution. - * Neither the name of Google Inc. nor the names of its -contributors may be used to endorse or promote products derived from -this software without specific prior written permission. - -THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -The Debian packaging is (C) 2011, Tim 'mithro' Ansell and -is licensed under the above. diff --git a/tools/gflags/debian/docs b/tools/gflags/debian/docs deleted file mode 100644 index 6f12db50845a5d..00000000000000 --- a/tools/gflags/debian/docs +++ /dev/null @@ -1,2 +0,0 @@ -AUTHORS -README diff --git a/tools/gflags/debian/rules b/tools/gflags/debian/rules deleted file mode 100755 index 0840b5ef8c89b8..00000000000000 --- a/tools/gflags/debian/rules +++ /dev/null @@ -1,62 +0,0 @@ -#!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# GNU copyright 1997 to 1999 by Joey Hess. - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - -PYTHON := /usr/bin/python -#PYVER := $(shell $(PYTHON) -c 'import sys; print sys.version[:3]') -PYVERS = $(shell pyversions -vr) - -build: $(PYVERS:%=build-python%) - touch $@ - -build-python%: - dh_testdir - python$* setup.py build - touch $@ - -clean: - dh_testdir - dh_testroot - rm -f build-python* - rm -rf build - -find . -name '*.py[co]' | xargs rm -f - dh_clean - -install: build $(PYVERS:%=install-python%) - -install-python%: - dh_testdir - dh_testroot - dh_clean -k - dh_installdirs - python$* setup.py install --root=$(CURDIR)/debian/python-gflags --prefix=/usr - # Scripts should not have a .py on the end of them - mv $(CURDIR)/debian/python-gflags/usr/bin/gflags2man.py $(CURDIR)/debian/python-gflags/usr/bin/gflags2man - # Generate a man file for gflags2man - mkdir -p $(CURDIR)/debian/python-gflags/usr/share/man/man1 - PYTHONPATH=$(CURDIR)/debian/.. python$* gflags2man.py --dest_dir $(CURDIR)/debian/python-gflags/usr/share/man/man1 $(CURDIR)/debian/python-gflags/usr/bin/gflags2man - -# Build architecture-independent files here. -binary-indep: build install - dh_testdir - dh_testroot - dh_installchangelogs -k ChangeLog - dh_installdocs - dh_pycentral - dh_compress -X.py - dh_fixperms - dh_installdeb - dh_gencontrol - dh_md5sums - dh_builddeb - -# Build architecture-dependent files here. -binary-arch: build install -# We have nothing to do by default. - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install configure diff --git a/tools/gflags/gflags.py b/tools/gflags/gflags.py deleted file mode 100644 index 822256a6f8a1ec..00000000000000 --- a/tools/gflags/gflags.py +++ /dev/null @@ -1,2862 +0,0 @@ -#!/usr/bin/env python -# -# Copyright (c) 2002, Google Inc. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -# -# --- -# Author: Chad Lester -# Design and style contributions by: -# Amit Patel, Bogdan Cocosel, Daniel Dulitz, Eric Tiedemann, -# Eric Veach, Laurence Gonsalves, Matthew Springer -# Code reorganized a bit by Craig Silverstein - -"""This module is used to define and parse command line flags. - -This module defines a *distributed* flag-definition policy: rather than -an application having to define all flags in or near main(), each python -module defines flags that are useful to it. When one python module -imports another, it gains access to the other's flags. (This is -implemented by having all modules share a common, global registry object -containing all the flag information.) - -Flags are defined through the use of one of the DEFINE_xxx functions. -The specific function used determines how the flag is parsed, checked, -and optionally type-converted, when it's seen on the command line. - - -IMPLEMENTATION: DEFINE_* creates a 'Flag' object and registers it with a -'FlagValues' object (typically the global FlagValues FLAGS, defined -here). The 'FlagValues' object can scan the command line arguments and -pass flag arguments to the corresponding 'Flag' objects for -value-checking and type conversion. The converted flag values are -available as attributes of the 'FlagValues' object. - -Code can access the flag through a FlagValues object, for instance -gflags.FLAGS.myflag. Typically, the __main__ module passes the command -line arguments to gflags.FLAGS for parsing. - -At bottom, this module calls getopt(), so getopt functionality is -supported, including short- and long-style flags, and the use of -- to -terminate flags. - -Methods defined by the flag module will throw 'FlagsError' exceptions. -The exception argument will be a human-readable string. - - -FLAG TYPES: This is a list of the DEFINE_*'s that you can do. All flags -take a name, default value, help-string, and optional 'short' name -(one-letter name). Some flags have other arguments, which are described -with the flag. - -DEFINE_string: takes any input, and interprets it as a string. - -DEFINE_bool or -DEFINE_boolean: typically does not take an argument: say --myflag to - set FLAGS.myflag to true, or --nomyflag to set - FLAGS.myflag to false. Alternately, you can say - --myflag=true or --myflag=t or --myflag=1 or - --myflag=false or --myflag=f or --myflag=0 - -DEFINE_float: takes an input and interprets it as a floating point - number. Takes optional args lower_bound and upper_bound; - if the number specified on the command line is out of - range, it will raise a FlagError. - -DEFINE_integer: takes an input and interprets it as an integer. Takes - optional args lower_bound and upper_bound as for floats. - -DEFINE_enum: takes a list of strings which represents legal values. If - the command-line value is not in this list, raise a flag - error. Otherwise, assign to FLAGS.flag as a string. - -DEFINE_list: Takes a comma-separated list of strings on the commandline. - Stores them in a python list object. - -DEFINE_spaceseplist: Takes a space-separated list of strings on the - commandline. Stores them in a python list object. - Example: --myspacesepflag "foo bar baz" - -DEFINE_multistring: The same as DEFINE_string, except the flag can be - specified more than once on the commandline. The - result is a python list object (list of strings), - even if the flag is only on the command line once. - -DEFINE_multi_int: The same as DEFINE_integer, except the flag can be - specified more than once on the commandline. The - result is a python list object (list of ints), even if - the flag is only on the command line once. - - -SPECIAL FLAGS: There are a few flags that have special meaning: - --help prints a list of all the flags in a human-readable fashion - --helpshort prints a list of all key flags (see below). - --helpxml prints a list of all flags, in XML format. DO NOT parse - the output of --help and --helpshort. Instead, parse - the output of --helpxml. For more info, see - "OUTPUT FOR --helpxml" below. - --flagfile=foo read flags from file foo. - --undefok=f1,f2 ignore unrecognized option errors for f1,f2. - For boolean flags, you should use --undefok=boolflag, and - --boolflag and --noboolflag will be accepted. Do not use - --undefok=noboolflag. - -- as in getopt(), terminates flag-processing - - -FLAGS VALIDATORS: If your program: - - requires flag X to be specified - - needs flag Y to match a regular expression - - or requires any more general constraint to be satisfied -then validators are for you! - -Each validator represents a constraint over one flag, which is enforced -starting from the initial parsing of the flags and until the program -terminates. - -Also, lower_bound and upper_bound for numerical flags are enforced using flag -validators. - -Howto: -If you want to enforce a constraint over one flag, use - -gflags.RegisterValidator(flag_name, - checker, - message='Flag validation failed', - flag_values=FLAGS) - -After flag values are initially parsed, and after any change to the specified -flag, method checker(flag_value) will be executed. If constraint is not -satisfied, an IllegalFlagValue exception will be raised. See -RegisterValidator's docstring for a detailed explanation on how to construct -your own checker. - - -EXAMPLE USAGE: - -FLAGS = gflags.FLAGS - -gflags.DEFINE_integer('my_version', 0, 'Version number.') -gflags.DEFINE_string('filename', None, 'Input file name', short_name='f') - -gflags.RegisterValidator('my_version', - lambda value: value % 2 == 0, - message='--my_version must be divisible by 2') -gflags.MarkFlagAsRequired('filename') - - -NOTE ON --flagfile: - -Flags may be loaded from text files in addition to being specified on -the commandline. - -Any flags you don't feel like typing, throw them in a file, one flag per -line, for instance: - --myflag=myvalue - --nomyboolean_flag -You then specify your file with the special flag '--flagfile=somefile'. -You CAN recursively nest flagfile= tokens OR use multiple files on the -command line. Lines beginning with a single hash '#' or a double slash -'//' are comments in your flagfile. - -Any flagfile= will be interpreted as having a relative path from -the current working directory rather than from the place the file was -included from: - myPythonScript.py --flagfile=config/somefile.cfg - -If somefile.cfg includes further --flagfile= directives, these will be -referenced relative to the original CWD, not from the directory the -including flagfile was found in! - -The caveat applies to people who are including a series of nested files -in a different dir than they are executing out of. Relative path names -are always from CWD, not from the directory of the parent include -flagfile. We do now support '~' expanded directory names. - -Absolute path names ALWAYS work! - - -EXAMPLE USAGE: - - - FLAGS = gflags.FLAGS - - # Flag names are globally defined! So in general, we need to be - # careful to pick names that are unlikely to be used by other libraries. - # If there is a conflict, we'll get an error at import time. - gflags.DEFINE_string('name', 'Mr. President', 'your name') - gflags.DEFINE_integer('age', None, 'your age in years', lower_bound=0) - gflags.DEFINE_boolean('debug', False, 'produces debugging output') - gflags.DEFINE_enum('gender', 'male', ['male', 'female'], 'your gender') - - def main(argv): - try: - argv = FLAGS(argv) # parse flags - except gflags.FlagsError, e: - print '%s\\nUsage: %s ARGS\\n%s' % (e, sys.argv[0], FLAGS) - sys.exit(1) - if FLAGS.debug: print 'non-flag arguments:', argv - print 'Happy Birthday', FLAGS.name - if FLAGS.age is not None: - print 'You are a %d year old %s' % (FLAGS.age, FLAGS.gender) - - if __name__ == '__main__': - main(sys.argv) - - -KEY FLAGS: - -As we already explained, each module gains access to all flags defined -by all the other modules it transitively imports. In the case of -non-trivial scripts, this means a lot of flags ... For documentation -purposes, it is good to identify the flags that are key (i.e., really -important) to a module. Clearly, the concept of "key flag" is a -subjective one. When trying to determine whether a flag is key to a -module or not, assume that you are trying to explain your module to a -potential user: which flags would you really like to mention first? - -We'll describe shortly how to declare which flags are key to a module. -For the moment, assume we know the set of key flags for each module. -Then, if you use the app.py module, you can use the --helpshort flag to -print only the help for the flags that are key to the main module, in a -human-readable format. - -NOTE: If you need to parse the flag help, do NOT use the output of ---help / --helpshort. That output is meant for human consumption, and -may be changed in the future. Instead, use --helpxml; flags that are -key for the main module are marked there with a yes element. - -The set of key flags for a module M is composed of: - -1. Flags defined by module M by calling a DEFINE_* function. - -2. Flags that module M explictly declares as key by using the function - - DECLARE_key_flag() - -3. Key flags of other modules that M specifies by using the function - - ADOPT_module_key_flags() - - This is a "bulk" declaration of key flags: each flag that is key for - becomes key for the current module too. - -Notice that if you do not use the functions described at points 2 and 3 -above, then --helpshort prints information only about the flags defined -by the main module of our script. In many cases, this behavior is good -enough. But if you move part of the main module code (together with the -related flags) into a different module, then it is nice to use -DECLARE_key_flag / ADOPT_module_key_flags and make sure --helpshort -lists all relevant flags (otherwise, your code refactoring may confuse -your users). - -Note: each of DECLARE_key_flag / ADOPT_module_key_flags has its own -pluses and minuses: DECLARE_key_flag is more targeted and may lead a -more focused --helpshort documentation. ADOPT_module_key_flags is good -for cases when an entire module is considered key to the current script. -Also, it does not require updates to client scripts when a new flag is -added to the module. - - -EXAMPLE USAGE 2 (WITH KEY FLAGS): - -Consider an application that contains the following three files (two -auxiliary modules and a main module) - -File libfoo.py: - - import gflags - - gflags.DEFINE_integer('num_replicas', 3, 'Number of replicas to start') - gflags.DEFINE_boolean('rpc2', True, 'Turn on the usage of RPC2.') - - ... some code ... - -File libbar.py: - - import gflags - - gflags.DEFINE_string('bar_gfs_path', '/gfs/path', - 'Path to the GFS files for libbar.') - gflags.DEFINE_string('email_for_bar_errors', 'bar-team@google.com', - 'Email address for bug reports about module libbar.') - gflags.DEFINE_boolean('bar_risky_hack', False, - 'Turn on an experimental and buggy optimization.') - - ... some code ... - -File myscript.py: - - import gflags - import libfoo - import libbar - - gflags.DEFINE_integer('num_iterations', 0, 'Number of iterations.') - - # Declare that all flags that are key for libfoo are - # key for this module too. - gflags.ADOPT_module_key_flags(libfoo) - - # Declare that the flag --bar_gfs_path (defined in libbar) is key - # for this module. - gflags.DECLARE_key_flag('bar_gfs_path') - - ... some code ... - -When myscript is invoked with the flag --helpshort, the resulted help -message lists information about all the key flags for myscript: ---num_iterations, --num_replicas, --rpc2, and --bar_gfs_path. - -Of course, myscript uses all the flags declared by it (in this case, -just --num_replicas) or by any of the modules it transitively imports -(e.g., the modules libfoo, libbar). E.g., it can access the value of -FLAGS.bar_risky_hack, even if --bar_risky_hack is not declared as a key -flag for myscript. - - -OUTPUT FOR --helpxml: - -The --helpxml flag generates output with the following structure: - - - - PROGRAM_BASENAME - MAIN_MODULE_DOCSTRING - ( - [yes] - DECLARING_MODULE - FLAG_NAME - FLAG_HELP_MESSAGE - DEFAULT_FLAG_VALUE - CURRENT_FLAG_VALUE - FLAG_TYPE - [OPTIONAL_ELEMENTS] - )* - - -Notes: - -1. The output is intentionally similar to the output generated by the -C++ command-line flag library. The few differences are due to the -Python flags that do not have a C++ equivalent (at least not yet), -e.g., DEFINE_list. - -2. New XML elements may be added in the future. - -3. DEFAULT_FLAG_VALUE