since 20181004 NeoPixel SK6812/WS2812B pixel errors (2.4.1 vs 2.4.2) #1882
Labels
Category: Build
Related to building/IDE/releases
Category: Plugin
Related to supported sensors
Category: Stabiliy
Things that work, but not as long as desired
If you self compile, please state this and PLEASE try to ONLY REPORT ISSUES WITH OFFICIAL BUILDS!
Summarize of the problem/feature request
I use a precompiled version: ESPEasy_mega_20181004_test_ESP8266_4096_VCC.
Since this version, there are problems with my Neopixel strip (SK6812 at GPIO 0) with the Plugin38.
Some LEDs light up in an uncontrolled manner. When change the color or brightness, most pixels are ok, but some are faulty. The number and colors of the wrongly lit LED's changes. Possibly, faulty timing caused by going back from Core 2.4.2 to 2.4.1?
Expected behavior
Actual behavior
Steps to reproduce
System configuration
Hardware: NodeMCU V1.0, 4M Flash. NeoPixel strip with SK6812 LED's (40 Pixels in use)
Power Supply 5V/5A, 1000uF Elko directly on strip supply wires
ESP Easy version: ESPEasy_mega_20181004_test_ESP8266_4096_VCC
ESP Easy settings/screenshots:
Rules or log data
The text was updated successfully, but these errors were encountered: