In automatic mode, Bootiso should only select thumb drives and exclude external hard drives #24
Comments
|
Listing USB devices available in your system: |
|
@HassanMirza01 OK ! Would you mind checking where we can get this information ? |
|
sure... i have to get a log for that... downloading kali linux and will burn it with rufus, will tell whats different in external hdd and normal usb,,,, actually i can't risk 2TB data loss in anyway, so am resisting to check it via any script... will check with udev comamands etc... will reply when i got that ;) |
|
FIXED!! You can cherry-pick it ;) One more thing... i think i got the MultiBoot thing working in one mode yet... :D |
|
@HassanMirza01 That's very cool ! Thanks. I'll add an "exclude non-thumb drives" policy by default in next release thanks to your findings. Along with an |
jsamr
changed the title
|
bro, got one more issue... i prefer rsync method instead of dd, may be thats why i get most of the issues... i use dd method on latest kali linux and it worked fine, it created 2 partitions, one for mbr and syslinux files nd other with kali linux data files... but when i did same with rsync, it made it fine, and even my PC gets it booted but while installing, i saw just debian like stuff only, that was not kali linux, it says mount cd failed, it stuck there... but with dd, same iso booted and installed fine... whats that ?? splash was of kali linux... am sending you the output of program and files screenshot in a moment... |
hassanmirza01@bionic:~$ ./bootiso --mrsync '/home/hassanmirza01/Downloads/kali-linux-rolling-amd64.iso'
bootiso: UEFI boot check validated. Your USB will work with UEFI boot.
bootiso: Found SYSLINUX config file and binary at version 6.03.
bootiso: A SYSLINUX booloader will be installed on your USB.
bootiso: Partition label automatically set to `KALI LIVE'.
You can explicitly set label with `-L, --label' option.
bootiso: Listing drives available in your system:
NAME MODEL VENDOR SIZE TRAN HOTPLUG SERIAL
sdb Transcend 8GB JetFlash 7.6G usb 1 026HATT95ZEEN9E2
bootiso: Autoselecting `sdb' (only USB device candidate)
bootiso: The selected device `/dev/sdb' is connected through USB.
bootiso: Created ISO mount point at `/mnt/iso.9Bv'.
bootiso: About to wipe out the content of device `/dev/sdb'.
Are you sure you want to proceed? (y/n)>y
bootiso: Erasing contents of `/dev/sdb'...
bootiso: Creating MBR partition table with `sfdisk' v2.31...
Checking that no-one is using this disk right now ... OK
Disk /dev/sdb: 7.6 GiB, 8103395328 bytes, 15826944 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
>>> Created a new DOS disklabel with disk identifier 0x5f0fcab8.
/dev/sdb1: Created a new partition 1 of type 'W95 FAT32 (LBA)' and of size 7.6 GiB.
/dev/sdb2: Done.
New situation:
Disklabel type: dos
Disk identifier: 0x5f0fcab8
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 15826943 15824896 7.6G c W95 FAT32 (LBA)
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
bootiso: Creating vfat partition on `/dev/sdb1'...
mkfs.fat 4.1 (2017-01-24)
/dev/sdb1 has 250 heads and 62 sectors per track,
hidden sectors 0x0800;
logical sector size is 512,
using 0xf8 media descriptor, with 15824896 sectors;
drive number 0x80;
filesystem has 2 32-bit FATs and 8 sectors per cluster.
FAT size is 15424 sectors, and provides 1974252 clusters.
There are 32 reserved sectors.
Volume ID is 98ff0541, volume label KALI LIVE .
bootiso: Created USB device mount point at `/mnt/usb.6Lo'
bootiso: Copying files from ISO to USB device with `rsync'
bootiso: Synchronizing writes on device `/dev/sdb'
bootiso: Found ISOLINUX config file at `/mnt/usb.6Lo/isolinux/isolinux.cfg'.