is in serialized form, i.e., the string you can -pass for this flag on the command-line. E.g., for a flag defined -using DEFINE_list, this field may be foo,bar, not ['foo', 'bar']. - -4. CURRENT_FLAG_VALUE is produced using str(). This means that the -string 'false' will be represented in the same way as the boolean -False. Using repr() would have removed this ambiguity and simplified -parsing, but would have broken the compatibility with the C++ -command-line flags. - -5. OPTIONAL_ELEMENTS describe elements relevant for certain kinds of -flags: lower_bound, upper_bound (for flags that specify bounds), -enum_value (for enum flags), list_separator (for flags that consist of -a list of values, separated by a special token). - -6. We do not provide any example here: please use --helpxml instead. - -This module requires at least python 2.2.1 to run. -""" - -import cgi -import getopt -import os -import re -import string -import struct -import sys -# pylint: disable-msg=C6204 -try: - import fcntl -except ImportError: - fcntl = None -try: - # Importing termios will fail on non-unix platforms. - import termios -except ImportError: - termios = None - -import gflags_validators -# pylint: enable-msg=C6204 - - -# Are we running under pychecker? -_RUNNING_PYCHECKER = 'pychecker.python' in sys.modules - - -def _GetCallingModuleObjectAndName(): - """Returns the module that's calling into this module. - - We generally use this function to get the name of the module calling a - DEFINE_foo... function. - """ - # Walk down the stack to find the first globals dict that's not ours. - for depth in range(1, sys.getrecursionlimit()): - if not sys._getframe(depth).f_globals is globals(): - globals_for_frame = sys._getframe(depth).f_globals - module, module_name = _GetModuleObjectAndName(globals_for_frame) - if module_name is not None: - return module, module_name - raise AssertionError("No module was found") - - -def _GetCallingModule(): - """Returns the name of the module that's calling into this module.""" - return _GetCallingModuleObjectAndName()[1] - - -def _GetThisModuleObjectAndName(): - """Returns: (module object, module name) for this module.""" - return _GetModuleObjectAndName(globals()) - - -# module exceptions: -class FlagsError(Exception): - """The base class for all flags errors.""" - pass - - -class DuplicateFlag(FlagsError): - """Raised if there is a flag naming conflict.""" - pass - -class CantOpenFlagFileError(FlagsError): - """Raised if flagfile fails to open: doesn't exist, wrong permissions, etc.""" - pass - - -class DuplicateFlagCannotPropagateNoneToSwig(DuplicateFlag): - """Special case of DuplicateFlag -- SWIG flag value can't be set to None. - - This can be raised when a duplicate flag is created. Even if allow_override is - True, we still abort if the new value is None, because it's currently - impossible to pass None default value back to SWIG. See FlagValues.SetDefault - for details. - """ - pass - - -class DuplicateFlagError(DuplicateFlag): - """A DuplicateFlag whose message cites the conflicting definitions. - - A DuplicateFlagError conveys more information than a DuplicateFlag, - namely the modules where the conflicting definitions occur. This - class was created to avoid breaking external modules which depend on - the existing DuplicateFlags interface. - """ - - def __init__(self, flagname, flag_values, other_flag_values=None): - """Create a DuplicateFlagError. - - Args: - flagname: Name of the flag being redefined. - flag_values: FlagValues object containing the first definition of - flagname. - other_flag_values: If this argument is not None, it should be the - FlagValues object where the second definition of flagname occurs. - If it is None, we assume that we're being called when attempting - to create the flag a second time, and we use the module calling - this one as the source of the second definition. - """ - self.flagname = flagname - first_module = flag_values.FindModuleDefiningFlag( - flagname, default='') - if other_flag_values is None: - second_module = _GetCallingModule() - else: - second_module = other_flag_values.FindModuleDefiningFlag( - flagname, default='') - msg = "The flag '%s' is defined twice. First from %s, Second from %s" % ( - self.flagname, first_module, second_module) - DuplicateFlag.__init__(self, msg) - - -class IllegalFlagValue(FlagsError): - """The flag command line argument is illegal.""" - pass - - -class UnrecognizedFlag(FlagsError): - """Raised if a flag is unrecognized.""" - pass - - -# An UnrecognizedFlagError conveys more information than an UnrecognizedFlag. -# Since there are external modules that create DuplicateFlags, the interface to -# DuplicateFlag shouldn't change. The flagvalue will be assigned the full value -# of the flag and its argument, if any, allowing handling of unrecognized flags -# in an exception handler. -# If flagvalue is the empty string, then this exception is an due to a -# reference to a flag that was not already defined. -class UnrecognizedFlagError(UnrecognizedFlag): - def __init__(self, flagname, flagvalue=''): - self.flagname = flagname - self.flagvalue = flagvalue - UnrecognizedFlag.__init__( - self, "Unknown command line flag '%s'" % flagname) - -# Global variable used by expvar -_exported_flags = {} -_help_width = 80 # width of help output - - -def GetHelpWidth(): - """Returns: an integer, the width of help lines that is used in TextWrap.""" - if (not sys.stdout.isatty()) or (termios is None) or (fcntl is None): - return _help_width - try: - data = fcntl.ioctl(sys.stdout, termios.TIOCGWINSZ, '1234') - columns = struct.unpack('hh', data)[1] - # Emacs mode returns 0. - # Here we assume that any value below 40 is unreasonable - if columns >= 40: - return columns - # Returning an int as default is fine, int(int) just return the int. - return int(os.getenv('COLUMNS', _help_width)) - - except (TypeError, IOError, struct.error): - return _help_width - - -def CutCommonSpacePrefix(text): - """Removes a common space prefix from the lines of a multiline text. - - If the first line does not start with a space, it is left as it is and - only in the remaining lines a common space prefix is being searched - for. That means the first line will stay untouched. This is especially - useful to turn doc strings into help texts. This is because some - people prefer to have the doc comment start already after the - apostrophe and then align the following lines while others have the - apostrophes on a separate line. - - The function also drops trailing empty lines and ignores empty lines - following the initial content line while calculating the initial - common whitespace. - - Args: - text: text to work on - - Returns: - the resulting text - """ - text_lines = text.splitlines() - # Drop trailing empty lines - while text_lines and not text_lines[-1]: - text_lines = text_lines[:-1] - if text_lines: - # We got some content, is the first line starting with a space? - if text_lines[0] and text_lines[0][0].isspace(): - text_first_line = [] - else: - text_first_line = [text_lines.pop(0)] - # Calculate length of common leading whitespace (only over content lines) - common_prefix = os.path.commonprefix([line for line in text_lines if line]) - space_prefix_len = len(common_prefix) - len(common_prefix.lstrip()) - # If we have a common space prefix, drop it from all lines - if space_prefix_len: - for index in xrange(len(text_lines)): - if text_lines[index]: - text_lines[index] = text_lines[index][space_prefix_len:] - return '\n'.join(text_first_line + text_lines) - return '' - - -def TextWrap(text, length=None, indent='', firstline_indent=None, tabs=' '): - """Wraps a given text to a maximum line length and returns it. - - We turn lines that only contain whitespace into empty lines. We keep - new lines and tabs (e.g., we do not treat tabs as spaces). - - Args: - text: text to wrap - length: maximum length of a line, includes indentation - if this is None then use GetHelpWidth() - indent: indent for all but first line - firstline_indent: indent for first line; if None, fall back to indent - tabs: replacement for tabs - - Returns: - wrapped text - - Raises: - FlagsError: if indent not shorter than length - FlagsError: if firstline_indent not shorter than length - """ - # Get defaults where callee used None - if length is None: - length = GetHelpWidth() - if indent is None: - indent = '' - if len(indent) >= length: - raise FlagsError('Indent must be shorter than length') - # In line we will be holding the current line which is to be started - # with indent (or firstline_indent if available) and then appended - # with words. - if firstline_indent is None: - firstline_indent = '' - line = indent - else: - line = firstline_indent - if len(firstline_indent) >= length: - raise FlagsError('First line indent must be shorter than length') - - # If the callee does not care about tabs we simply convert them to - # spaces If callee wanted tabs to be single space then we do that - # already here. - if not tabs or tabs == ' ': - text = text.replace('\t', ' ') - else: - tabs_are_whitespace = not tabs.strip() - - line_regex = re.compile('([ ]*)(\t*)([^ \t]+)', re.MULTILINE) - - # Split the text into lines and the lines with the regex above. The - # resulting lines are collected in result[]. For each split we get the - # spaces, the tabs and the next non white space (e.g. next word). - result = [] - for text_line in text.splitlines(): - # Store result length so we can find out whether processing the next - # line gave any new content - old_result_len = len(result) - # Process next line with line_regex. For optimization we do an rstrip(). - # - process tabs (changes either line or word, see below) - # - process word (first try to squeeze on line, then wrap or force wrap) - # Spaces found on the line are ignored, they get added while wrapping as - # needed. - for spaces, current_tabs, word in line_regex.findall(text_line.rstrip()): - # If tabs weren't converted to spaces, handle them now - if current_tabs: - # If the last thing we added was a space anyway then drop - # it. But let's not get rid of the indentation. - if (((result and line != indent) or - (not result and line != firstline_indent)) and line[-1] == ' '): - line = line[:-1] - # Add the tabs, if that means adding whitespace, just add it at - # the line, the rstrip() code while shorten the line down if - # necessary - if tabs_are_whitespace: - line += tabs * len(current_tabs) - else: - # if not all tab replacement is whitespace we prepend it to the word - word = tabs * len(current_tabs) + word - # Handle the case where word cannot be squeezed onto current last line - if len(line) + len(word) > length and len(indent) + len(word) <= length: - result.append(line.rstrip()) - line = indent + word - word = '' - # No space left on line or can we append a space? - if len(line) + 1 >= length: - result.append(line.rstrip()) - line = indent - else: - line += ' ' - # Add word and shorten it up to allowed line length. Restart next - # line with indent and repeat, or add a space if we're done (word - # finished) This deals with words that cannot fit on one line - # (e.g. indent + word longer than allowed line length). - while len(line) + len(word) >= length: - line += word - result.append(line[:length]) - word = line[length:] - line = indent - # Default case, simply append the word and a space - if word: - line += word + ' ' - # End of input line. If we have content we finish the line. If the - # current line is just the indent but we had content in during this - # original line then we need to add an empty line. - if (result and line != indent) or (not result and line != firstline_indent): - result.append(line.rstrip()) - elif len(result) == old_result_len: - result.append('') - line = indent - - return '\n'.join(result) - - -def DocToHelp(doc): - """Takes a __doc__ string and reformats it as help.""" - - # Get rid of starting and ending white space. Using lstrip() or even - # strip() could drop more than maximum of first line and right space - # of last line. - doc = doc.strip() - - # Get rid of all empty lines - whitespace_only_line = re.compile('^[ \t]+$', re.M) - doc = whitespace_only_line.sub('', doc) - - # Cut out common space at line beginnings - doc = CutCommonSpacePrefix(doc) - - # Just like this module's comment, comments tend to be aligned somehow. - # In other words they all start with the same amount of white space - # 1) keep double new lines - # 2) keep ws after new lines if not empty line - # 3) all other new lines shall be changed to a space - # Solution: Match new lines between non white space and replace with space. - doc = re.sub('(?<=\S)\n(?=\S)', ' ', doc, re.M) - - return doc - - -def _GetModuleObjectAndName(globals_dict): - """Returns the module that defines a global environment, and its name. - - Args: - globals_dict: A dictionary that should correspond to an environment - providing the values of the globals. - - Returns: - A pair consisting of (1) module object and (2) module name (a - string). Returns (None, None) if the module could not be - identified. - """ - # The use of .items() (instead of .iteritems()) is NOT a mistake: if - # a parallel thread imports a module while we iterate over - # .iteritems() (not nice, but possible), we get a RuntimeError ... - # Hence, we use the slightly slower but safer .items(). - for name, module in sys.modules.items(): - if getattr(module, '__dict__', None) is globals_dict: - if name == '__main__': - # Pick a more informative name for the main module. - name = sys.argv[0] - return (module, name) - return (None, None) - - -def _GetMainModule(): - """Returns: string, name of the module from which execution started.""" - # First, try to use the same logic used by _GetCallingModuleObjectAndName(), - # i.e., call _GetModuleObjectAndName(). For that we first need to - # find the dictionary that the main module uses to store the - # globals. - # - # That's (normally) the same dictionary object that the deepest - # (oldest) stack frame is using for globals. - deepest_frame = sys._getframe(0) - while deepest_frame.f_back is not None: - deepest_frame = deepest_frame.f_back - globals_for_main_module = deepest_frame.f_globals - main_module_name = _GetModuleObjectAndName(globals_for_main_module)[1] - # The above strategy fails in some cases (e.g., tools that compute - # code coverage by redefining, among other things, the main module). - # If so, just use sys.argv[0]. We can probably always do this, but - # it's safest to try to use the same logic as _GetCallingModuleObjectAndName() - if main_module_name is None: - main_module_name = sys.argv[0] - return main_module_name - - -class FlagValues: - """Registry of 'Flag' objects. - - A 'FlagValues' can then scan command line arguments, passing flag - arguments through to the 'Flag' objects that it owns. It also - provides easy access to the flag values. Typically only one - 'FlagValues' object is needed by an application: gflags.FLAGS - - This class is heavily overloaded: - - 'Flag' objects are registered via __setitem__: - FLAGS['longname'] = x # register a new flag - - The .value attribute of the registered 'Flag' objects can be accessed - as attributes of this 'FlagValues' object, through __getattr__. Both - the long and short name of the original 'Flag' objects can be used to - access its value: - FLAGS.longname # parsed flag value - FLAGS.x # parsed flag value (short name) - - Command line arguments are scanned and passed to the registered 'Flag' - objects through the __call__ method. Unparsed arguments, including - argv[0] (e.g. the program name) are returned. - argv = FLAGS(sys.argv) # scan command line arguments - - The original registered Flag objects can be retrieved through the use - of the dictionary-like operator, __getitem__: - x = FLAGS['longname'] # access the registered Flag object - - The str() operator of a 'FlagValues' object provides help for all of - the registered 'Flag' objects. - """ - - def __init__(self): - # Since everything in this class is so heavily overloaded, the only - # way of defining and using fields is to access __dict__ directly. - - # Dictionary: flag name (string) -> Flag object. - self.