Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

MQTT setzt aus #373

Closed
ESP2000 opened this issue Oct 25, 2021 · 6 comments
Closed

MQTT setzt aus #373

ESP2000 opened this issue Oct 25, 2021 · 6 comments

Comments

@ESP2000
Copy link

ESP2000 commented Oct 25, 2021

Hallo...,

nutze das System für die Erfassung Wasserverbrauch, finde die Lösung toll. Habe das Problem, dass die MQTT Übertragung immer wieder für längere Zeit 2-4 Stunden unterbrochen ist. WLAN Verbindung ist stabil, der Zugriff auf das WEB-Interface ist auch möglich, wenn keine MQTT Daten gesendet werden.
Verwende die Version 8.5.0, Intervall. 3.0 min
@micklafisch
Copy link

Hallo,
ich habe auch Schwierigkeiten seit 8.5.0.
Ich bekomme überhaupt keine MQTT Verbindung mehr hin, das Log zeichnet keine Fehler mit MQTT auf. Andere Clients können sich problemlos mit meinem MQTT Host verbinden. Ein Update auf die aktuelle 9.0.0 hat keine Besserung gebracht - ich kann kein MQTT mehr nutzen.

2021-10-25T12:16:15: Time zone set to CET-1CEST,M3.5.0,M10.5.0/3
2021-10-25T12:16:15: =============================================================================================
2021-10-25T12:16:15: =================================== Main Started ============================================
2021-10-25T12:16:15: =============================================================================================
2021-10-25T12:16:19: Time zone set to CET-1CEST
2021-10-25T12:16:19: task_autodoFlow - next round - Round #1
2021-10-25T12:16:19: FlowControll.doFlow - ClassFlowMakeImage
2021-10-25T12:16:27: FlowControll.doFlow - ClassFlowAlignment
2021-10-25T12:16:47: FlowControll.doFlow - ClassFlowCNNGeneral
2021-10-25T12:17:01: FlowControll.doFlow - ClassFlowCNNGeneral
2021-10-25T12:17:18: FlowControll.doFlow - ClassFlowPostProcessing
2021-10-25T12:17:18: FlowControll.doFlow - ClassFlowMQTT
2021-10-25T12:17:18: task_autodoFlow - round done
2021-10-25T12:17:18: CPU Temperature: 53.3
2021-10-25T12:20:33: info_get_handler
2021-10-25T12:21:10: task_autodoFlow - next round - Round #2
2021-10-25T12:21:10: FlowControll.doFlow - ClassFlowMakeImage
2021-10-25T12:21:18: FlowControll.doFlow - ClassFlowAlignment
2021-10-25T12:21:38: FlowControll.doFlow - ClassFlowCNNGeneral
2021-10-25T12:21:52: FlowControll.doFlow - ClassFlowCNNGeneral
2021-10-25T12:22:09: FlowControll.doFlow - ClassFlowPostProcessing
2021-10-25T12:22:09: FlowControll.doFlow - ClassFlowMQTT
2021-10-25T12:22:09: task_autodoFlow - round done
2021-10-25T12:22:09: CPU Temperature: 53.3
2021-10-25T12:22:11: download_get_handler
2021-10-25T12:22:19: download_get_handler
2021-10-25T12:22:22: download_get_handler
2021-10-25T12:22:22: download_get_handler
2021-10-25T12:22:33: info_get_handler
2021-10-25T12:26:01: task_autodoFlow - next round - Round #3
2021-10-25T12:26:01: FlowControll.doFlow - ClassFlowMakeImage
2021-10-25T12:26:09: FlowControll.doFlow - ClassFlowAlignment
2021-10-25T12:26:29: FlowControll.doFlow - ClassFlowCNNGeneral
2021-10-25T12:26:43: FlowControll.doFlow - ClassFlowCNNGeneral
2021-10-25T12:27:00: FlowControll.doFlow - ClassFlowPostProcessing
2021-10-25T12:27:00: FlowControll.doFlow - ClassFlowMQTT
2021-10-25T12:27:00: task_autodoFlow - round done
2021-10-25T12:27:00: CPU Temperature: 53.3
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:27:13: info_get_handler
2021-10-25T12:28:20: download_get_handler
2021-10-25T12:28:21: download_get_handler
2021-10-25T12:29:02: download_get_handler
2021-10-25T12:29:04: download_get_handler

@jomjol
Copy link
Owner

jomjol commented Oct 25, 2021

Hi,
das Logfile sagt mir, dass der MQTT Client nicht verbunden ist. Eventuell stimmt irgendwas mit deinen Settings nicht. Schau dir mal das Config.ini genauer an, eventuell die MQTT-Einstellung nochmals neu vornehmen.

