wrong info returned when not space between interface name and number from show cdp neighbor

[bouchardh]

ISSUE TYPE

• Bug Report

TEMPLATE USING

Value Required NEIGHBOR (\S+)
Value LOCAL_INTERFACE (\S+\s\S+)
Value CAPABILITY ((?:\w(?:\s(?!\s))?){0,})
Value PLATFORM (\S{2,}\s\S{2,}|\S+)
Value NEIGHBOR_INTERFACE (\S+\s\S+)

Start
^Device.*ID -> CDP

CDP
^${NEIGHBOR}$$
^\s+${LOCAL_INTERFACE}\s+\d+\s+${CAPABILITY}\s+${PLATFORM}\s+${NEIGHBOR_INTERFACE} -> Record
^${NEIGHBOR}\s+${LOCAL_INTERFACE}\s+\d+\s+${CAPABILITY}\s+${PLATFORM}\s+${NEIGHBOR_INTERFACE} -> Record

SAMPLE COMMAND OUTPUT

Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,
D - Remote, C - CVTA, M - Two-port Mac Relay

Device ID Local Intrfce Holdtme Capability Platform Port ID
SEP000000000000 Gig 1/0/16 155 H P IP Phone port 1
AP000000000 Gig 1/0/45 158 T B I AIR-CAP35 Gig 0
AP000000001 Gig 1/0/46 173 T B I AIR-CAP35 Gig 0
WAAS0000000 Gig 1/0/1 138 T OE474 InlinePort 1/1/lan
WAAS0000000 Gig 1/0/40 138 H OE474 Gig 1/0
router.domain.local
Gig 1/0/1 134 R B S CISCO2911 Gig 0/0
SEP000000000001 Gig 1/0/33 152 H P M IP Phone Port 1
SEP000000000002 Gig 1/0/29 173 H P M IP Phone Port 1
SEP000000000003 Gig 1/0/30 160 H P M IP Phone Port 1
SEP000000000004 Gig 1/0/14 169 H P M IP Phone Port 1
SEP000000000005 Gig 1/0/8 140 H P M IP Phone Port 1
SEP000000000006 Gig 1/0/13 135 H P M IP Phone Port 1
SEP000000000007 Gig 1/0/15 164 H P CTS-CODEC eth0
SEP000000000008 Gig 1/0/37 173 H P M IP Phone Port 1
SEP000000000009 Gig 1/0/34 176 H P M IP Phone Port 1
SEP00000000000A Gig 1/0/21 179 H P CTS-CODEC eth0
SEP00000000000B Gig 1/0/35 177 H P M IP Phone Port 1
SEP00000000000C Gig 1/0/24 164 H P M IP Phone Port 1
SEP00000000000D Gig 1/0/9 176 H P M IP Phone Port 1
SEP00000000000E Gig 1/0/17 131 H P M IP Phone Port 1
SEP00000000000F Gig 1/0/20 136 H P M IP Phone Port 1
SEP000000000010 Gig 1/0/36 162 H P M IP Phone Port 1

SUMMARY

For the CTS-CODEC devices, I get the following info:
{'capability': 'H',
'local_interface': 'Gig 1/0/15',
'neighbor': 'SEP000000000007',
'neighbor_interface': 'CTS-CODEC eth0',
'platform': 'P'}

Only the locat interface and neighbor are correct.

STEPS TO REPRODUCE

Using netmiko, send_command('show cdp neigh', use_textfsm=True)
Target is a Cisco Catalyst 2960 with MX300 codec

EXPECTED RESULTS

ACTUAL RESULTS