__dict__['__flags'] = {} - # Dictionary: module name (string) -> list of Flag objects that are defined - # by that module. - self.__dict__['__flags_by_module'] = {} - # Dictionary: module id (int) -> list of Flag objects that are defined by - # that module. - self.__dict__['__flags_by_module_id'] = {} - # Dictionary: module name (string) -> list of Flag objects that are - # key for that module. - self.__dict__['__key_flags_by_module'] = {} - - # Set if we should use new style gnu_getopt rather than getopt when parsing - # the args. Only possible with Python 2.3+ - self.UseGnuGetOpt(False) - - def UseGnuGetOpt(self, use_gnu_getopt=True): - """Use GNU-style scanning. Allows mixing of flag and non-flag arguments. - - See http://docs.python.org/library/getopt.html#getopt.gnu_getopt - - Args: - use_gnu_getopt: wether or not to use GNU style scanning. - """ - self.__dict__['__use_gnu_getopt'] = use_gnu_getopt - - def IsGnuGetOpt(self): - return self.__dict__['__use_gnu_getopt'] - - def FlagDict(self): - return self.__dict__['__flags'] - - def FlagsByModuleDict(self): - """Returns the dictionary of module_name -> list of defined flags. - - Returns: - A dictionary. Its keys are module names (strings). Its values - are lists of Flag objects. - """ - return self.__dict__['__flags_by_module'] - - def FlagsByModuleIdDict(self): - """Returns the dictionary of module_id -> list of defined flags. - - Returns: - A dictionary. Its keys are module IDs (ints). Its values - are lists of Flag objects. - """ - return self.__dict__['__flags_by_module_id'] - - def KeyFlagsByModuleDict(self): - """Returns the dictionary of module_name -> list of key flags. - - Returns: - A dictionary. Its keys are module names (strings). Its values - are lists of Flag objects. - """ - return self.__dict__['__key_flags_by_module'] - - def _RegisterFlagByModule(self, module_name, flag): - """Records the module that defines a specific flag. - - We keep track of which flag is defined by which module so that we - can later sort the flags by module. - - Args: - module_name: A string, the name of a Python module. - flag: A Flag object, a flag that is key to the module. - """ - flags_by_module = self.FlagsByModuleDict() - flags_by_module.setdefault(module_name, []).append(flag) - - def _RegisterFlagByModuleId(self, module_id, flag): - """Records the module that defines a specific flag. - - Args: - module_id: An int, the ID of the Python module. - flag: A Flag object, a flag that is key to the module. - """ - flags_by_module_id = self.FlagsByModuleIdDict() - flags_by_module_id.setdefault(module_id, []).append(flag) - - def _RegisterKeyFlagForModule(self, module_name, flag): - """Specifies that a flag is a key flag for a module. - - Args: - module_name: A string, the name of a Python module. - flag: A Flag object, a flag that is key to the module. - """ - key_flags_by_module = self.KeyFlagsByModuleDict() - # The list of key flags for the module named module_name. - key_flags = key_flags_by_module.setdefault(module_name, []) - # Add flag, but avoid duplicates. - if flag not in key_flags: - key_flags.append(flag) - - def _GetFlagsDefinedByModule(self, module): - """Returns the list of flags defined by a module. - - Args: - module: A module object or a module name (a string). - - Returns: - A new list of Flag objects. Caller may update this list as he - wishes: none of those changes will affect the internals of this - FlagValue object. - """ - if not isinstance(module, str): - module = module.__name__ - - return list(self.FlagsByModuleDict().get(module, [])) - - def _GetKeyFlagsForModule(self, module): - """Returns the list of key flags for a module. - - Args: - module: A module object or a module name (a string) - - Returns: - A new list of Flag objects. Caller may update this list as he - wishes: none of those changes will affect the internals of this - FlagValue object. - """ - if not isinstance(module, str): - module = module.__name__ - - # Any flag is a key flag for the module that defined it. NOTE: - # key_flags is a fresh list: we can update it without affecting the - # internals of this FlagValues object. - key_flags = self._GetFlagsDefinedByModule(module) - - # Take into account flags explicitly declared as key for a module. - for flag in self.KeyFlagsByModuleDict().get(module, []): - if flag not in key_flags: - key_flags.append(flag) - return key_flags - - def FindModuleDefiningFlag(self, flagname, default=None): - """Return the name of the module defining this flag, or default. - - Args: - flagname: Name of the flag to lookup. - default: Value to return if flagname is not defined. Defaults - to None. - - Returns: - The name of the module which registered the flag with this name. - If no such module exists (i.e. no flag with this name exists), - we return default. - """ - for module, flags in self.FlagsByModuleDict().iteritems(): - for flag in flags: - if flag.name == flagname or flag.short_name == flagname: - return module - return default - - def FindModuleIdDefiningFlag(self, flagname, default=None): - """Return the ID of the module defining this flag, or default. - - Args: - flagname: Name of the flag to lookup. - default: Value to return if flagname is not defined. Defaults - to None. - - Returns: - The ID of the module which registered the flag with this name. - If no such module exists (i.e. no flag with this name exists), - we return default. - """ - for module_id, flags in self.FlagsByModuleIdDict().iteritems(): - for flag in flags: - if flag.name == flagname or flag.short_name == flagname: - return module_id - return default - - def AppendFlagValues(self, flag_values): - """Appends flags registered in another FlagValues instance. - - Args: - flag_values: registry to copy from - """ - for flag_name, flag in flag_values.FlagDict().iteritems(): - # Each flags with shortname appears here twice (once under its - # normal name, and again with its short name). To prevent - # problems (DuplicateFlagError) with double flag registration, we - # perform a check to make sure that the entry we're looking at is - # for its normal name. - if flag_name == flag.name: - try: - self[flag_name] = flag - except DuplicateFlagError: - raise DuplicateFlagError(flag_name, self, - other_flag_values=flag_values) - - def RemoveFlagValues(self, flag_values): - """Remove flags that were previously appended from another FlagValues. - - Args: - flag_values: registry containing flags to remove. - """ - for flag_name in flag_values.FlagDict(): - self.__delattr__(flag_name) - - def __setitem__(self, name, flag): - """Registers a new flag variable.""" - fl = self.FlagDict() - if not isinstance(flag, Flag): - raise IllegalFlagValue(flag) - if not isinstance(name, type("")): - raise FlagsError("Flag name must be a string") - if len(name) == 0: - raise FlagsError("Flag name cannot be empty") - # If running under pychecker, duplicate keys are likely to be - # defined. Disable check for duplicate keys when pycheck'ing. - if (name in fl and not flag.allow_override and - not fl[name].allow_override and not _RUNNING_PYCHECKER): - module, module_name = _GetCallingModuleObjectAndName() - if (self.FindModuleDefiningFlag(name) == module_name and - id(module) != self.FindModuleIdDefiningFlag(name)): - # If the flag has already been defined by a module with the same name, - # but a different ID, we can stop here because it indicates that the - # module is simply being imported a subsequent time. - return - raise DuplicateFlagError(name, self) - short_name = flag.short_name - if short_name is not None: - if (short_name in fl and not flag.allow_override and - not fl[short_name].allow_override and not _RUNNING_PYCHECKER): - raise DuplicateFlagError(short_name, self) - fl[short_name] = flag - fl[name] = flag - global _exported_flags - _exported_flags[name] = flag - - def __getitem__(self, name): - """Retrieves the Flag object for the flag --name.""" - return self.FlagDict()[name] - - def __getattr__(self, name): - """Retrieves the 'value' attribute of the flag --name.""" - fl = self.FlagDict() - if name not in fl: - raise AttributeError(name) - return fl[name].value - - def __setattr__(self, name, value): - """Sets the 'value' attribute of the flag --name.""" - fl = self.FlagDict() - fl[name].value = value - self._AssertValidators(fl[name].validators) - return value - - def _AssertAllValidators(self): - all_validators = set() - for flag in self.FlagDict().itervalues(): - for validator in flag.validators: - all_validators.add(validator) - self._AssertValidators(all_validators) - - def _AssertValidators(self, validators): - """Assert if all validators in the list are satisfied. - - Asserts validators in the order they were created. - Args: - validators: Iterable(gflags_validators.Validator), validators to be - verified - Raises: - AttributeError: if validators work with a non-existing flag. - IllegalFlagValue: if validation fails for at least one validator - """ - for validator in sorted( - validators, key=lambda validator: validator.insertion_index): - try: - validator.Verify(self) - except gflags_validators.Error, e: - message = validator.PrintFlagsWithValues(self) - raise IllegalFlagValue('%s: %s' % (message, str(e))) - - def _FlagIsRegistered(self, flag_obj): - """Checks whether a Flag object is registered under some name. - - Note: this is non trivial: in addition to its normal name, a flag - may have a short name too. In self.FlagDict(), both the normal and - the short name are mapped to the same flag object. E.g., calling - only "del FLAGS.short_name" is not unregistering the corresponding - Flag object (it is still registered under the longer name). - - Args: - flag_obj: A Flag object. - - Returns: - A boolean: True iff flag_obj is registered under some name. - """ - flag_dict = self.FlagDict() - # Check whether flag_obj is registered under its long name. - name = flag_obj.name - if flag_dict.get(name, None) == flag_obj: - return True - # Check whether flag_obj is registered under its short name. - short_name = flag_obj.short_name - if (short_name is not None and - flag_dict.get(short_name, None) == flag_obj): - return True - # The flag cannot be registered under any other name, so we do not - # need to do a full search through the values of self.FlagDict(). - return False - - def __delattr__(self, flag_name): - """Deletes a previously-defined flag from a flag object. - - This method makes sure we can delete a flag by using - - del flag_values_object. - - E.g., - - gflags.DEFINE_integer('foo', 1, 'Integer flag.') - del gflags.FLAGS.foo - - Args: - flag_name: A string, the name of the flag to be deleted. - - Raises: - AttributeError: When there is no registered flag named flag_name. - """ - fl = self.FlagDict() - if flag_name not in fl: - raise AttributeError(flag_name) - - flag_obj = fl[flag_name] - del fl[flag_name] - - if not self._FlagIsRegistered(flag_obj): - # If the Flag object indicated by flag_name is no longer - # registered (please see the docstring of _FlagIsRegistered), then - # we delete the occurrences of the flag object in all our internal - # dictionaries. - self.__RemoveFlagFromDictByModule(self.FlagsByModuleDict(), flag_obj) - self.__RemoveFlagFromDictByModule(self.FlagsByModuleIdDict(), flag_obj) - self.__RemoveFlagFromDictByModule(self.KeyFlagsByModuleDict(), flag_obj) - - def __RemoveFlagFromDictByModule(self, flags_by_module_dict, flag_obj): - """Removes a flag object from a module -> list of flags dictionary. - - Args: - flags_by_module_dict: A dictionary that maps module names to lists of - flags. - flag_obj: A flag object. - """ - for unused_module, flags_in_module in flags_by_module_dict.iteritems(): - # while (as opposed to if) takes care of multiple occurrences of a - # flag in the list for the same module. - while flag_obj in flags_in_module: - flags_in_module.remove(flag_obj) - - def SetDefault(self, name, value): - """Changes the default value of the named flag object.""" - fl = self.FlagDict() - if name not in fl: - raise AttributeError(name) - fl[name].SetDefault(value) - self._AssertValidators(fl[name].validators) - - def __contains__(self, name): - """Returns True if name is a value (flag) in the dict.""" - return name in self.FlagDict() - - has_key = __contains__ # a synonym for __contains__() - - def __iter__(self): - return iter(self.FlagDict()) - - def __call__(self, argv): - """Parses flags from argv; stores parsed flags into this FlagValues object. - - All unparsed arguments are returned. Flags are parsed using the GNU - Program Argument Syntax Conventions, using getopt: - - http://www.gnu.org/software/libc/manual/html_mono/libc.html#Getopt - - Args: - argv: argument list. Can be of any type that may be converted to a list. - - Returns: - The list of arguments not parsed as options, including argv[0] - - Raises: - FlagsError: on any parsing error - """ - # Support any sequence type that can be converted to a list - argv = list(argv) - - shortopts = "" - longopts = [] - - fl = self.FlagDict() - - # This pre parses the argv list for --flagfile=<> options. - argv = argv[:1] + self.ReadFlagsFromFiles(argv[1:], force_gnu=False) - - # Correct the argv to support the google style of passing boolean - # parameters. Boolean parameters may be passed by using --mybool, - # --nomybool, --mybool=(true|false|1|0). getopt does not support - # having options that may or may not have a parameter. We replace - # instances of the short form --mybool and --nomybool with their - # full forms: --mybool=(true|false). - original_argv = list(argv) # list() makes a copy - shortest_matches = None - for name, flag in fl.items(): - if not flag.boolean: - continue - if shortest_matches is None: - # Determine the smallest allowable prefix for all flag names - shortest_matches = self.ShortestUniquePrefixes(fl) - no_name = 'no' + name - prefix = shortest_matches[name] - no_prefix = shortest_matches[no_name] - - # Replace all occurrences of this boolean with extended forms - for arg_idx in range(1, len(argv)): - arg = argv[arg_idx] - if arg.find('=') >= 0: continue - if arg.startswith('--'+prefix) and ('--'+name).startswith(arg): - argv[arg_idx] = ('--%s=true' % name) - elif arg.startswith('--'+no_prefix) and ('--'+no_name).startswith(arg): - argv[arg_idx] = ('--%s=false' % name) - - # Loop over all of the flags, building up the lists of short options - # and long options that will be passed to getopt. Short options are - # specified as a string of letters, each letter followed by a colon - # if it takes an argument. Long options are stored in an array of - # strings. Each string ends with an '=' if it takes an argument. - for name, flag in fl.items(): - longopts.append(name + "=") - if len(name) == 1: # one-letter option: allow short flag type also - shortopts += name - if not flag.boolean: - shortopts += ":" - - longopts.append('undefok=') - undefok_flags = [] - - # In case --undefok is specified, loop to pick up unrecognized - # options one by one. - unrecognized_opts = [] - args = argv[1:] - while True: - try: - if self.