Q178126

layout	title	permalink
page	Q178126: SNA NT Clients Should not Fall Back to Named Pipes	/kb/178/Q178126/

Q178126: SNA NT Clients Should not Fall Back to Named Pipes

{% raw %}

Article: Q178126
Product(s): Microsoft SNA Server
Version(s): WINDOWS:2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2
Operating System(s): 
Keyword(s): 
Last Modified: 13-JUN-2001

-------------------------------------------------------------------------------
The information in this article applies to:

- Microsoft SNA Server, versions 2.1, 2.11, 2.11 SP1, 2.11 SP2, 3.0, 3.0 SP1, 3.0 SP2 
-------------------------------------------------------------------------------

SYMPTOMS
========

When using a Windows NT SNA Server Client configured to use TCP/IP sockets
connection against SNA Server, the client will try to using named pipes if the
TCP connection fails. This behavior may need to changed in order to prevent
extra network traffic. The use of named pipes may result in extra network
traffic. For more information, please see the following article in the Microsoft
Knowledge Base:

  Q128985 Comparing SNA client TCP/IP named pipes vs sockets

One sign that the client has switched to named pipes is if the initial client
connection takes 45 to 60 seconds to complete. This is usually the time required
for the default TCP/IP retry timers to expire.

STATUS
======

Microsoft has confirmed this to be a problem in SNA Server versions 2.1, 2.11
SP1, 2.11 SP2, 3.0, 3.0 SP1, and 3.0 SP2.

This problem was corrected in the latest SNA Server version 3.0 U.S. Service
Pack. For information on obtaining this Service Pack, query on the following
word in the Microsoft Knowledge Base (without the spaces):

  S E R V P A C K


A supported fix for SNA Server version 2.11 is now available, but has not been
fully regression-tested and should be applied only to systems experiencing this
specific problem. Unless you are severely impacted by this specific problem,
Microsoft recommends that you wait for the next Service Pack that contains this
fix. Contact Microsoft Product Support Services for more information.



MORE INFORMATION
================

This function is By Design for the Windows NT SNA Server Client. However, a
hotfix is available that allows this function to be disabled by adding the
following registry parameter:

  HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Services\SnaBase\Parameters\ 
  IgnorenamedPipes:REG_DWORD:0|1,

The default is 0 (1 = Never use named pipes)

Note: The hotfix must first be applied.

Additional query words:

======================================================================
Keywords          :  
Technology        : kbAudDeveloper kbSNAServSearch kbSNAServ300 kbSNAServ211 kbSNAServ210 kbSNAServ211SP1 kbSNAServ211SP2 kbSNAServ300SP1 kbSNAServ300SP2
Version           : WINDOWS:2.1,2.11,2.11 SP1,2.11 SP2,3.0,3.0 SP1,3.0 SP2
Issue type        : kbbug
Solution Type     : kbfix

=============================================================================

{% endraw %}