@jomjol
Copy link
Owner

jomjol commented Oct 27, 2021

Es könnte sein, dass die Adresse des MQTT-brokers nur eine direkte IP-Adresse aktzeptiert. Falls du dort einen Hostnamen verwendest, könnte es schon daran liegen.

@jomjol
Copy link
Owner

jomjol commented Oct 29, 2021

Hoffe, das Problem ist gelöst. Ansonsten nochmals melden.

@jomjol jomjol closed this as completed Oct 29, 2021
@Duese123 Duese123 mentioned this issue Feb 13, 2022
Closed
@zumheulen
Copy link

Hello, I also have problems with MQTT.
I suspected it was due to Homeassistant, but the MQTT Explorer also often pulses, but irregularly no new MQTT data.
I look at the log file, but I interpret what he sends...
Here is an excerpt from my log.

2022-10-07T13:04:31: task_autodoFlow - round done
2022-10-07T13:04:31: CPU Temperature: 30.0
2022-10-07T13:07:38: handler_wasserzaehler - Start
2022-10-07T13:07:38: handler_wasserzaehler - Start
2022-10-07T13:07:38: handler_wasserzaehler - Start
2022-10-07T13:07:38: handler_cputemp - Start
2022-10-07T13:07:38: handler_cputemp - End
2022-10-07T13:07:38: handler_rssi - Start
2022-10-07T13:07:38: handler_rssi - End
2022-10-07T13:07:38: handler_wasserzaehler - Start
2022-10-07T13:07:39: handler_prevalue - Start
2022-10-07T13:07:39: handler_prevalue - Start
2022-10-07T13:08:56: task_autodoFlow - next round - Round #79
2022-10-07T13:08:56: FlowControll.doFlow - ClassFlowMakeImage
2022-10-07T13:09:04: FlowControll.doFlow - ClassFlowAlignment
2022-10-07T13:09:25: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:09:25: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:09:27: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:09:27: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:09:28: Nach Invoke
2022-10-07T13:09:29: Nach Invoke
2022-10-07T13:09:29: Nach Invoke
2022-10-07T13:09:30: Nach Invoke
2022-10-07T13:09:30: FlowControll.doFlow - ClassFlowPostProcessing
2022-10-07T13:09:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=-1
2022-10-07T13:09:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - kein Vorgänger - Ergebnis = 9 zahl: 9.262082 ziffer_vorgaenger = -1 AnalogFehler = 3.000000
2022-10-07T13:09:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach unten - Ergebnis = 1 zahl: 1.762082 ziffer_vorgaenger = 9 AnalogFehler = 3.000000
2022-10-07T13:09:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 9 zahl: 9.642361 ziffer_vorgaenger = 1 AnalogFehler = 3.000000
2022-10-07T13:09:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach unten - Ergebnis = 2 zahl: 2.885269 ziffer_vorgaenger = 9 AnalogFehler = 3.000000
2022-10-07T13:09:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=2
2022-10-07T13:09:30: FlowControll.doFlow - ClassFlowMQTT
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=37155, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=27965, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=38269, homeassistant/zaehler/wasserzaehler/uptime, 23439
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=53267, homeassistant/zaehler/wasserzaehler/freeMem, 3074343
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=45541, homeassistant/zaehler/wasserzaehler/wifiRSSI, -63
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=49682, homeassistant/zaehler/wasserzaehler/CPUtemp, 29.444445
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=52788, homeassistant/zaehler/wasserzaehler/main/error, Neg. Rate - Read: - Raw: 00111.2919 - Pre: 111.3299
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=42570, homeassistant/zaehler/wasserzaehler/main/changeabsolut, 0.0008
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=41524, homeassistant/zaehler/wasserzaehler/main/raw, 00111.2919
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=53859, homeassistant/zaehler/wasserzaehler/main/timestamp, 2022-10-07T12:34:04