__dict__['__use_gnu_getopt']: - optlist, unparsed_args = getopt.gnu_getopt(args, shortopts, longopts) - else: - optlist, unparsed_args = getopt.getopt(args, shortopts, longopts) - break - except getopt.GetoptError, e: - if not e.opt or e.opt in fl: - # Not an unrecognized option, re-raise the exception as a FlagsError - raise FlagsError(e) - # Remove offender from args and try again - for arg_index in range(len(args)): - if ((args[arg_index] == '--' + e.opt) or - (args[arg_index] == '-' + e.opt) or - (args[arg_index].startswith('--' + e.opt + '='))): - unrecognized_opts.append((e.opt, args[arg_index])) - args = args[0:arg_index] + args[arg_index+1:] - break - else: - # We should have found the option, so we don't expect to get - # here. We could assert, but raising the original exception - # might work better. - raise FlagsError(e) - - for name, arg in optlist: - if name == '--undefok': - flag_names = arg.split(',') - undefok_flags.extend(flag_names) - # For boolean flags, if --undefok=boolflag is specified, then we should - # also accept --noboolflag, in addition to --boolflag. - # Since we don't know the type of the undefok'd flag, this will affect - # non-boolean flags as well. - # NOTE: You shouldn't use --undefok=noboolflag, because then we will - # accept --nonoboolflag here. We are choosing not to do the conversion - # from noboolflag -> boolflag because of the ambiguity that flag names - # can start with 'no'. - undefok_flags.extend('no' + name for name in flag_names) - continue - if name.startswith('--'): - # long option - name = name[2:] - short_option = 0 - else: - # short option - name = name[1:] - short_option = 1 - if name in fl: - flag = fl[name] - if flag.boolean and short_option: arg = 1 - flag.Parse(arg) - - # If there were unrecognized options, raise an exception unless - # the options were named via --undefok. - for opt, value in unrecognized_opts: - if opt not in undefok_flags: - raise UnrecognizedFlagError(opt, value) - - if unparsed_args: - if self.__dict__['__use_gnu_getopt']: - # if using gnu_getopt just return the program name + remainder of argv. - ret_val = argv[:1] + unparsed_args - else: - # unparsed_args becomes the first non-flag detected by getopt to - # the end of argv. Because argv may have been modified above, - # return original_argv for this region. - ret_val = argv[:1] + original_argv[-len(unparsed_args):] - else: - ret_val = argv[:1] - - self._AssertAllValidators() - return ret_val - - def Reset(self): - """Resets the values to the point before FLAGS(argv) was called.""" - for f in self.FlagDict().values(): - f.Unparse() - - def RegisteredFlags(self): - """Returns: a list of the names and short names of all registered flags.""" - return list(self.FlagDict()) - - def FlagValuesDict(self): - """Returns: a dictionary that maps flag names to flag values.""" - flag_values = {} - - for flag_name in self.RegisteredFlags(): - flag = self.FlagDict()[flag_name] - flag_values[flag_name] = flag.value - - return flag_values - - def __str__(self): - """Generates a help string for all known flags.""" - return self.GetHelp() - - def GetHelp(self, prefix=''): - """Generates a help string for all known flags.""" - helplist = [] - - flags_by_module = self.FlagsByModuleDict() - if flags_by_module: - - modules = sorted(flags_by_module) - - # Print the help for the main module first, if possible. - main_module = _GetMainModule() - if main_module in modules: - modules.remove(main_module) - modules = [main_module] + modules - - for module in modules: - self.__RenderOurModuleFlags(module, helplist) - - self.__RenderModuleFlags('gflags', - _SPECIAL_FLAGS.FlagDict().values(), - helplist) - - else: - # Just print one long list of flags. - self.__RenderFlagList( - self.FlagDict().values() + _SPECIAL_FLAGS.FlagDict().values(), - helplist, prefix) - - return '\n'.join(helplist) - - def __RenderModuleFlags(self, module, flags, output_lines, prefix=""): - """Generates a help string for a given module.""" - if not isinstance(module, str): - module = module.__name__ - output_lines.append('\n%s%s:' % (prefix, module)) - self.__RenderFlagList(flags, output_lines, prefix + " ") - - def __RenderOurModuleFlags(self, module, output_lines, prefix=""): - """Generates a help string for a given module.""" - flags = self._GetFlagsDefinedByModule(module) - if flags: - self.__RenderModuleFlags(module, flags, output_lines, prefix) - - def __RenderOurModuleKeyFlags(self, module, output_lines, prefix=""): - """Generates a help string for the key flags of a given module. - - Args: - module: A module object or a module name (a string). - output_lines: A list of strings. The generated help message - lines will be appended to this list. - prefix: A string that is prepended to each generated help line. - """ - key_flags = self._GetKeyFlagsForModule(module) - if key_flags: - self.__RenderModuleFlags(module, key_flags, output_lines, prefix) - - def ModuleHelp(self, module): - """Describe the key flags of a module. - - Args: - module: A module object or a module name (a string). - - Returns: - string describing the key flags of a module. - """ - helplist = [] - self.__RenderOurModuleKeyFlags(module, helplist) - return '\n'.join(helplist) - - def MainModuleHelp(self): - """Describe the key flags of the main module. - - Returns: - string describing the key flags of a module. - """ - return self.ModuleHelp(_GetMainModule()) - - def __RenderFlagList(self, flaglist, output_lines, prefix=" "): - fl = self.FlagDict() - special_fl = _SPECIAL_FLAGS.FlagDict() - flaglist = [(flag.name, flag) for flag in flaglist] - flaglist.sort() - flagset = {} - for (name, flag) in flaglist: - # It's possible this flag got deleted or overridden since being - # registered in the per-module flaglist. Check now against the - # canonical source of current flag information, the FlagDict. - if fl.get(name, None) != flag and special_fl.get(name, None) != flag: - # a different flag is using this name now - continue - # only print help once - if flag in flagset: continue - flagset[flag] = 1 - flaghelp = "" - if flag.short_name: flaghelp += "-%s," % flag.short_name - if flag.boolean: - flaghelp += "--[no]%s" % flag.name + ":" - else: - flaghelp += "--%s" % flag.name + ":" - flaghelp += " " - if flag.help: - flaghelp += flag.help - flaghelp = TextWrap(flaghelp, indent=prefix+" ", - firstline_indent=prefix) - if flag.default_as_str: - flaghelp += "\n" - flaghelp += TextWrap("(default: %s)" % flag.default_as_str, - indent=prefix+" ") - if flag.parser.syntactic_help: - flaghelp += "\n" - flaghelp += TextWrap("(%s)" % flag.parser.syntactic_help, - indent=prefix+" ") - output_lines.append(flaghelp) - - def get(self, name, default): - """Returns the value of a flag (if not None) or a default value. - - Args: - name: A string, the name of a flag. - default: Default value to use if the flag value is None. - """ - - value = self.__getattr__(name) - if value is not None: # Can't do if not value, b/c value might be '0' or "" - return value - else: - return default - - def ShortestUniquePrefixes(self, fl): - """Returns: dictionary; maps flag names to their shortest unique prefix.""" - # Sort the list of flag names - sorted_flags = [] - for name, flag in fl.items(): - sorted_flags.append(name) - if flag.boolean: - sorted_flags.append('no%s' % name) - sorted_flags.sort() - - # For each name in the sorted list, determine the shortest unique - # prefix by comparing itself to the next name and to the previous - # name (the latter check uses cached info from the previous loop). - shortest_matches = {} - prev_idx = 0 - for flag_idx in range(len(sorted_flags)): - curr = sorted_flags[flag_idx] - if flag_idx == (len(sorted_flags) - 1): - next = None - else: - next = sorted_flags[flag_idx+1] - next_len = len(next) - for curr_idx in range(len(curr)): - if (next is None - or curr_idx >= next_len - or curr[curr_idx] != next[curr_idx]): - # curr longer than next or no more chars in common - shortest_matches[curr] = curr[:max(prev_idx, curr_idx) + 1] - prev_idx = curr_idx - break - else: - # curr shorter than (or equal to) next - shortest_matches[curr] = curr - prev_idx = curr_idx + 1 # next will need at least one more char - return shortest_matches - - def __IsFlagFileDirective(self, flag_string): - """Checks whether flag_string contain a --flagfile= directive.""" - if isinstance(flag_string, type("")): - if flag_string.startswith('--flagfile='): - return 1 - elif flag_string == '--flagfile': - return 1 - elif flag_string.startswith('-flagfile='): - return 1 - elif flag_string == '-flagfile': - return 1 - else: - return 0 - return 0 - - def ExtractFilename(self, flagfile_str): - """Returns filename from a flagfile_str of form -[-]flagfile=filename. - - The cases of --flagfile foo and -flagfile foo shouldn't be hitting - this function, as they are dealt with in the level above this - function. - """ - if flagfile_str.startswith('--flagfile='): - return os.path.expanduser((flagfile_str[(len('--flagfile=')):]).strip()) - elif flagfile_str.startswith('-flagfile='): - return os.path.expanduser((flagfile_str[(len('-flagfile=')):]).strip()) - else: - raise FlagsError('Hit illegal --flagfile type: %s' % flagfile_str) - - def __GetFlagFileLines(self, filename, parsed_file_list): - """Returns the useful (!=comments, etc) lines from a file with flags. - - Args: - filename: A string, the name of the flag file. - parsed_file_list: A list of the names of the files we have - already read. MUTATED BY THIS FUNCTION. - - Returns: - List of strings. See the note below. - - NOTE(springer): This function checks for a nested --flagfile= - tag and handles the lower file recursively. It returns a list of - all the lines that _could_ contain command flags. This is - EVERYTHING except whitespace lines and comments (lines starting - with '#' or '//'). - """ - line_list = [] # All line from flagfile. - flag_line_list = [] # Subset of lines w/o comments, blanks, flagfile= tags. - try: - file_obj = open(filename, 'r') - except IOError, e_msg: - raise CantOpenFlagFileError('ERROR:: Unable to open flagfile: %s' % e_msg) - - line_list = file_obj.readlines() - file_obj.close() - parsed_file_list.append(filename) - - # This is where we check each line in the file we just read. - for line in line_list: - if line.isspace(): - pass - # Checks for comment (a line that starts with '#'). - elif line.startswith('#') or line.startswith('//'): - pass - # Checks for a nested "--flagfile=" flag in the current file. - # If we find one, recursively parse down into that file. - elif self.__IsFlagFileDirective(line): - sub_filename = self.ExtractFilename(line) - # We do a little safety check for reparsing a file we've already done. - if not sub_filename in parsed_file_list: - included_flags = self.__GetFlagFileLines(sub_filename, - parsed_file_list) - flag_line_list.extend(included_flags) - else: # Case of hitting a circularly included file. - sys.stderr.write('Warning: Hit circular flagfile dependency: %s\n' % - (sub_filename,)) - else: - # Any line that's not a comment or a nested flagfile should get - # copied into 2nd position. This leaves earlier arguments - # further back in the list, thus giving them higher priority. - flag_line_list.append(line.strip()) - return flag_line_list - - def ReadFlagsFromFiles(self, argv, force_gnu=True): - """Processes command line args, but also allow args to be read from file. - - Args: - argv: A list of strings, usually sys.argv[1:], which may contain one or - more flagfile directives of the form --flagfile="./filename". - Note that the name of the program (sys.argv[0]) should be omitted. - force_gnu: If False, --flagfile parsing obeys normal flag semantics. - If True, --flagfile parsing instead follows gnu_getopt semantics. - *** WARNING *** force_gnu=False may become the future default! - - Returns: - - A new list which has the original list combined with what we read - from any flagfile(s). - - References: Global gflags.FLAG class instance. - - This function should be called before the normal FLAGS(argv) call. - This function scans the input list for a flag that looks like: - --flagfile=. Then it opens , reads all valid key - and value pairs and inserts them into the input list between the - first item of the list and any subsequent items in the list. - - Note that your application's flags are still defined the usual way - using gflags DEFINE_flag() type functions. - - Notes (assuming we're getting a commandline of some sort as our input): - --> Flags from the command line argv _should_ always take precedence! - --> A further "--flagfile=" CAN be nested in a flagfile. - It will be processed after the parent flag file is done. - --> For duplicate flags, first one we hit should "win". - --> In a flagfile, a line beginning with # or // is a comment. - --> Entirely blank lines _should_ be ignored. - """ - parsed_file_list = [] - rest_of_args = argv - new_argv = [] - while rest_of_args: - current_arg = rest_of_args[0] - rest_of_args = rest_of_args[1:] - if self.__IsFlagFileDirective(current_arg): - # This handles the case of -(-)flagfile foo. In this case the - # next arg really is part of this one. - if current_arg == '--flagfile' or current_arg == '-flagfile': - if not rest_of_args: - raise IllegalFlagValue('--flagfile with no argument') - flag_filename = os.path.expanduser(rest_of_args[0]) - rest_of_args = rest_of_args[1:] - else: - # This handles the case of (-)-flagfile=foo. - flag_filename = self.ExtractFilename(current_arg) - new_argv.extend( - self.__GetFlagFileLines(flag_filename, parsed_file_list)) - else: - new_argv.append(current_arg) - # Stop parsing after '--', like getopt and gnu_getopt. - if current_arg == '--': - break - # Stop parsing after a non-flag, like getopt. - if not current_arg.startswith('-'): - if not force_gnu and not self.