Moving to `/mnt/usb.6Lo/isolinux/syslinux.cfg'.
bootiso: Found local SYSLINUX version `6.03'
bootiso: ISO SYSLINUX version matches local version.
bootiso: Installing SYSLINUX bootloader in `/mnt/usb.6Lo/isolinux' with local version `6.03'...
bootiso: C32 BIOS modules successfully installed.
/mnt/usb.6Lo/isolinux is device /dev/sdb1
bootiso: Successfully installed SYSLINUX bootloader at version `6.03'.
bootiso: Succesfully installed Master Boot Record program.
bootiso: Took 628 seconds to perform [install-mount-rsync] action.
bootiso: ISO succesfully unmounted (/mnt/iso.9Bv).
bootiso: USB device partition succesfully unmounted.
bootiso: USB device succesfully ejected.
You can safely remove it!
hassanmirza01@bionic:~$
Thats full program... and tree of files it copied on usb... |
|
@HassanMirza01 |
|
Well... These all issues came with mbr only... Gpt seems working fine for me... I once tried to find a way to extract iso1 and iso2 separately and rsync them accordingly but didnot found any... I know fdisk can show iso info but how can i extract both ?? Archive manager shows all files in 1 i guess ?? |
|
Good news, not issue :) |
|
@HassanMirza01 The trick is that to have access to the second+ partitions, you must mount them with To find the good offset value, you multiply the first partition sector (5734400) with sector size (512). |
|
Actually i tried both dd and rsync methods with GPT while installing my main OS as my machine is GPT schemed... I thought mbr gonna be same and i just settled it.. then i had to install an OS on my 2nd PC, which is MBR, i used rsync method but then i report to you, actually with DD on GPT, it still write one partition and even i didn't needed to set the partition with boot flag, it works fine with GPT as efi files are present in cd or 2nd partition of big size, first small partition contains only mbr related files AFAIK... |
|
@dpserver Thanks a lot for the info! I'm glad it gets shipped in a distro ;-) |
|
Haha, if something working fine, i dont even want to understand iy :D but i know the basics like its been 12years am using Computers... Started when windows 98 was there... DD is good choice and now i got another idea of getring it... Why i want rsync is due to availability of additional disk space, i will make like a partition sdb1 of about 10gb out of 16gb, and will install dd on 4gb space (14-10)gb... Hows the idea ?? |
|
@HassanMirza01 You should be able to create a new partition with the whole remaining space after DD has occurred. |
|
Actually am running my own script which follow stuff like yours, but am using sgdisk for zapping and like that, not a fan of arguments things so am using what i prefer, if thats possible, i will do it with parted, i prefer parted as cli of gparted... |
|
@HassanMirza01 |
|
not an issue for me... actually i decided to release my tool but when i saw yours, i thought there is already a good one there so i should support that as i never found a valid working script when it comes to burn iso, i always turn on windows(dual boot) to use rufus.. i then decided to make my own, and Yes, parted supports both gpt and mbr, it can make partitions, tables, labels, everything, am using all its commands, just do parted -s $devicename mktable msdos/gpt and it will create table scheme on a wiped disk... its all in one tool man, hope so you have used GParted tool, it can do all stuff which gparted can do.... i have extracted commands from gparted too, like formatting in ext4,ext3, ext2,ntfs,exfat,f2fs, and integrated stuff in my tool... now am gonna add Zenity in it so i dont have to drag and drop iso on terminal when it ask to provide iso... |
|
@HassanMirza01 Thanks for your suggestion and commit ; @SibrenVasse has integrated this in |
|
For your information, this feature has been abandoned. The reason is that the information returned by |
i saw once in rufus log that it detects somehow with some digits (i will check it again how) that if a usb is hdd or not, if its hdd, it wont use or name that drive, but i just saw that bootiso showing me the external hdd as usb device and it wont resist in formatting it, its 2TB Data, i suggest to add a check in selectDrive to see difference in udev properties of a external hdd and normal usb...
The text was updated successfully, but these errors were encountered: