MicroFPGA v3.1

• Camera module: read-out instead of period
• Camera module: all parameters in us
• Camera module: increased range for pulse and exposure
• Laser module: increased range for duration

The 17bits version comes from the corresponding branch on this repository. Important: note that it doesn't have the increased range for the duration, has it does not fit on the FPGA.

MicroFPGA v3.1-beta

See v3.1-beta pre-release.

The 17 bits device adapter comes from a mufpga/MicroFPGA-mm, branch v3_17bits.

Important: the mojo has a limited FPGA size, and in order to fit the 17 bits servos and the v3.1, the laser duration has been maintained to 16bits instead of 20bits.

MicroFPGA v3

FPGA configuration for the legacy Mojo board, corresponding to MicroFPGA v3. Includes a version with 17 bits servos as well. The device adapters were compiled for Micro-Manager 2.0.0 device API 70.

Note: the 17 bits device adapter comes from a mufpga/MicroFPGA-mm, branch v3_17bits.

MicroFPGA v1.1

Old version of MicroFPGA v1. The FPGA configuration was built using AlchitryLab. The 17 bits version simply accommodates one extra bit for the servo positions. The .dll files are the corresponding Micro-Manager device adapter.

This version corrects the v1 by setting the servo stop delay to 10 sec.

MicroFPGA v1

Old version of MicroFPGA v1. The FPGA configuration was built using AlchitryLab. The 17 bits version simply accommodates one extra bit for the servo positions. The .dll files are the corresponding Micro-Manager device adapter.

Note: the servo stop delay is 2.5 sec only!