__dict__['__use_gnu_getopt']: - break - - if rest_of_args: - new_argv.extend(rest_of_args) - - return new_argv - - def FlagsIntoString(self): - """Returns a string with the flags assignments from this FlagValues object. - - This function ignores flags whose value is None. Each flag - assignment is separated by a newline. - - NOTE: MUST mirror the behavior of the C++ CommandlineFlagsIntoString - from http://code.google.com/p/google-gflags - """ - s = '' - for flag in self.FlagDict().values(): - if flag.value is not None: - s += flag.Serialize() + '\n' - return s - - def AppendFlagsIntoFile(self, filename): - """Appends all flags assignments from this FlagInfo object to a file. - - Output will be in the format of a flagfile. - - NOTE: MUST mirror the behavior of the C++ AppendFlagsIntoFile - from http://code.google.com/p/google-gflags - """ - out_file = open(filename, 'a') - out_file.write(self.FlagsIntoString()) - out_file.close() - - def WriteHelpInXMLFormat(self, outfile=None): - """Outputs flag documentation in XML format. - - NOTE: We use element names that are consistent with those used by - the C++ command-line flag library, from - http://code.google.com/p/google-gflags - We also use a few new elements (e.g., ), but we do not - interfere / overlap with existing XML elements used by the C++ - library. Please maintain this consistency. - - Args: - outfile: File object we write to. Default None means sys.stdout. - """ - outfile = outfile or sys.stdout - - outfile.write('\n') - outfile.write('\n') - indent = ' ' - _WriteSimpleXMLElement(outfile, 'program', os.path.basename(sys.argv[0]), - indent) - - usage_doc = sys.modules['__main__'].__doc__ - if not usage_doc: - usage_doc = '\nUSAGE: %s [flags]\n' % sys.argv[0] - else: - usage_doc = usage_doc.replace('%s', sys.argv[0]) - _WriteSimpleXMLElement(outfile, 'usage', usage_doc, indent) - - # Get list of key flags for the main module. - key_flags = self._GetKeyFlagsForModule(_GetMainModule()) - - # Sort flags by declaring module name and next by flag name. - flags_by_module = self.FlagsByModuleDict() - all_module_names = list(flags_by_module.keys()) - all_module_names.sort() - for module_name in all_module_names: - flag_list = [(f.name, f) for f in flags_by_module[module_name]] - flag_list.sort() - for unused_flag_name, flag in flag_list: - is_key = flag in key_flags - flag.WriteInfoInXMLFormat(outfile, module_name, - is_key=is_key, indent=indent) - - outfile.write('\n') - outfile.flush() - - def AddValidator(self, validator): - """Register new flags validator to be checked. - - Args: - validator: gflags_validators.Validator - Raises: - AttributeError: if validators work with a non-existing flag. - """ - for flag_name in validator.GetFlagsNames(): - flag = self.FlagDict()[flag_name] - flag.validators.append(validator) - -# end of FlagValues definition - - -# The global FlagValues instance -FLAGS = FlagValues() - - -def _StrOrUnicode(value): - """Converts value to a python string or, if necessary, unicode-string.""" - try: - return str(value) - except UnicodeEncodeError: - return unicode(value) - - -def _MakeXMLSafe(s): - """Escapes <, >, and & from s, and removes XML 1.0-illegal chars.""" - s = cgi.escape(s) # Escape <, >, and & - # Remove characters that cannot appear in an XML 1.0 document - # (http://www.w3.org/TR/REC-xml/#charsets). - # - # NOTE: if there are problems with current solution, one may move to - # XML 1.1, which allows such chars, if they're entity-escaped (&#xHH;). - s = re.sub(r'[\x00-\x08\x0b\x0c\x0e-\x1f]', '', s) - # Convert non-ascii characters to entities. Note: requires python >=2.3 - s = s.encode('ascii', 'xmlcharrefreplace') # u'\xce\x88' -> 'uΈ' - return s - - -def _WriteSimpleXMLElement(outfile, name, value, indent): - """Writes a simple XML element. - - Args: - outfile: File object we write the XML element to. - name: A string, the name of XML element. - value: A Python object, whose string representation will be used - as the value of the XML element. - indent: A string, prepended to each line of generated output. - """ - value_str = _StrOrUnicode(value) - if isinstance(value, bool): - # Display boolean values as the C++ flag library does: no caps. - value_str = value_str.lower() - safe_value_str = _MakeXMLSafe(value_str) - outfile.write('%s<%s>%s\n' % (indent, name, safe_value_str, name)) - - -class Flag: - """Information about a command-line flag. - - 'Flag' objects define the following fields: - .name - the name for this flag - .default - the default value for this flag - .default_as_str - default value as repr'd string, e.g., "'true'" (or None) - .value - the most recent parsed value of this flag; set by Parse() - .help - a help string or None if no help is available - .short_name - the single letter alias for this flag (or None) - .boolean - if 'true', this flag does not accept arguments - .present - true if this flag was parsed from command line flags. - .parser - an ArgumentParser object - .serializer - an ArgumentSerializer object - .allow_override - the flag may be redefined without raising an error - - The only public method of a 'Flag' object is Parse(), but it is - typically only called by a 'FlagValues' object. The Parse() method is - a thin wrapper around the 'ArgumentParser' Parse() method. The parsed - value is saved in .value, and the .present attribute is updated. If - this flag was already present, a FlagsError is raised. - - Parse() is also called during __init__ to parse the default value and - initialize the .value attribute. This enables other python modules to - safely use flags even if the __main__ module neglects to parse the - command line arguments. The .present attribute is cleared after - __init__ parsing. If the default value is set to None, then the - __init__ parsing step is skipped and the .value attribute is - initialized to None. - - Note: The default value is also presented to the user in the help - string, so it is important that it be a legal value for this flag. - """ - - def __init__(self, parser, serializer, name, default, help_string, - short_name=None, boolean=0, allow_override=0): - self.name = name - - if not help_string: - help_string = '(no help available)' - - self.help = help_string - self.short_name = short_name - self.boolean = boolean - self.present = 0 - self.parser = parser - self.serializer = serializer - self.allow_override = allow_override - self.value = None - self.validators = [] - - self.SetDefault(default) - - def __hash__(self): - return hash(id(self)) - - def __eq__(self, other): - return self is other - - def __lt__(self, other): - if isinstance(other, Flag): - return id(self) < id(other) - return NotImplemented - - def __GetParsedValueAsString(self, value): - if value is None: - return None - if self.serializer: - return repr(self.serializer.Serialize(value)) - if self.boolean: - if value: - return repr('true') - else: - return repr('false') - return repr(_StrOrUnicode(value)) - - def Parse(self, argument): - try: - self.value = self.parser.Parse(argument) - except ValueError, e: # recast ValueError as IllegalFlagValue - raise IllegalFlagValue("flag --%s=%s: %s" % (self.name, argument, e)) - self.present += 1 - - def Unparse(self): - if self.default is None: - self.value = None - else: - self.Parse(self.default) - self.present = 0 - - def Serialize(self): - if self.value is None: - return '' - if self.boolean: - if self.value: - return "--%s" % self.name - else: - return "--no%s" % self.name - else: - if not self.serializer: - raise FlagsError("Serializer not present for flag %s" % self.name) - return "--%s=%s" % (self.name, self.serializer.Serialize(self.value)) - - def SetDefault(self, value): - """Changes the default value (and current value too) for this Flag.""" - # We can't allow a None override because it may end up not being - # passed to C++ code when we're overriding C++ flags. So we - # cowardly bail out until someone fixes the semantics of trying to - # pass None to a C++ flag. See swig_flags.Init() for details on - # this behavior. - # TODO(olexiy): Users can directly call this method, bypassing all flags - # validators (we don't have FlagValues here, so we can not check - # validators). - # The simplest solution I see is to make this method private. - # Another approach would be to store reference to the corresponding - # FlagValues with each flag, but this seems to be an overkill. - if value is None and self.allow_override: - raise DuplicateFlagCannotPropagateNoneToSwig(self.name) - - self.default = value - self.Unparse() - self.default_as_str = self.__GetParsedValueAsString(self.value) - - def Type(self): - """Returns: a string that describes the type of this Flag.""" - # NOTE: we use strings, and not the types.*Type constants because - # our flags can have more exotic types, e.g., 'comma separated list - # of strings', 'whitespace separated list of strings', etc. - return self.parser.Type() - - def WriteInfoInXMLFormat(self, outfile, module_name, is_key=False, indent=''): - """Writes common info about this flag, in XML format. - - This is information that is relevant to all flags (e.g., name, - meaning, etc.). If you defined a flag that has some other pieces of - info, then please override _WriteCustomInfoInXMLFormat. - - Please do NOT override this method. - - Args: - outfile: File object we write to. - module_name: A string, the name of the module that defines this flag. - is_key: A boolean, True iff this flag is key for main module. - indent: A string that is prepended to each generated line. - """ - outfile.write(indent + '\n') - inner_indent = indent + ' ' - if is_key: - _WriteSimpleXMLElement(outfile, 'key', 'yes', inner_indent) - _WriteSimpleXMLElement(outfile, 'file', module_name, inner_indent) - # Print flag features that are relevant for all flags. - _WriteSimpleXMLElement(outfile, 'name', self.name, inner_indent) - if self.short_name: - _WriteSimpleXMLElement(outfile, 'short_name', self.short_name, - inner_indent) - if self.help: - _WriteSimpleXMLElement(outfile, 'meaning', self.help, inner_indent) - # The default flag value can either be represented as a string like on the - # command line, or as a Python object. We serialize this value in the - # latter case in order to remain consistent. - if self.serializer and not isinstance(self.default, str): - default_serialized = self.serializer.Serialize(self.default) - else: - default_serialized = self.default - _WriteSimpleXMLElement(outfile, 'default', default_serialized, inner_indent) - _WriteSimpleXMLElement(outfile, 'current', self.value, inner_indent) - _WriteSimpleXMLElement(outfile, 'type', self.Type(), inner_indent) - # Print extra flag features this flag may have. - self._WriteCustomInfoInXMLFormat(outfile, inner_indent) - outfile.write(indent + '\n') - - def _WriteCustomInfoInXMLFormat(self, outfile, indent): - """Writes extra info about this flag, in XML format. - - "Extra" means "not already printed by WriteInfoInXMLFormat above." - - Args: - outfile: File object we write to. - indent: A string that is prepended to each generated line. - """ - # Usually, the parser knows the extra details about the flag, so - # we just forward the call to it. - self.parser.WriteCustomInfoInXMLFormat(outfile, indent) -# End of Flag definition - - -class _ArgumentParserCache(type): - """Metaclass used to cache and share argument parsers among flags.""" - - _instances = {} - - def __call__(mcs, *args, **kwargs): - """Returns an instance of the argument parser cls. - - This method overrides behavior of the __new__ methods in - all subclasses of ArgumentParser (inclusive). If an instance - for mcs with the same set of arguments exists, this instance is - returned, otherwise a new instance is created. - - If any keyword arguments are defined, or the values in args - are not hashable, this method always returns a new instance of - cls. - - Args: - args: Positional initializer arguments. - kwargs: Initializer keyword arguments. - - Returns: - An instance of cls, shared or new. - """ - if kwargs: - return type.__call__(mcs, *args, **kwargs) - else: - instances = mcs._instances - key = (mcs,) + tuple(args) - try: - return instances[key] - except KeyError: - # No cache entry for key exists, create a new one. - return instances.setdefault(key, type.__call__(mcs, *args)) - except TypeError: - # An object in args cannot be hashed, always return - # a new instance. - return type.__call__(mcs, *args) - - -class ArgumentParser(object): - """Base class used to parse and convert arguments. - - The Parse() method checks to make sure that the string argument is a - legal value and convert it to a native type. If the value cannot be - converted, it should throw a 'ValueError' exception with a human - readable explanation of why the value is illegal. - - Subclasses should also define a syntactic_help string which may be - presented to the user to describe the form of the legal values. - - Argument parser classes must be stateless, since instances are cached - and shared between flags. Initializer arguments are allowed, but all - member variables must be derived from initializer arguments only. - """ - __metaclass__ = _ArgumentParserCache - - syntactic_help = "" - - def Parse(self, argument): - """Default implementation: always returns its argument unmodified.""" - return argument - - def Type(self): - return 'string' - - def WriteCustomInfoInXMLFormat(self, outfile, indent): - pass - - -class ArgumentSerializer: - """Base class for generating string representations of a flag value.""" - - def Serialize(self, value): - return _StrOrUnicode(value) - - -class ListSerializer(ArgumentSerializer): - - def __init__(self, list_sep): - self.list_sep = list_sep - - def Serialize(self, value): - return self.list_sep.join([_StrOrUnicode(x) for x in value]) - - -# Flags validators - - -def RegisterValidator(flag_name, - checker, - message='Flag validation failed', - flag_values=FLAGS): - """Adds a constraint, which will be enforced during program execution. - - The constraint is validated when flags are initially parsed, and after each - change of the corresponding flag's value. - Args: - flag_name: string, name of the flag to be checked. - checker: method to validate the flag. - input - value of the corresponding flag (string, boolean, etc. - This value will be passed to checker by the library). See file's - docstring for examples. - output - Boolean. - Must return True if validator constraint is satisfied. - If constraint is not satisfied, it should either return False or - raise gflags_validators.Error(desired_error_message). - message: error text to be shown to the user if checker returns False. - If checker raises gflags_validators.Error, message from the raised - Error will be shown. - flag_values: FlagValues - Raises: - AttributeError: if flag_name is not registered as a valid flag name. - """ - flag_values.AddValidator(gflags_validators.SimpleValidator(flag_name, - checker, - message)) - - -def MarkFlagAsRequired(flag_name, flag_values=FLAGS): - """Ensure that flag is not None during program execution. - - Registers a flag validator, which will follow usual validator - rules. - Args: - flag_name: string, name of the flag - flag_values: FlagValues - Raises: - AttributeError: if flag_name is not registered as a valid flag name. - """ - RegisterValidator(flag_name, - lambda value: value is not None, - message='Flag --%s must