Skip to content

Latest commit

 

History

History
240 lines (168 loc) · 7.79 KB

LOCAL_TESTING.md

File metadata and controls

240 lines (168 loc) · 7.79 KB
Raw

ZetaChain Localnet Development & Testing Environment

ZetaChain localnet development and testing environment is divided into three different directories:

  • localnet: a set of Docker images and script for spinning up a localnet.
  • e2e: a set of Go packages for end-to-end testing between ZetaChain and other blockchains.
  • zetae2e: a CLI tool using e2e for running end-to-end tests.

A description of each directory is provided in the respective README files.

Running E2E tests

Build zetanode

$ make zetanode

This Makefile rule builds the zetanode image. Rebuild if zetacored/zetaclientd code is updated.

$ docker build -t zetanode .

Run e2e tests

Now we have built all the docker images, we can run the e2e test with make command:

make start-e2e-test

This uses docker compose to start the localnet and run standard e2e tests inside the orchestrator container. There are several parameters that the Makefile can provide to docker compose via environment variables:

  • LOCALNET_MODE
    • setup-only: only setup the localnet, do not run the e2e tests
    • upgrade: run the upgrade tests
    • unset: run the e2e tests
  • E2E_ARGS: arguments to provide to the zetae2e local command
  • UPGRADE_HEIGHT: block height to upgrade at when LOCALNET_MODE=upgrade
  • ZETACORED_IMPORT_GENESIS_DATA: path to genesis data to import before starting zetacored
  • ZETACORED_START_PERIOD: duration to tolerate zetacored health check failures during startup

Run admin functions e2e tests

We define e2e tests allowing to test admin functionalities (emergency network pause for example). Since these tests interact with the network functionalities, these can't be run concurrently with the regular e2e tests. Moreover, these tests test scoped functionalities of the protocol, and won't be tested in the same pipeline as the regular e2e tests. Therefore, we provide a separate command to run e2e admin functions tests:

make start-e2e-admin-test

Run upgrade tests

Upgrade tests run the E2E tests with an older version, upgrade the nodes to the new version, and run the E2E tests again. This allows testing the upgrade process with a populated state.

Before running the upgrade tests, the old version must be specified the Makefile.

NOTE: We only specify the major version for NEW_VERSION since we use major version only for chain upgrade. Semver is needed for OLD_VERSION because we use this value to fetch the release tag from the GitHub repository.

The upgrade tests can be run with the following command:

make start-upgrade-test

The test the upgrade script faster a light version of the upgrade test can be run with the following command:

make start-upgrade-test-light

This command will run the upgrade test with a lower height and will not populate the state.

Run stress tests

Stress tests run the E2E tests with a larger number of nodes and clients to test the performance of the network. It also stresses the network by sending a large number of cross-chain transactions.

The stress tests can be run with the following command:

make start-stress-test

Test logs

For all tests, the most straightforward logs to observe are the orchestrator logs. If everything works fine, it should finish without panic.

The logs can be observed with the following command:

# in node/contrib/localnet/orchestrator
$ docker logs -f orchestrator

Stop tests

To stop the tests,

make stop-localnet

Run monitoring setup

Before starting the monitoring setup, make sure the Zetacore API is up at http://localhost:1317. You can also add any additional ETH addresses to monitor in zeta-node/contrib/localnet/grafana/addresses.txt file

make start-monitoring

Grafana credentials and dashboards

The Grafana default credentials are admin:admin. The dashboards are located at http://localhost:3000.

Stop monitoring setup

make stop-monitoring

Interacting with the Localnet

In addition to running automated tests, you can also interact with the localnet directly for more specific testing.

The localnet can be started without running tests with the following command:

make start-localnet

The localnet takes a few minutes to start. Printing the logs of the orchestrator will show when the localnet is ready. Once setup, it will display:

✅ the localnet has been setup

Interaction with ZetaChain

ZetaChain The user can connect to the zetacore0 and directly use the node CLI with the zetacored binary with a funded account:

The account is named operator in the keyring and has the address: zeta1amcsn7ja3608dj74xt93pcu5guffsyu2xfdcyp

docker exec -it zetacore0 sh

Performing a query:

zetacored q bank balances zeta1amcsn7ja3608dj74xt93pcu5guffsyu2xfdcyp

Sending a transaction:

zetacored tx bank send operator zeta172uf5cwptuhllf6n4qsncd9v6xh59waxnu83kq 5000azeta --from operator --fees 2000000000000000azeta

Interaction with EVM

The user can interact with the local Ethereum node with the exposed RPC on http://0.0.0.0:8545. The following testing account is funded:

Address: 0xE5C5367B8224807Ac2207d350E60e1b6F27a7ecC
Private key: d87baf7bf6dc560a252596678c12e41f7d1682837f05b29d411bc3f78ae2c263

Examples with the cast CLI:

cast balance 0xE5C5367B8224807Ac2207d350E60e1b6F27a7ecC --rpc-url http://0.0.0.0:8545
98897999997945970464

cast send 0x9fd96203f7b22bCF72d9DCb40ff98302376cE09c --value 42 --rpc-url http://0.0.0.0:8545 --private-key "d87baf7bf6dc560a252596678c12e41f7d1682837f05b29d411bc3f78ae2c263"

Interaction using zetae2e

zetae2e CLI can also be used to interact with the localnet and test specific functionalities with the run command. The local config can be used to interact with the network.

For local interactions, the Bitcoin account is not automatically setup. To set it up, the following command can be used:

zetae2e setup-bitcoin cmd/zetae2e/config/local.yml

The balances on the localnet can be checked with the following command:

zetae2e balances cmd/zetae2e/config/local.yml

Example of run command:

zetae2e run zeta_deposit:2000000000000000000 eth_deposit:2000000000000000000 erc20_deposit:200000 --config cmd/zetae2e/config/local.yml

Useful data

  • TSS Address (on ETH): 0xF421292cb0d3c97b90EEEADfcD660B893592c6A2

Add more e2e tests

The e2e tests are located in the e2e/e2etests package. New tests can be added. The process:

  1. Add a new test file in the e2e/e2etests package, the test_ prefix should be used for the file name.
  2. Implement a method that satisfies the interface:
type E2ETestFunc func(*E2ERunner)
  1. Add the test to list in the e2e/e2etests/e2etests.go file.

The test can interact with the different networks using the runned object:

type E2ERunner struct {
	ZEVMClient   *ethclient.Client
	EVMClient *ethclient.Client
	BtcRPCClient *rpcclient.Client

	CctxClient     crosschaintypes.QueryClient
	FungibleClient fungibletypes.QueryClient
	AuthClient     authtypes.QueryClient
	BankClient     banktypes.QueryClient
	ObserverClient observertypes.QueryClient
	ZetaTxServer   txserver.ZetaTxServer
	
	EVMAuth *bind.TransactOpts
	ZEVMAuth   *bind.TransactOpts
	
	// ...
}

Localnet Governance Proposals

Localnet can be used for testing the creation and execution of governance propoosals.

Exec into the zetacored0 docker container and run the script to automatically generate proposals in a variety of states and then extends the voting window to one hour, allowing you time to view a proposal in a pending state.

docker exec -it zetacore0 bash
/root/test-gov-proposals.sh