2022-10-07T13:09:30: MQTT - sent publish successful in MQTTPublish, msg_id=36864, homeassistant/zaehler/wasserzaehler/main/json, {"value":"","raw":"00111.2919","error":"Neg. Rate - Read: - Raw: 00111.2919 - Pre: 111.3299 ","rate":"","timestamp":"2022-10-07T12:34:04"}
2022-10-07T13:09:31: task_autodoFlow - round done
2022-10-07T13:09:31: CPU Temperature: 29.4
2022-10-07T13:13:38: handler_wasserzaehler - Start
2022-10-07T13:13:38: handler_wasserzaehler - Start
2022-10-07T13:13:38: handler_cputemp - Start
2022-10-07T13:13:38: handler_cputemp - End
2022-10-07T13:13:38: handler_wasserzaehler - Start
2022-10-07T13:13:38: handler_rssi - Start
2022-10-07T13:13:38: handler_rssi - End
2022-10-07T13:13:38: handler_wasserzaehler - Start
2022-10-07T13:13:38: handler_prevalue - Start
2022-10-07T13:13:38: handler_prevalue - Start
2022-10-07T13:13:56: task_autodoFlow - next round - Round #80
2022-10-07T13:13:56: FlowControll.doFlow - ClassFlowMakeImage
2022-10-07T13:14:04: FlowControll.doFlow - ClassFlowAlignment
2022-10-07T13:14:25: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:14:25: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:14:27: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:14:27: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:14:28: Nach Invoke
2022-10-07T13:14:29: Nach Invoke
2022-10-07T13:14:29: Nach Invoke
2022-10-07T13:14:30: Nach Invoke
2022-10-07T13:14:30: FlowControll.doFlow - ClassFlowPostProcessing
2022-10-07T13:14:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=-1
2022-10-07T13:14:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - kein Vorgänger - Ergebnis = 2 zahl: 2.811133 ziffer_vorgaenger = -1 AnalogFehler = 3.000000
2022-10-07T13:14:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach oben - Ergebnis = 3 zahl: 3.055086 ziffer_vorgaenger = 2 AnalogFehler = 3.000000
2022-10-07T13:14:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 9 zahl: 9.688867 ziffer_vorgaenger = 3 AnalogFehler = 3.000000
2022-10-07T13:14:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach unten - Ergebnis = 2 zahl: 2.874160 ziffer_vorgaenger = 9 AnalogFehler = 3.000000
2022-10-07T13:14:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=2
2022-10-07T13:14:30: FlowControll.doFlow - ClassFlowMQTT
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=17950, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=61820, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=27089, homeassistant/zaehler/wasserzaehler/uptime, 23739
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=4288, homeassistant/zaehler/wasserzaehler/freeMem, 3073947
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=21993, homeassistant/zaehler/wasserzaehler/wifiRSSI, -62
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=10139, homeassistant/zaehler/wasserzaehler/CPUtemp, 30.000000
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=28310, homeassistant/zaehler/wasserzaehler/main/error, Neg. Rate - Read: - Raw: 00111.2932 - Pre: 111.3299
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=43921, homeassistant/zaehler/wasserzaehler/main/changeabsolut, 0.0008
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=20594, homeassistant/zaehler/wasserzaehler/main/raw, 00111.2932
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=40703, homeassistant/zaehler/wasserzaehler/main/timestamp, 2022-10-07T12:34:04
2022-10-07T13:14:30: MQTT - sent publish successful in MQTTPublish, msg_id=12337, homeassistant/zaehler/wasserzaehler/main/json, {"value":"","raw":"00111.2932","error":"Neg. Rate - Read: - Raw: 00111.2932 - Pre: 111.3299 ","rate":"","timestamp":"2022-10-07T12:34:04"}
2022-10-07T13:14:30: task_autodoFlow - round done
2022-10-07T13:14:30: CPU Temperature: 30.0
2022-10-07T13:18:38: handler_wasserzaehler - Start
2022-10-07T13:18:38: handler_wasserzaehler - Start
2022-10-07T13:18:38: handler_wasserzaehler - Start