be specified.' % flag_name, - flag_values=flag_values) - - -def _RegisterBoundsValidatorIfNeeded(parser, name, flag_values): - """Enforce lower and upper bounds for numeric flags. - - Args: - parser: NumericParser (either FloatParser or IntegerParser). Provides lower - and upper bounds, and help text to display. - name: string, name of the flag - flag_values: FlagValues - """ - if parser.lower_bound is not None or parser.upper_bound is not None: - - def Checker(value): - if value is not None and parser.IsOutsideBounds(value): - message = '%s is not %s' % (value, parser.syntactic_help) - raise gflags_validators.Error(message) - return True - - RegisterValidator(name, - Checker, - flag_values=flag_values) - - -# The DEFINE functions are explained in mode details in the module doc string. - - -def DEFINE(parser, name, default, help, flag_values=FLAGS, serializer=None, - **args): - """Registers a generic Flag object. - - NOTE: in the docstrings of all DEFINE* functions, "registers" is short - for "creates a new flag and registers it". - - Auxiliary function: clients should use the specialized DEFINE_ - function instead. - - Args: - parser: ArgumentParser that is used to parse the flag arguments. - name: A string, the flag name. - default: The default value of the flag. - help: A help string. - flag_values: FlagValues object the flag will be registered with. - serializer: ArgumentSerializer that serializes the flag value. - args: Dictionary with extra keyword args that are passes to the - Flag __init__. - """ - DEFINE_flag(Flag(parser, serializer, name, default, help, **args), - flag_values) - - -def DEFINE_flag(flag, flag_values=FLAGS): - """Registers a 'Flag' object with a 'FlagValues' object. - - By default, the global FLAGS 'FlagValue' object is used. - - Typical users will use one of the more specialized DEFINE_xxx - functions, such as DEFINE_string or DEFINE_integer. But developers - who need to create Flag objects themselves should use this function - to register their flags. - """ - # copying the reference to flag_values prevents pychecker warnings - fv = flag_values - fv[flag.name] = flag - # Tell flag_values who's defining the flag. - if isinstance(flag_values, FlagValues): - # Regarding the above isinstance test: some users pass funny - # values of flag_values (e.g., {}) in order to avoid the flag - # registration (in the past, there used to be a flag_values == - # FLAGS test here) and redefine flags with the same name (e.g., - # debug). To avoid breaking their code, we perform the - # registration only if flag_values is a real FlagValues object. - module, module_name = _GetCallingModuleObjectAndName() - flag_values._RegisterFlagByModule(module_name, flag) - flag_values._RegisterFlagByModuleId(id(module), flag) - - -def _InternalDeclareKeyFlags(flag_names, - flag_values=FLAGS, key_flag_values=None): - """Declares a flag as key for the calling module. - - Internal function. User code should call DECLARE_key_flag or - ADOPT_module_key_flags instead. - - Args: - flag_names: A list of strings that are names of already-registered - Flag objects. - flag_values: A FlagValues object that the flags listed in - flag_names have registered with (the value of the flag_values - argument from the DEFINE_* calls that defined those flags). - This should almost never need to be overridden. - key_flag_values: A FlagValues object that (among possibly many - other things) keeps track of the key flags for each module. - Default None means "same as flag_values". This should almost - never need to be overridden. - - Raises: - UnrecognizedFlagError: when we refer to a flag that was not - defined yet. - """ - key_flag_values = key_flag_values or flag_values - - module = _GetCallingModule() - - for flag_name in flag_names: - if flag_name not in flag_values: - raise UnrecognizedFlagError(flag_name) - flag = flag_values.FlagDict()[flag_name] - key_flag_values._RegisterKeyFlagForModule(module, flag) - - -def DECLARE_key_flag(flag_name, flag_values=FLAGS): - """Declares one flag as key to the current module. - - Key flags are flags that are deemed really important for a module. - They are important when listing help messages; e.g., if the - --helpshort command-line flag is used, then only the key flags of the - main module are listed (instead of all flags, as in the case of - --help). - - Sample usage: - - gflags.DECLARED_key_flag('flag_1') - - Args: - flag_name: A string, the name of an already declared flag. - (Redeclaring flags as key, including flags implicitly key - because they were declared in this module, is a no-op.) - flag_values: A FlagValues object. This should almost never - need to be overridden. - """ - if flag_name in _SPECIAL_FLAGS: - # Take care of the special flags, e.g., --flagfile, --undefok. - # These flags are defined in _SPECIAL_FLAGS, and are treated - # specially during flag parsing, taking precedence over the - # user-defined flags. - _InternalDeclareKeyFlags([flag_name], - flag_values=_SPECIAL_FLAGS, - key_flag_values=flag_values) - return - _InternalDeclareKeyFlags([flag_name], flag_values=flag_values) - - -def ADOPT_module_key_flags(module, flag_values=FLAGS): - """Declares that all flags key to a module are key to the current module. - - Args: - module: A module object. - flag_values: A FlagValues object. This should almost never need - to be overridden. - - Raises: - FlagsError: When given an argument that is a module name (a - string), instead of a module object. - """ - # NOTE(salcianu): an even better test would be if not - # isinstance(module, types.ModuleType) but I didn't want to import - # types for such a tiny use. - if isinstance(module, str): - raise FlagsError('Received module name %s; expected a module object.' - % module) - _InternalDeclareKeyFlags( - [f.name for f in flag_values._GetKeyFlagsForModule(module.__name__)], - flag_values=flag_values) - # If module is this flag module, take _SPECIAL_FLAGS into account. - if module == _GetThisModuleObjectAndName()[0]: - _InternalDeclareKeyFlags( - # As we associate flags with _GetCallingModuleObjectAndName(), the - # special flags defined in this module are incorrectly registered with - # a different module. So, we can't use _GetKeyFlagsForModule. - # Instead, we take all flags from _SPECIAL_FLAGS (a private - # FlagValues, where no other module should register flags). - [f.name for f in _SPECIAL_FLAGS.FlagDict().values()], - flag_values=_SPECIAL_FLAGS, - key_flag_values=flag_values) - - -# -# STRING FLAGS -# - - -def DEFINE_string(name, default, help, flag_values=FLAGS, **args): - """Registers a flag whose value can be any string.""" - parser = ArgumentParser() - serializer = ArgumentSerializer() - DEFINE(parser, name, default, help, flag_values, serializer, **args) - - -# -# BOOLEAN FLAGS -# - - -class BooleanParser(ArgumentParser): - """Parser of boolean values.""" - - def Convert(self, argument): - """Converts the argument to a boolean; raise ValueError on errors.""" - if type(argument) == str: - if argument.lower() in ['true', 't', '1']: - return True - elif argument.lower() in ['false', 'f', '0']: - return False - - bool_argument = bool(argument) - if argument == bool_argument: - # The argument is a valid boolean (True, False, 0, or 1), and not just - # something that always converts to bool (list, string, int, etc.). - return bool_argument - - raise ValueError('Non-boolean argument to boolean flag', argument) - - def Parse(self, argument): - val = self.Convert(argument) - return val - - def Type(self): - return 'bool' - - -class BooleanFlag(Flag): - """Basic boolean flag. - - Boolean flags do not take any arguments, and their value is either - True (1) or False (0). The false value is specified on the command - line by prepending the word 'no' to either the long or the short flag - name. - - For example, if a Boolean flag was created whose long name was - 'update' and whose short name was 'x', then this flag could be - explicitly unset through either --noupdate or --nox. - """ - - def __init__(self, name, default, help, short_name=None, **args): - p = BooleanParser() - Flag.__init__(self, p, None, name, default, help, short_name, 1, **args) - if not self.help: self.help = "a boolean value" - - -def DEFINE_boolean(name, default, help, flag_values=FLAGS, **args): - """Registers a boolean flag. - - Such a boolean flag does not take an argument. If a user wants to - specify a false value explicitly, the long option beginning with 'no' - must be used: i.e. --noflag - - This flag will have a value of None, True or False. None is possible - if default=None and the user does not specify the flag on the command - line. - """ - DEFINE_flag(BooleanFlag(name, default, help, **args), flag_values) - - -# Match C++ API to unconfuse C++ people. -DEFINE_bool = DEFINE_boolean - - -class HelpFlag(BooleanFlag): - """ - HelpFlag is a special boolean flag that prints usage information and - raises a SystemExit exception if it is ever found in the command - line arguments. Note this is called with allow_override=1, so other - apps can define their own --help flag, replacing this one, if they want. - """ - def __init__(self): - BooleanFlag.__init__(self, "help", 0, "show this help", - short_name="?", allow_override=1) - def Parse(self, arg): - if arg: - doc = sys.modules["__main__"].__doc__ - flags = str(FLAGS) - print doc or ("\nUSAGE: %s [flags]\n" % sys.argv[0]) - if flags: - print "flags:" - print flags - sys.exit(1) -class HelpXMLFlag(BooleanFlag): - """Similar to HelpFlag, but generates output in XML format.""" - def __init__(self): - BooleanFlag.__init__(self, 'helpxml', False, - 'like --help, but generates XML output', - allow_override=1) - def Parse(self, arg): - if arg: - FLAGS.WriteHelpInXMLFormat(sys.stdout) - sys.exit(1) -class HelpshortFlag(BooleanFlag): - """ - HelpshortFlag is a special boolean flag that prints usage - information for the "main" module, and rasies a SystemExit exception - if it is ever found in the command line arguments. Note this is - called with allow_override=1, so other apps can define their own - --helpshort flag, replacing this one, if they want. - """ - def __init__(self): - BooleanFlag.__init__(self, "helpshort", 0, - "show usage only for this module", allow_override=1) - def Parse(self, arg): - if arg: - doc = sys.modules["__main__"].__doc__ - flags = FLAGS.MainModuleHelp() - print doc or ("\nUSAGE: %s [flags]\n" % sys.argv[0]) - if flags: - print "flags:" - print flags - sys.exit(1) - -# -# Numeric parser - base class for Integer and Float parsers -# - - -class NumericParser(ArgumentParser): - """Parser of numeric values. - - Parsed value may be bounded to a given upper and lower bound. - """ - - def IsOutsideBounds(self, val): - return ((self.lower_bound is not None and val < self.lower_bound) or - (self.upper_bound is not None and val > self.upper_bound)) - - def Parse(self, argument): - val = self.Convert(argument) - if self.IsOutsideBounds(val): - raise ValueError("%s is not %s" % (val, self.syntactic_help)) - return val - - def WriteCustomInfoInXMLFormat(self, outfile, indent): - if self.lower_bound is not None: - _WriteSimpleXMLElement(outfile, 'lower_bound', self.lower_bound, indent) - if self.upper_bound is not None: - _WriteSimpleXMLElement(outfile, 'upper_bound', self.upper_bound, indent) - - def Convert(self, argument): - """Default implementation: always returns its argument unmodified.""" - return argument - -# End of Numeric Parser - -# -# FLOAT FLAGS -# - - -class FloatParser(NumericParser): - """Parser of floating point values. - - Parsed value may be bounded to a given upper and lower bound. - """ - number_article = "a" - number_name = "number" - syntactic_help = " ".join((number_article, number_name)) - - def __init__(self, lower_bound=None, upper_bound=None): - super(FloatParser, self).__init__() - self.lower_bound = lower_bound - self.upper_bound = upper_bound - sh = self.syntactic_help - if lower_bound is not None and upper_bound is not None: - sh = ("%s in the range [%s, %s]" % (sh, lower_bound, upper_bound)) - elif lower_bound == 0: - sh = "a non-negative %s" % self.number_name - elif upper_bound == 0: - sh = "a non-positive %s" % self.number_name - elif upper_bound is not None: - sh = "%s <= %s" % (self.number_name, upper_bound) - elif lower_bound is not None: - sh = "%s >= %s" % (self.number_name, lower_bound) - self.syntactic_help = sh - - def Convert(self, argument): - """Converts argument to a float; raises ValueError on errors.""" - return float(argument) - - def Type(self): - return 'float' -# End of FloatParser - - -def DEFINE_float(name, default, help, lower_bound=None, upper_bound=None, - flag_values=FLAGS, **args): - """Registers a flag whose value must be a float. - - If lower_bound or upper_bound are set, then this flag must be - within the given range. - """ - parser = FloatParser(lower_bound, upper_bound) - serializer = ArgumentSerializer() - DEFINE(parser, name, default, help, flag_values, serializer, **args) - _RegisterBoundsValidatorIfNeeded(parser, name, flag_values=flag_values) - -# -# INTEGER FLAGS -# - - -class IntegerParser(NumericParser): - """Parser of an integer value. - - Parsed value may be bounded to a given upper and lower bound. - """ - number_article = "an" - number_name = "integer" - syntactic_help = " ".join((number_article, number_name)) - - def __init__(self, lower_bound=None, upper_bound=None): - super(IntegerParser, self).__init__() - self.lower_bound = lower_bound - self.upper_bound = upper_bound - sh = self.syntactic_help - if lower_bound is not None and upper_bound is not None: - sh = ("%s in the range [%s, %s]" % (sh, lower_bound, upper_bound)) - elif lower_bound == 1: - sh = "a positive %s" % self.number_name - elif upper_bound == -1: - sh = "a negative %s" % self.number_name - elif lower_bound == 0: - sh = "a non-negative %s" % self.number_name - elif upper_bound == 0: - sh = "a non-positive %s" % self.number_name - elif upper_bound is not None: - sh = "%s <= %s" % (self.number_name, upper_bound) - elif lower_bound is not None: - sh = "%s >= %s" % (self.number_name, lower_bound) - self.syntactic_help = sh - - def Convert(self, argument): - __pychecker__ = 'no-returnvalues' - if type(argument) == str: - base = 10 - if len(argument) > 2 and argument[0] == "0" and argument[1] == "x": - base = 16 - return int(argument, base) - else: - return int(argument) - - def Type(self): - return 'int' - - -def DEFINE_integer(name, default, help, lower_bound=None, upper_bound=None, - flag_values=FLAGS, **args): - """Registers a flag whose value must be an integer. - - If lower_bound, or upper_bound are set, then this flag must be - within the given range. - """ - parser = IntegerParser(lower_bound, upper_bound) - serializer = ArgumentSerializer() - DEFINE(parser, name, default, help, flag_values, serializer, **args) - _RegisterBoundsValidatorIfNeeded(parser, name, flag_values=flag_values) - - -# -# ENUM FLAGS -# - - -class EnumParser(ArgumentParser): - """Parser of a string enum value (a string value from a given set). - - If enum_values (see below) is not specified, any string is allowed. - """ - - def __init__(self, enum_values=None): - super(EnumParser, self).