Portduino is starting, HWID=1, VFS root at /root/.portduino/default
Setting up Meshtastic on Portduino...
Using /etc/meshtasticd/config.yaml as config file
��@INFO  | ??:??:?? 0

//\ E S H T /\ S T / C

DEBUG | ??:??:?? 0 Filesystem files:
DEBUG | ??:??:?? 0  /. (0 Bytes)
DEBUG | ??:??:?? 0  /prefs/db.proto (564 Bytes)
DEBUG | ??:??:?? 0  /prefs/channels.proto (57 Bytes)
DEBUG | ??:??:?? 0  /prefs/. (0 Bytes)
DEBUG | ??:??:?? 0  /prefs/.. (0 Bytes)
DEBUG | ??:??:?? 0  /.. (0 Bytes)
INFO  | ??:??:?? 0 Using �.r� as I2C device.
INFO  | ??:??:?? 0 Scanning for i2c devices...
INFO  | ??:??:?? 0 Scanning for i2c devices...
DEBUG | ??:??:?? 0 Scanning for i2c devices on port 1
DEBUG | ??:??:?? 0 I2C device found at address 0x77
DEBUG | ??:??:?? 0 Wire.available() = 85
INFO  | ??:??:?? 0 BMP-280 sensor found at address 0x77
INFO  | ??:??:?? 0 1 I2C devices found
DEBUG | ??:??:?? 0 found i2c sensor meshtastic_TelemetrySensorType_BMP280
INFO  | ??:??:?? 0 Meshtastic hwvendor=37, swver=2.3.4.ea61808
INFO  | ??:??:?? 0 Initializing NodeDB
INFO  | ??:??:?? 0 Loading /prefs/db.proto
INFO  | ??:??:?? 0 Loaded saved devicestate version 22, with nodecount: 2
/root/.portduino/default/prefs/config.proto does not exist
INFO  | ??:??:?? 0 No /prefs/config.proto preferences found
INFO  | ??:??:?? 0 Installing default LocalConfig
INFO  | ??:??:?? 0 Setting default channel and radio preferences!
DEBUG | ??:??:?? 0 Expanding short PSK #1
INFO  | ??:??:?? 0 Wanted region 0, using UNSET
/root/.portduino/default/prefs/module.proto does not exist
INFO  | ??:??:?? 0 No /prefs/module.proto preferences found
INFO  | ??:??:?? 0 Installing default ModuleConfig
INFO  | ??:??:?? 0 Loading /prefs/channels.proto
INFO  | ??:??:?? 0 Loaded saved channelFile version 22
/root/.portduino/default/oem/oem.proto does not exist
INFO  | ??:??:?? 0 No /oem/oem.proto preferences found
DEBUG | ??:??:?? 0 cleanupMeshDB purged 0 entries
WARN  | ??:??:?? 0 NOTE! Our desired nodenum 0x1 is invalid or in use, so trying for 0x6b8b456b
DEBUG | ??:??:?? 0 Using nodenum 0x6b8b456b
DEBUG | ??:??:?? 0 Expanding short PSK #1
INFO  | ??:??:?? 0 Wanted region 0, using UNSET
DEBUG | ??:??:?? 0 Set Timezone to GMT0
DEBUG | ??:??:?? 0 Read RTC time as 1712771418
DEBUG | ??:??:?? 0 NeighborInfoModule is disabled
/root/.portduino/default/prefs/cannedConf.proto does not exist
INFO  | ??:??:?? 0 No /prefs/cannedConf.proto preferences found
INFO  | ??:??:?? 0 CannedMessageModule is enabled
DEBUG | ??:??:?? 0 Attempting to activate sx1262 radio on SPI port /dev/spidev0.0
DEBUG | ??:??:?? 0 SX126xInterface(cs=21, irq=16, rst=18, busy=20)
DEBUG | ??:??:?? 0 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO  | ??:??:?? 0 Starting meshradio init...
DEBUG | ??:??:?? 0 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=0, time 231 ms
DEBUG | ??:??:?? 0 (bw=250, sf=11, cr=4/5) packet symLen=8 ms, payloadSize=253, time 2115 ms
INFO  | ??:??:?? 0 Radio freq=906.875, config.lora.frequency_offset=0.000
INFO  | ??:??:?? 0 Set radio: region=UNSET, name=LongFast, config=0, ch=19, power=30
INFO  | ??:??:?? 0 Radio myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 mhz)
INFO  | ??:??:?? 0 Radio myRegion->numChannels: 104 x 250.000kHz
INFO  | ??:??:?? 0 Radio channel_num: 20
INFO  | ??:??:?? 0 Radio frequency: 906.875000
INFO  | ??:??:?? 0 Slot time: 42 msec
INFO  | ??:??:?? 0 Set radio: final power level=22
INFO  | ??:??:?? 10 SX126x init result -2
ERROR | ??:??:?? 10 Failed to find SX1262 radio