Run fakeroute

fakeroute emulates topologies that you can "probe" by performing traceroute measurements. By default, `fakeroutè propose some samples using the following targets IPs (see here):

• in IPv4: 1.1.1.1, 1.1.1.2, 1.1.1.3, 1.1.1.4, 1.1.1.5
• in IPv6: 2001:db8:85a3::8a2e:370:7338

IPv4

1. If your primary network interface (let say eth0) has no IPv4 address, you cannot route the fakeroute destinations. In our samples, each nodes belong to 1.1.1.0/24, so you may run as root:

ifconfig eth0:1 1.1.1.28/24

2. Then run fakeroute as root:

cd ~/git/fakeroute/
./fakeroute/fakeroute -4

You should see something like this:

I: Handling IPv4 probe packets...
   [                          1.1.1.4 ] Weird load balancer
   [                          1.1.1.1 ] Simple asymmetric load balancer
   [                          1.1.1.2 ] Simple load balancer
   [                          1.1.1.3 ] Two-levels simple load balancers
I: Adding iptables rules for handled destinations (see "iptables -nL" and "ip6tables -nL")
I: Running...

To simulate random load-balancing, fakeroute uses a random number generator. By default, the generator will be seeded with current linux time. If you would like to define your own seed, add the option --seed SEED.

./fakeroute/fakeroute -4 --seed 123

3. Run a traceroute measurement toward one of these destinations:

paris-traceroute 1.1.1.1

4. Press ctrl-c to stop fakeroute.

IPv6

1. If your primary network interface (let say eth0) has no IPv6 address, you cannot route the fakeroute destinations. In our samples each nodes belong to 2001:0db8:85a3:0000:0000:8a2e:0370:7330/64, so you may run as root:

ifconfig eth0 inet6 add 2001:0db8:85a3:0000:0000:8a2e:0370:7330/64

2. Run fakeroute as root:

cd ~/git/fakeroute/
./fakeroute/fakeroute -6

You should see something like this:

I: Handling IPv6 prove packets...
   [     2001:db8:85a3::8a2e:370:7338 ] IPv6 test
I: Adding iptables rules for handled destinations (see "iptables -nL" and "ip6tables -nL")
I: Running...

To simulate random load-balancing, fakeroute uses a random number generator. By default, the generator will be seeded with current linux time. If you would like to define your own seed, add the option [--seed seed].

./fakeroute/fakeroute -6 --seed 123

3. Run a traceroute measurement toward this destination:

traceroute6 2001:db8:85a3::8a2e:370:7338

4. Press ctrl-c to stop fakeroute.