__init__() - self.enum_values = enum_values - - def Parse(self, argument): - if self.enum_values and argument not in self.enum_values: - raise ValueError("value should be one of <%s>" % - "|".join(self.enum_values)) - return argument - - def Type(self): - return 'string enum' - - -class EnumFlag(Flag): - """Basic enum flag; its value can be any string from list of enum_values.""" - - def __init__(self, name, default, help, enum_values=None, - short_name=None, **args): - enum_values = enum_values or [] - p = EnumParser(enum_values) - g = ArgumentSerializer() - Flag.__init__(self, p, g, name, default, help, short_name, **args) - if not self.help: self.help = "an enum string" - self.help = "<%s>: %s" % ("|".join(enum_values), self.help) - - def _WriteCustomInfoInXMLFormat(self, outfile, indent): - for enum_value in self.parser.enum_values: - _WriteSimpleXMLElement(outfile, 'enum_value', enum_value, indent) - - -def DEFINE_enum(name, default, enum_values, help, flag_values=FLAGS, - **args): - """Registers a flag whose value can be any string from enum_values.""" - DEFINE_flag(EnumFlag(name, default, help, enum_values, ** args), - flag_values) - - -# -# LIST FLAGS -# - - -class BaseListParser(ArgumentParser): - """Base class for a parser of lists of strings. - - To extend, inherit from this class; from the subclass __init__, call - - BaseListParser.__init__(self, token, name) - - where token is a character used to tokenize, and name is a description - of the separator. - """ - - def __init__(self, token=None, name=None): - assert name - super(BaseListParser, self).__init__() - self._token = token - self._name = name - self.syntactic_help = "a %s separated list" % self._name - - def Parse(self, argument): - if isinstance(argument, list): - return argument - elif argument == '': - return [] - else: - return [s.strip() for s in argument.split(self._token)] - - def Type(self): - return '%s separated list of strings' % self._name - - -class ListParser(BaseListParser): - """Parser for a comma-separated list of strings.""" - - def __init__(self): - BaseListParser.__init__(self, ',', 'comma') - - def WriteCustomInfoInXMLFormat(self, outfile, indent): - BaseListParser.WriteCustomInfoInXMLFormat(self, outfile, indent) - _WriteSimpleXMLElement(outfile, 'list_separator', repr(','), indent) - - -class WhitespaceSeparatedListParser(BaseListParser): - """Parser for a whitespace-separated list of strings.""" - - def __init__(self): - BaseListParser.__init__(self, None, 'whitespace') - - def WriteCustomInfoInXMLFormat(self, outfile, indent): - BaseListParser.WriteCustomInfoInXMLFormat(self, outfile, indent) - separators = list(string.whitespace) - separators.sort() - for ws_char in string.whitespace: - _WriteSimpleXMLElement(outfile, 'list_separator', repr(ws_char), indent) - - -def DEFINE_list(name, default, help, flag_values=FLAGS, **args): - """Registers a flag whose value is a comma-separated list of strings.""" - parser = ListParser() - serializer = ListSerializer(',') - DEFINE(parser, name, default, help, flag_values, serializer, **args) - - -def DEFINE_spaceseplist(name, default, help, flag_values=FLAGS, **args): - """Registers a flag whose value is a whitespace-separated list of strings. - - Any whitespace can be used as a separator. - """ - parser = WhitespaceSeparatedListParser() - serializer = ListSerializer(' ') - DEFINE(parser, name, default, help, flag_values, serializer, **args) - - -# -# MULTI FLAGS -# - - -class MultiFlag(Flag): - """A flag that can appear multiple time on the command-line. - - The value of such a flag is a list that contains the individual values - from all the appearances of that flag on the command-line. - - See the __doc__ for Flag for most behavior of this class. Only - differences in behavior are described here: - - * The default value may be either a single value or a list of values. - A single value is interpreted as the [value] singleton list. - - * The value of the flag is always a list, even if the option was - only supplied once, and even if the default value is a single - value - """ - - def __init__(self, *args, **kwargs): - Flag.__init__(self, *args, **kwargs) - self.help += ';\n repeat this option to specify a list of values' - - def Parse(self, arguments): - """Parses one or more arguments with the installed parser. - - Args: - arguments: a single argument or a list of arguments (typically a - list of default values); a single argument is converted - internally into a list containing one item. - """ - if not isinstance(arguments, list): - # Default value may be a list of values. Most other arguments - # will not be, so convert them into a single-item list to make - # processing simpler below. - arguments = [arguments] - - if self.present: - # keep a backup reference to list of previously supplied option values - values = self.value - else: - # "erase" the defaults with an empty list - values = [] - - for item in arguments: - # have Flag superclass parse argument, overwriting self.value reference - Flag.Parse(self, item) # also increments self.present - values.append(self.value) - - # put list of option values back in the 'value' attribute - self.value = values - - def Serialize(self): - if not self.serializer: - raise FlagsError("Serializer not present for flag %s" % self.name) - if self.value is None: - return '' - - s = '' - - multi_value = self.value - - for self.value in multi_value: - if s: s += ' ' - s += Flag.Serialize(self) - - self.value = multi_value - - return s - - def Type(self): - return 'multi ' + self.parser.Type() - - -def DEFINE_multi(parser, serializer, name, default, help, flag_values=FLAGS, - **args): - """Registers a generic MultiFlag that parses its args with a given parser. - - Auxiliary function. Normal users should NOT use it directly. - - Developers who need to create their own 'Parser' classes for options - which can appear multiple times can call this module function to - register their flags. - """ - DEFINE_flag(MultiFlag(parser, serializer, name, default, help, **args), - flag_values) - - -def DEFINE_multistring(name, default, help, flag_values=FLAGS, **args): - """Registers a flag whose value can be a list of any strings. - - Use the flag on the command line multiple times to place multiple - string values into the list. The 'default' may be a single string - (which will be converted into a single-element list) or a list of - strings. - """ - parser = ArgumentParser() - serializer = ArgumentSerializer() - DEFINE_multi(parser, serializer, name, default, help, flag_values, **args) - - -def DEFINE_multi_int(name, default, help, lower_bound=None, upper_bound=None, - flag_values=FLAGS, **args): - """Registers a flag whose value can be a list of arbitrary integers. - - Use the flag on the command line multiple times to place multiple - integer values into the list. The 'default' may be a single integer - (which will be converted into a single-element list) or a list of - integers. - """ - parser = IntegerParser(lower_bound, upper_bound) - serializer = ArgumentSerializer() - DEFINE_multi(parser, serializer, name, default, help, flag_values, **args) - - -def DEFINE_multi_float(name, default, help, lower_bound=None, upper_bound=None, - flag_values=FLAGS, **args): - """Registers a flag whose value can be a list of arbitrary floats. - - Use the flag on the command line multiple times to place multiple - float values into the list. The 'default' may be a single float - (which will be converted into a single-element list) or a list of - floats. - """ - parser = FloatParser(lower_bound, upper_bound) - serializer = ArgumentSerializer() - DEFINE_multi(parser, serializer, name, default, help, flag_values, **args) - - -# Now register the flags that we want to exist in all applications. -# These are all defined with allow_override=1, so user-apps can use -# these flagnames for their own purposes, if they want. -DEFINE_flag(HelpFlag()) -DEFINE_flag(HelpshortFlag()) -DEFINE_flag(HelpXMLFlag()) - -# Define special flags here so that help may be generated for them. -# NOTE: Please do NOT use _SPECIAL_FLAGS from outside this module. -_SPECIAL_FLAGS = FlagValues() - - -DEFINE_string( - 'flagfile', "", - "Insert flag definitions from the given file into the command line.", - _SPECIAL_FLAGS) - -DEFINE_string( - 'undefok', "", - "comma-separated list of flag names that it is okay to specify " - "on the command line even if the program does not define a flag " - "with that name. IMPORTANT: flags in this list that have " - "arguments MUST use the --flag=value format.", _SPECIAL_FLAGS) diff --git a/tools/gflags/gflags2man.py b/tools/gflags/gflags2man.py deleted file mode 100755 index 3a50f9e19fcf0f..00000000000000 --- a/tools/gflags/gflags2man.py +++ /dev/null @@ -1,544 +0,0 @@ -#!/usr/bin/env python - -# Copyright (c) 2006, Google Inc. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - - -"""gflags2man runs a Google flags base program and generates a man page. - -Run the program, parse the output, and then format that into a man -page. - -Usage: - gflags2man [program] ... -""" - -# TODO(csilvers): work with windows paths (\) as well as unix (/) - -# This may seem a bit of an end run, but it: doesn't bloat flags, can -# support python/java/C++, supports older executables, and can be -# extended to other document formats. -# Inspired by help2man. - - - -import os -import re -import sys -import stat -import time - -import gflags - -_VERSION = '0.1' - - -def _GetDefaultDestDir(): - home = os.environ.get('HOME', '') - homeman = os.path.join(home, 'man', 'man1') - if home and os.path.exists(homeman): - return homeman - else: - return os.environ.get('TMPDIR', '/tmp') - -FLAGS = gflags.FLAGS -gflags.DEFINE_string('dest_dir', _GetDefaultDestDir(), - 'Directory to write resulting manpage to.' - ' Specify \'-\' for stdout') -gflags.DEFINE_string('help_flag', '--help', - 'Option to pass to target program in to get help') -gflags.DEFINE_integer('v', 0, 'verbosity level to use for output') - - -_MIN_VALID_USAGE_MSG = 9 # if fewer lines than this, help is suspect - - -class Logging: - """A super-simple logging class""" - def error(self, msg): print >>sys.stderr, "ERROR: ", msg - def warn(self, msg): print >>sys.stderr, "WARNING: ", msg - def info(self, msg): print msg - def debug(self, msg): self.vlog(1, msg) - def vlog(self, level, msg): - if FLAGS.v >= level: print msg -logging = Logging() -class App: - def usage(self, shorthelp=0): - print >>sys.stderr, __doc__ - print >>sys.stderr, "flags:" - print >>sys.stderr, str(FLAGS) - def run(self): - main(sys.argv) -app = App() - - -def GetRealPath(filename): - """Given an executable filename, find in the PATH or find absolute path. - Args: - filename An executable filename (string) - Returns: - Absolute version of filename. - None if filename could not be found locally, absolutely, or in PATH - """ - if os.path.isabs(filename): # already absolute - return filename - - if filename.startswith('./') or filename.startswith('../'): # relative - return os.path.abspath(filename) - - path = os.getenv('PATH', '') - for directory in path.split(':'): - tryname = os.path.join(directory, filename) - if os.path.exists(tryname): - if not os.path.isabs(directory): # relative directory - return os.path.abspath(tryname) - return tryname - if os.path.exists(filename): - return os.path.abspath(filename) - return None # could not determine - -class Flag(object): - """The information about a single flag.""" - - def __init__(self, flag_desc, help): - """Create the flag object. - Args: - flag_desc The command line forms this could take. (string) - help The help text (string) - """ - self.desc = flag_desc # the command line forms - self.help = help # the help text - self.default = '' # default value - self.tips = '' # parsing/syntax tips - - -class ProgramInfo(object): - """All the information gleaned from running a program with --help.""" - - # Match a module block start, for python scripts --help - # "goopy.logging:" - module_py_re = re.compile(r'(\S.+):$') - # match the start of a flag listing - # " -v,--verbosity: Logging verbosity" - flag_py_re = re.compile(r'\s+(-\S+):\s+(.*)$') - # " (default: '0')" - flag_default_py_re = re.compile(r'\s+\(default:\s+\'(.*)\'\)$') - # " (an integer)" - flag_tips_py_re = re.compile(r'\s+\((.*)\)$') - - # Match a module block start, for c++ programs --help - # "google/base/commandlineflags": - module_c_re = re.compile(r'\s+Flags from (\S.+):$') - # match the start of a flag listing - # " -v,--verbosity: Logging verbosity" - flag_c_re = re.compile(r'\s+(-\S+)\s+(.*)$') - - # Match a module block start, for java programs --help - # "com.google.common.flags" - module_java_re = re.compile(r'\s+Flags for (\S.+):$') - # match the start of a flag listing - # " -v,--verbosity: Logging verbosity" - flag_java_re = re.compile(r'\s+(-\S+)\s+(.