2022-10-07T13:18:38: handler_rssi - Start
2022-10-07T13:18:38: handler_rssi - End
2022-10-07T13:18:38: handler_wasserzaehler - Start
2022-10-07T13:18:39: handler_prevalue - Start
2022-10-07T13:18:39: handler_prevalue - Start
2022-10-07T13:18:39: handler_cputemp - Start
2022-10-07T13:18:39: handler_cputemp - End
2022-10-07T13:18:56: task_autodoFlow - next round - Round #81
2022-10-07T13:18:56: FlowControll.doFlow - ClassFlowMakeImage
2022-10-07T13:19:04: FlowControll.doFlow - ClassFlowAlignment
2022-10-07T13:19:25: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:19:25: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:19:27: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:19:27: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:19:28: Nach Invoke
2022-10-07T13:19:29: Nach Invoke
2022-10-07T13:19:30: Nach Invoke
2022-10-07T13:19:30: Nach Invoke
2022-10-07T13:19:30: FlowControll.doFlow - ClassFlowPostProcessing
2022-10-07T13:19:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=-1
2022-10-07T13:19:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - kein Vorgänger - Ergebnis = 2 zahl: 2.294982 ziffer_vorgaenger = -1 AnalogFehler = 3.000000
2022-10-07T13:19:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 5 zahl: 5.427118 ziffer_vorgaenger = 2 AnalogFehler = 3.000000
2022-10-07T13:19:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 9 zahl: 9.693307 ziffer_vorgaenger = 5 AnalogFehler = 3.000000
2022-10-07T13:19:30: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach unten - Ergebnis = 2 zahl: 2.887569 ziffer_vorgaenger = 9 AnalogFehler = 3.000000
2022-10-07T13:19:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=2
2022-10-07T13:19:30: FlowControll.doFlow - ClassFlowMQTT
2022-10-07T13:19:30: MQTT - sent publish successful in MQTTPublish, msg_id=12900, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:19:30: MQTT - sent publish successful in MQTTPublish, msg_id=58719, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:19:30: MQTT - sent publish successful in MQTTPublish, msg_id=14167, homeassistant/zaehler/wasserzaehler/uptime, 24039
2022-10-07T13:19:30: MQTT - sent publish successful in MQTTPublish, msg_id=38427, homeassistant/zaehler/wasserzaehler/freeMem, 3075619
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=22086, homeassistant/zaehler/wasserzaehler/wifiRSSI, -65
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=63835, homeassistant/zaehler/wasserzaehler/CPUtemp, 29.444445
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=32674, homeassistant/zaehler/wasserzaehler/main/error, Neg. Rate - Read: - Raw: 00111.2952 - Pre: 111.3299
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=55992, homeassistant/zaehler/wasserzaehler/main/changeabsolut, 0.0008
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=61444, homeassistant/zaehler/wasserzaehler/main/raw, 00111.2952
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=30095, homeassistant/zaehler/wasserzaehler/main/timestamp, 2022-10-07T12:34:04
2022-10-07T13:19:31: MQTT - sent publish successful in MQTTPublish, msg_id=3809, homeassistant/zaehler/wasserzaehler/main/json, {"value":"","raw":"00111.2952","error":"Neg. Rate - Read: - Raw: 00111.2952 - Pre: 111.3299 ","rate":"","timestamp":"2022-10-07T12:34:04"}
2022-10-07T13:19:31: task_autodoFlow - round done
2022-10-07T13:19:31: CPU Temperature: 24.4
2022-10-07T13:23:56: task_autodoFlow - next round - Round #82
2022-10-07T13:23:56: FlowControll.doFlow - ClassFlowMakeImage
2022-10-07T13:24:04: FlowControll.doFlow - ClassFlowAlignment
2022-10-07T13:24:08: handler_wasserzaehler - Start
2022-10-07T13:24:08: handler_wasserzaehler - Start
2022-10-07T13:24:08: handler_cputemp - Start
2022-10-07T13:24:08: handler_cputemp - End
2022-10-07T13:24:08: handler_wasserzaehler - Start
2022-10-07T13:24:08: handler_rssi - Start
