Files greater than 2000MB doesn't encode #589
Replies: 7 comments 3 replies
-
can you retry with |
Beta Was this translation helpful? Give feedback.
-
I'm seeing an issue with files > 2Gb as well but it fails during the upload process. |
Beta Was this translation helpful? Give feedback.
-
@chansters does it fail immediately or after some percentage of upload? |
Beta Was this translation helpful? Give feedback.
-
@mgogoulos I've uploaded the same file maybe 4 or 5 times. Here's what I noticed :
However .. on my last attempt at uploading the file, it worked, was transcoded accurately. So no idea what's going on. My server wasn't under load of anything during any of my attempts. |
Beta Was this translation helpful? Give feedback.
-
I had similar issues until I raised the maximum upload size in Nginx. Since then, I've had no problems with files upt o 4.3GiB so far. |
Beta Was this translation helpful? Give feedback.
-
Did observe both issues a) large files upload failed b) encoding issues. here are some of my findings hopefully helpful: a) large files upload failed (currently I ignore it)
b) encoding issues (replaced ffmpeg and working fine now)
If I get time I look at the upload issue, would rather like to see native CPU transcode support in the profiles since using it natively in ffmpeg results in a 10x performance boost with very little utilisation. |
Beta Was this translation helpful? Give feedback.
-
Same here, same problem like @chansters log: `/home/mediacms.io/mediacms# tail -f logs/* ==> logs/celery_long.log <== [2024-08-27 13:48:50,326: INFO/MainProcess] mingle: searching for neighbors ==> logs/celery_short.log <== [2024-08-27 13:48:48,513: INFO/MainProcess] mingle: searching for neighbors ==> logs/debug.log <== ==> logs/errorlog.txt <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== ==> logs/celery_short.log <== ==> logs/celery_long.log <== |
Beta Was this translation helpful? Give feedback.
-
Files greater than 2000MB get an error when encoding.
Just tried to upload some files greater than than 2000MB. Any encoding profile of h264 ends with errors. The link of the view/media page stands on 'Media encoding is pending'. System is a intel celeron(4core / 16GB ram / 1TB hd) with debian bullseye. Installed in a docker container.
Here is a example of a log on a 720 h264. Taken from site/admin/files/encoding/180/change/:
But in
mediacms/logs/celery_long.log
everything is ok.Beta Was this translation helpful? Give feedback.
All reactions