example.yaml

points:
  key:
    padding: cy
    footprints:
      choc:
        type: choc
        nets:
          from: =name
          to: GND
        params:
          keycaps: true
          reverse: true
      diode:
        type: diode
        params:
          tracks: true
        nets:
          from: =name
          to: unknown
        anchor:
          shift: [0, -5]

  zones:
    matrix:
      columns:
        outer:
        pinky:
          stagger: 2
        ring:
          stagger: 4
        middle:
          stagger: 3
        index:
          stagger: -2
        inner:
          stagger: -2
      rows:
        bottom:
        home:
        top:
    thumbfan:
      anchor:
        ref: matrix_inner_bottom
        shift: [-25, -20]
      columns:
        near:
        home:
          spread: cx+4
          stagger: -4
          rotate: -20
        far:
          spread: cx+4
          stagger: -4
          rotate: -20
      rows:
        thumb:

outlines:
  exports:
    keys:
      - type: keys
        side: left
        size: 18
    plate:
      - type: keys
        side: left
        size: 25
        corner: 4
    promicro_mounts:
      - type: rectangle
        anchor:
          - ref: matrix_middle_top
            shift: [0, (cy/2) + 4 ]
            rotate: 270
        size: [82,70]
        corner: 4
    merged:
      - type: outline # keys
        name: plate
      - type: outline
        name: promicro_mounts
        operation: add

    pcb_edgecut:
      - type: outline
        name: merged

cases:

# VIA footprints may be needed to jump between layers to avoid obstacles
# Use Blackpill controller to avoid having to leverage a diode matrix
# Potential for support MakerDiary m.2 bluetooth adapter https://wiki.makerdiary.com/nrf52840-m2
# USB-C Controller
# TRRS between halves
# Ability to make either halve master/slave pair
# Support for millmax hotswap sockets
# Support for Kailh hotswap sockets (default support in ergogen)
# Support for sk6812mini-e.js leds for easier soldering
# Support for Roller encoder, 1/side (EVQWGD001) (default support in ergogen)
# Support for Nice!View
pcbs:
  cholatte:
    outlines:
      pcb_outline_name:
        outline: pcb_edgecut
    footprints:
      - type: rotary
        anchor:
          - ref: matrix_inner_bottom
            shift: [20, -14]
            rotate: -32
        nets:
          to: undefined
          from: undefined
          A: undefined
          B: GND
          C: undefined

      - type: trrs
        anchor:
          - ref: matrix_inner_bottom
            shift: [34, 5]
            rotate: -90
        nets:
          A: GND
          B: GND
          C: D2
          D: VCC

      - type: oled # 4 pin oled; need to find 5pin footprint
        anchor:
          - ref: matrix_inner_top
            shift: [50, 0]
            rotate: 90
        nets:
          SDA: undefined,
          SCL: undefined,
          VCC: undefined,
          GND: undefined,

      - type: promicro
        anchor:
          - ref: matrix_inner_home
            shift: [25, 12]
            rotate: -90
        nets:
          P1: matrix_outer_bottom
          P2: matrix_outer_home
          P3: matrix_outer_top
          P4: matrix_pinky_bottom
          P5: matrix_pinky_home
          P6: matrix_pinky_top
          P7: matrix_ring_bottom
          P8: matrix_ring_home
          P9: matrix_ring_top
          P10: matrix_middle_bottom
          P11: matrix_middle_home
          P12: matrix_middle_top
          P13: matrix_index_bottom
          P14: matrix_index_home
          P15: matrix_index_top
          P16: matrix_inner_bottom
          P17: matrix_inner_home
          P18: matrix_inner_top
          P19: matrix_thumbfan_near
          P20: matrix_thumbfan_home
          P21: matrix_thumbfan_far