2022-10-07T13:24:08: handler_rssi - End
2022-10-07T13:24:08: handler_wasserzaehler - Start
2022-10-07T13:24:08: handler_prevalue - Start
2022-10-07T13:24:08: handler_prevalue - Start
2022-10-07T13:24:25: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:24:25: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:24:27: FlowControll.doFlow - ClassFlowCNNGeneral
2022-10-07T13:24:27: ClassFlowCNNGeneral::doFlow nach Alignment
2022-10-07T13:24:28: Nach Invoke
2022-10-07T13:24:29: Nach Invoke
2022-10-07T13:24:30: Nach Invoke
2022-10-07T13:24:30: Nach Invoke
2022-10-07T13:24:30: FlowControll.doFlow - ClassFlowPostProcessing
2022-10-07T13:24:30: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=-1
2022-10-07T13:24:31: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - kein Vorgänger - Ergebnis = 2 zahl: 2.285781 ziffer_vorgaenger = -1 AnalogFehler = 3.000000
2022-10-07T13:24:31: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 5 zahl: 5.389895 ziffer_vorgaenger = 2 AnalogFehler = 3.000000
2022-10-07T13:24:31: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl eindeutig, keine Korrektur notwendig - Ergebnis = 9 zahl: 9.696198 ziffer_vorgaenger = 5 AnalogFehler = 3.000000
2022-10-07T13:24:31: ClassFlowCNNGeneral::ZeigerEvalAnalogNeu - Zahl uneindeutig, Korrektur nach unten - Ergebnis = 2 zahl: 2.885269 ziffer_vorgaenger = 9 AnalogFehler = 3.000000
2022-10-07T13:24:31: ClassFlowCNNGeneral::getReadout _analog=0, _extendedResolution=0, prev=2
2022-10-07T13:24:31: FlowControll.doFlow - ClassFlowMQTT
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=24324, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=7031, homeassistant/zaehler/wasserzaehler/connection, connected
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=14472, homeassistant/zaehler/wasserzaehler/uptime, 24340
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=13563, homeassistant/zaehler/wasserzaehler/freeMem, 3075627
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=43952, homeassistant/zaehler/wasserzaehler/wifiRSSI, -64
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=28744, homeassistant/zaehler/wasserzaehler/CPUtemp, 29.444445
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=26667, homeassistant/zaehler/wasserzaehler/main/error, Neg. Rate - Read: - Raw: 00111.2952 - Pre: 111.3299
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=11987, homeassistant/zaehler/wasserzaehler/main/changeabsolut, 0.0008
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=51942, homeassistant/zaehler/wasserzaehler/main/raw, 00111.2952
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=50769, homeassistant/zaehler/wasserzaehler/main/timestamp, 2022-10-07T12:34:04
2022-10-07T13:24:31: MQTT - sent publish successful in MQTTPublish, msg_id=63651, homeassistant/zaehler/wasserzaehler/main/json, {"value":"","raw":"00111.2952","error":"Neg. Rate - Read: - Raw: 00111.2952 - Pre: 111.3299 ","rate":"","timestamp":"2022-10-07T12:34:04"}
2022-10-07T13:24:31: task_autodoFlow - round done
2022-10-07T13:24:31: CPU Temperature: 30.0
2022-10-07T13:25:57: info_get_handler
2022-10-07T13:25:57: info_get_handler
2022-10-07T13:25:57: info_get_handler
2022-10-07T13:25:58: info_get_handler
2022-10-07T13:25:58: info_get_handler
2022-10-07T13:25:58: info_get_handler
2022-10-07T13:25:58: info_get_handler
2022-10-07T13:25:58: info_get_handler
2022-10-07T13:26:02: download_get_handler
2022-10-07T13:26:10: download_get_handler
2022-10-07T13:26:38: download_get_handler
2022-10-07T13:26:40: download_get_handler

@caco3
Copy link
Collaborator

caco3 commented Oct 7, 2022 •
edited
Loading

@zumheulen Please open a new issue with the relevant information, resp. check for other open, related issue!
This issue got closed a year ago!

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
5 participants
@caco3 @jomjol @micklafisch @zumheulen @ESP2000