*)$') - - def __init__(self, executable): - """Create object with executable. - Args: - executable Program to execute (string) - """ - self.long_name = executable - self.name = os.path.basename(executable) # name - # Get name without extension (PAR files) - (self.short_name, self.ext) = os.path.splitext(self.name) - self.executable = GetRealPath(executable) # name of the program - self.output = [] # output from the program. List of lines. - self.desc = [] # top level description. List of lines - self.modules = {} # { section_name(string), [ flags ] } - self.module_list = [] # list of module names in their original order - self.date = time.localtime(time.time()) # default date info - - def Run(self): - """Run it and collect output. - - Returns: - 1 (true) If everything went well. - 0 (false) If there were problems. - """ - if not self.executable: - logging.error('Could not locate "%s"' % self.long_name) - return 0 - - finfo = os.stat(self.executable) - self.date = time.localtime(finfo[stat.ST_MTIME]) - - logging.info('Running: %s %s &1' - % (self.executable, FLAGS.help_flag)) - # --help output is often routed to stderr, so we combine with stdout. - # Re-direct stdin to /dev/null to encourage programs that - # don't understand --help to exit. - (child_stdin, child_stdout_and_stderr) = os.popen4( - [self.executable, FLAGS.help_flag]) - child_stdin.close() # ' start_line+1 - and '' == self.output[start_line+1].rstrip()): - start_line += 2 - logging.debug('Flags start (python): %s' % line) - return (start_line, 'python') - # SWIG flags just have the module name followed by colon. - if exec_mod_start == line: - logging.debug('Flags start (swig): %s' % line) - return (start_line, 'python') - # C++ flags begin after a blank line and with a constant string - if after_blank and line.startswith(' Flags from '): - logging.debug('Flags start (c): %s' % line) - return (start_line, 'c') - # java flags begin with a constant string - if line == 'where flags are': - logging.debug('Flags start (java): %s' % line) - start_line += 2 # skip "Standard flags:" - return (start_line, 'java') - - logging.debug('Desc: %s' % line) - self.desc.append(line) - after_blank = (line == '') - else: - logging.warn('Never found the start of the flags section for "%s"!' - % self.long_name) - return (-1, '') - - def ParsePythonFlags(self, start_line=0): - """Parse python/swig style flags.""" - modname = None # name of current module - modlist = [] - flag = None - for line_num in range(start_line, len(self.output)): # collect flags - line = self.output[line_num].rstrip() - if not line: # blank - continue - - mobj = self.module_py_re.match(line) - if mobj: # start of a new module - modname = mobj.group(1) - logging.debug('Module: %s' % line) - if flag: - modlist.append(flag) - self.module_list.append(modname) - self.modules.setdefault(modname, []) - modlist = self.modules[modname] - flag = None - continue - - mobj = self.flag_py_re.match(line) - if mobj: # start of a new flag - if flag: - modlist.append(flag) - logging.debug('Flag: %s' % line) - flag = Flag(mobj.group(1), mobj.group(2)) - continue - - if not flag: # continuation of a flag - logging.error('Flag info, but no current flag "%s"' % line) - mobj = self.flag_default_py_re.match(line) - if mobj: # (default: '...') - flag.default = mobj.group(1) - logging.debug('Fdef: %s' % line) - continue - mobj = self.flag_tips_py_re.match(line) - if mobj: # (tips) - flag.tips = mobj.group(1) - logging.debug('Ftip: %s' % line) - continue - if flag and flag.help: - flag.help += line # multiflags tack on an extra line - else: - logging.info('Extra: %s' % line) - if flag: - modlist.append(flag) - - def ParseCFlags(self, start_line=0): - """Parse C style flags.""" - modname = None # name of current module - modlist = [] - flag = None - for line_num in range(start_line, len(self.output)): # collect flags - line = self.output[line_num].rstrip() - if not line: # blank lines terminate flags - if flag: # save last flag - modlist.append(flag) - flag = None - continue - - mobj = self.module_c_re.match(line) - if mobj: # start of a new module - modname = mobj.group(1) - logging.debug('Module: %s' % line) - if flag: - modlist.append(flag) - self.module_list.append(modname) - self.modules.setdefault(modname, []) - modlist = self.modules[modname] - flag = None - continue - - mobj = self.flag_c_re.match(line) - if mobj: # start of a new flag - if flag: # save last flag - modlist.append(flag) - logging.debug('Flag: %s' % line) - flag = Flag(mobj.group(1), mobj.group(2)) - continue - - # append to flag help. type and default are part of the main text - if flag: - flag.help += ' ' + line.strip() - else: - logging.info('Extra: %s' % line) - if flag: - modlist.append(flag) - - def ParseJavaFlags(self, start_line=0): - """Parse Java style flags (com.google.common.flags).""" - # The java flags prints starts with a "Standard flags" "module" - # that doesn't follow the standard module syntax. - modname = 'Standard flags' # name of current module - self.module_list.append(modname) - self.modules.setdefault(modname, []) - modlist = self.modules[modname] - flag = None - - for line_num in range(start_line, len(self.output)): # collect flags - line = self.output[line_num].rstrip() - logging.vlog(2, 'Line: "%s"' % line) - if not line: # blank lines terminate module - if flag: # save last flag - modlist.append(flag) - flag = None - continue - - mobj = self.module_java_re.match(line) - if mobj: # start of a new module - modname = mobj.group(1) - logging.debug('Module: %s' % line) - if flag: - modlist.append(flag) - self.module_list.append(modname) - self.modules.setdefault(modname, []) - modlist = self.modules[modname] - flag = None - continue - - mobj = self.flag_java_re.match(line) - if mobj: # start of a new flag - if flag: # save last flag - modlist.append(flag) - logging.debug('Flag: %s' % line) - flag = Flag(mobj.group(1), mobj.group(2)) - continue - - # append to flag help. type and default are part of the main text - if flag: - flag.help += ' ' + line.strip() - else: - logging.info('Extra: %s' % line) - if flag: - modlist.append(flag) - - def Filter(self): - """Filter parsed data to create derived fields.""" - if not self.desc: - self.short_desc = '' - return - - for i in range(len(self.desc)): # replace full path with name - if self.desc[i].find(self.executable) >= 0: - self.desc[i] = self.desc[i].replace(self.executable, self.name) - - self.short_desc = self.desc[0] - word_list = self.short_desc.split(' ') - all_names = [ self.name, self.short_name, ] - # Since the short_desc is always listed right after the name, - # trim it from the short_desc - while word_list and (word_list[0] in all_names - or word_list[0].lower() in all_names): - del word_list[0] - self.short_desc = '' # signal need to reconstruct - if not self.short_desc and word_list: - self.short_desc = ' '.join(word_list) - - -class GenerateDoc(object): - """Base class to output flags information.""" - - def __init__(self, proginfo, directory='.'): - """Create base object. - Args: - proginfo A ProgramInfo object - directory Directory to write output into - """ - self.info = proginfo - self.dirname = directory - - def Output(self): - """Output all sections of the page.""" - self.Open() - self.Header() - self.Body() - self.Footer() - - def Open(self): raise NotImplementedError # define in subclass - def Header(self): raise NotImplementedError # define in subclass - def Body(self): raise NotImplementedError # define in subclass - def Footer(self): raise NotImplementedError # define in subclass - - -class GenerateMan(GenerateDoc): - """Output a man page.""" - - def __init__(self, proginfo, directory='.'): - """Create base object. - Args: - proginfo A ProgramInfo object - directory Directory to write output into - """ - GenerateDoc.__init__(self, proginfo, directory) - - def Open(self): - if self.dirname == '-': - logging.info('Writing to stdout') - self.fp = sys.stdout - else: - self.file_path = '%s.1' % os.path.join(self.dirname, self.info.name) - logging.info('Writing: %s' % self.file_path) - self.fp = open(self.file_path, 'w') - - def Header(self): - self.fp.write( - '.\\" DO NOT MODIFY THIS FILE! It was generated by gflags2man %s\n' - % _VERSION) - self.fp.write( - '.TH %s "1" "%s" "%s" "User Commands"\n' - % (self.info.name, time.strftime('%x', self.info.date), self.info.name)) - self.fp.write( - '.SH NAME\n%s \\- %s\n' % (self.info.name, self.info.short_desc)) - self.fp.write( - '.SH SYNOPSIS\n.B %s\n[\\fIFLAGS\\fR]...\n' % self.info.name) - - def Body(self): - self.fp.write( - '.SH DESCRIPTION\n.\\" Add any additional description here\n.PP\n') - for ln in self.info.desc: - self.fp.write('%s\n' % ln) - self.fp.write( - '.SH OPTIONS\n') - # This shows flags in the original order - for modname in self.info.module_list: - if modname.find(self.info.executable) >= 0: - mod = modname.replace(self.info.executable, self.info.name) - else: - mod = modname - self.fp.write('\n.P\n.I %s\n' % mod) - for flag in self.info.modules[modname]: - help_string = flag.help - if flag.default or flag.tips: - help_string += '\n.br\n' - if flag.default: - help_string += ' (default: \'%s\')' % flag.default - if flag.tips: - help_string += ' (%s)' % flag.tips - self.fp.write( - '.TP\n%s\n%s\n' % (flag.desc, help_string)) - - def Footer(self): - self.fp.write( - '.SH COPYRIGHT\nCopyright \(co %s Google.\n' - % time.strftime('%Y', self.info.date)) - self.fp.write('Gflags2man created this page from "%s %s" output.\n' - % (self.info.name, FLAGS.help_flag)) - self.fp.write('\nGflags2man was written by Dan Christian. ' - ' Note that the date on this' - ' page is the modification date of %s.\n' % self.info.name) - - -def main(argv): - argv = FLAGS(argv) # handles help as well - if len(argv) <= 1: - app.usage(shorthelp=1) - return 1 - - for arg in argv[1:]: - prog = ProgramInfo(arg) - if not prog.Run(): - continue - prog.Parse() - prog.Filter() - doc = GenerateMan(prog, FLAGS.dest_dir) - doc.Output() - return 0 - -if __name__ == '__main__': - app.run() diff --git a/tools/gflags/gflags_validators.py b/tools/gflags/gflags_validators.py deleted file mode 100755 index d83058d50f0010..00000000000000 --- a/tools/gflags/gflags_validators.py +++ /dev/null @@ -1,187 +0,0 @@ -#!/usr/bin/env python - -# Copyright (c) 2010, Google Inc. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -"""Module to enforce different constraints on flags. - -A validator represents an invariant, enforced over a one or more flags. -See 'FLAGS VALIDATORS' in gflags.py's docstring for a usage manual. -""" - -__author__ = 'olexiy@google.com (Olexiy Oryeshko)' - - -class Error(Exception): - """Thrown If validator constraint is not satisfied.""" - - -class Validator(object): - """Base class for flags validators. - - Users should NOT overload these classes, and use gflags.Register... - methods instead. - """ - - # Used to assign each validator an unique insertion_index - validators_count = 0 - - def __init__(self, checker, message): - """Constructor to create all validators. - - Args: - checker: function to verify the constraint. - Input of this method varies, see SimpleValidator and - DictionaryValidator for a detailed description. - message: string, error message to be shown to the user - """ - self.checker = checker - self.message = message - Validator.validators_count += 1 - # Used to assert validators in the order they were registered (CL/18694236) - self.insertion_index = Validator.validators_count - - def Verify(self, flag_values): - """Verify that constraint is satisfied. - - flags library calls this method to verify Validator's constraint. - Args: - flag_values: gflags.FlagValues, containing all flags - Raises: - Error: if constraint is not satisfied. - """ - param = self._GetInputToCheckerFunction(flag_values) - if not self.checker(param): - raise Error(self.message) - - def GetFlagsNames(self): - """Return the names of the flags checked by this validator. - - Returns: - [string], names of the flags - """ - raise NotImplementedError('This method should be overloaded') - - def PrintFlagsWithValues(self, flag_values): - raise NotImplementedError('This method should be overloaded') - - def _GetInputToCheckerFunction(self, flag_values): - """Given flag values, construct the input to be given to checker. - - Args: - flag_values: gflags.FlagValues, containing all flags. - Returns: - Return type depends on the specific validator. - """ - raise NotImplementedError('This method should be overloaded') - - -class SimpleValidator(Validator): - """Validator behind RegisterValidator() method. - - Validates that a single flag passes its checker function. The checker function - takes the flag value and returns True (if value looks fine) or, if flag value - is not valid, either returns False or raises an Exception.""" - def __init__(self, flag_name, checker, message): - """Constructor. - - Args: - flag_name: string, name of the flag. - checker: function to verify the validator. - input - value of the corresponding flag (string, boolean, etc). - output - Boolean. Must return True if validator constraint is satisfied. - If constraint is not satisfied, it should either return False or - raise Error. - message: string, error message to be shown to the user if validator's - condition is not satisfied - """ - super(SimpleValidator, self).__init__(checker, message) - self.flag_name = flag_name - - def GetFlagsNames(self): - return [self.flag_name] - - def PrintFlagsWithValues(self, flag_values): - return 'flag --%s=%s' % (self.flag_name, flag_values[self.flag_name].value) - - def _GetInputToCheckerFunction(self, flag_values): - """Given flag values, construct the input to be given to checker. - - Args: - flag_values: gflags.FlagValues - Returns: - value of the corresponding flag. - """ - return flag_values[self.flag_name].value - - -class DictionaryValidator(Validator): - """Validator behind RegisterDictionaryValidator method. - - Validates that flag values pass their common checker function. The checker - function takes flag values and returns True (if values look fine) or, - if values are not valid, either returns False or raises an Exception. - """ - def __init__(self, flag_names, checker, message): - """Constructor. - - Args: - flag_names: [string], containing names of the flags used by checker. - checker: function to verify the validator. - input - dictionary, with keys() being flag_names, and value for each - key being the value of the corresponding flag (string, boolean, etc). - output - Boolean. Must return True if validator constraint is satisfied. - If constraint is not satisfied, it should either return False or - raise Error. - message: string, error message to be shown to the user if validator's - condition is not satisfied - """ - super(DictionaryValidator, self).__init__(checker, message) - self.flag_names = flag_names - - def _GetInputToCheckerFunction(self, flag_values): - """Given flag values, construct the input to be given to checker. - - Args: - flag_values: gflags.FlagValues - Returns: - dictionary, with keys() being self.lag_names, and value for each key - being the value of the corresponding flag (string, boolean, etc). - """ - return dict([key, flag_values[key].value] for key in self.flag_names) - - def PrintFlagsWithValues(self, flag_values): - prefix = 'flags ' - flags_with_values = [] - for key in self.flag_names: - flags_with_values.append('%s=%s' % (key, flag_values[key].value)) - return prefix + ', '.join(flags_with_values) - - def GetFlagsNames(self): - return self.flag_names diff --git a/tools/gflags/setup.cfg b/tools/gflags/setup.cfg deleted file mode 100644 index 7f75bb2cb15abd..00000000000000 --- a/tools/gflags/setup.cfg +++ /dev/null @@ -1,4 +0,0 @@ -[egg_info] -tag_build = -tag_date = 0 -tag_svn_revision = 0 diff --git a/tools/gflags/setup.py b/tools/gflags/setup.py deleted file mode 100755 index 573db2d410c8dc..00000000000000 --- a/tools/gflags/setup.py +++ /dev/null @@ -1,44 +0,0 @@ -#!/usr/bin/env python - -# Copyright (c) 2007, Google Inc. -# All rights reserved. -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions are -# met: -# -# * Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# * Redistributions in binary form must reproduce the above -# copyright notice, this list of conditions and the following disclaimer -# in the documentation and/or other materials provided with the -# distribution. -# * Neither the name of Google Inc. nor the names of its -# contributors may be used to endorse or promote products derived from -# this software without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR -# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT -# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, -# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT -# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY -# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - -from setuptools import setup - -setup(name='python-gflags', - version='2.0', - description='Google Commandline Flags Module', - license='BSD', - author='Google Inc. and others', - author_email='google-gflags@googlegroups.com', - url='http://code.google.com/p/python-gflags', - py_modules=["gflags", "gflags_validators"], - data_files=[("bin", ["gflags2man.py"])], - include_package_data=True, - )