| layout | title | permalink |
|---|---|---|
page |
Q132552: SNA: Separate Logon Prompt If Non-MS Network Protocol Installed |
/kb/132/Q132552/ |
{% raw %}
Article: Q132552
Product(s): Microsoft SNA Server
Version(s): WINDOWS:2.1,2.11 SP1;2.11 SP2,3.0 (all SP),4.0,4.0 SP1,4.0 SP2,4.0 SP3,4.0 SP1
Operating System(s):
Keyword(s):
Last Modified: 13-JUN-2001
-------------------------------------------------------------------------------
The information in this article applies to:
- Microsoft SNA Server, versions 2.1, 2.11 SP1, 2.11 SP2, 3.0 SP1, 3.0 SP2, 3.0 SP3, 3.0 SP4, 4.0, 4.0 SP1, 4.0 SP2, 4.0 SP3, 4.0 SP1, on platform(s):
- the operating system: Microsoft Windows NT
-------------------------------------------------------------------------------
SYMPTOMS
========
A separate logon screen appears each time the SNA client software (WNAP) is
started. (WNAP is an abbreviation for Windows Network Access Process.)
This problem occurs when an SNA Server Windows 3.1 or 3.11 client is installed
with a protocol other than Microsoft Networking (named pipes), even if the user
is logged on to the same Windows NT Server.
CAUSE
=====
You do not have a secure communication channel established yet.
When your SNA Server Windows 3.1 or 3.11 client software uses the TCP/IP sockets,
NetWare IPX/SPX, AppleTalk, or Banyan Vines IP (or any client- server transport,
except named pipes) protocol to communicate with the Windows NT server, a secure
communication channel is not established with the server, because the Windows
Socket interface these protocols rely on does not include guaranteed security.
Therefore, to ensure a secure communication channel, SNA client software (WNAP)
requires you to log on separately to the Windows NT servers running SNA Server.
When you log on to WNAP, your user name, password, and domain name credentials
are combined and encrypted and then stored locally so debug programs cannot
determine your password. These encrypted credentials are validated by the server
when the client connects to the server. If the validation fails, you are
prompted to reenter the password.
When the client tries to connect to other servers, you are not prompted again for
your credentials, because your previously encrypted credentials are used for
validation automatically.
NOTE: SNA Server Windows NT clients take advantage of a single-user logon process
that does not require a special SNA Server logon, regardless of the protocol
used to connect to the servers.
RESOLUTION
==========
Depending on which version of SNA Server you are running one of the following
solutions applies.
SNA Server 2.1
--------------
When you log on to Windows NT Server using TCP/IP, NetWare IPX/SPX, or Banyan IP
from Windows 3.1 or Windows for Workgroups 3.11 clients, you can use one of the
two WNAP command lines noted below to cache your credentials and prevent the
Domain Login dialog box from appearing when you start WNAP manually.
Add an icon in the Windows Startup group for WNAP.EXE (the SNA Windows 3.1 and
Windows for Workgroups 3.11 client program) that has the following command line.
This causes WNAP to start automatically when Windows for Workgroups is started:
"wnap /user: /pwd:" (without the quotation marks)
NOTE: Do not type a user name and password after /user: and /pwd:, respectively!
There must be no space after the colon in /pwd:; however, a space after /user:
is allowed.
This command lets you log on to the Windows NT Server using the guest account
(provided that the guest account is enabled and has no password).
The next command requires that you have a valid account in the Windows NT SNA
Server domain:
"wnap /user:<user_name> /pwd:<password>" (without the quotation
marks)
SNA Server 2.11 and Later
-------------------------
The following additional options are available under SNA Server version 2.11 and
later:
1. You can add the following two new entries to the [WNAP] section of the
WIN.INI file:
"LogonUserName=<user_name>
LogonPassword=<password>" (without the quotation marks)
WNAP parses these entries and uses them when an application is first started,
reducing the need for starting WNAP manually with command- line parameters.
Also, to use the guest account using the parameters in WIN.INI, add these
entries:
"LogonUserName=guest
LogonPassword= " (without the quotation marks)
NOTE: Do not include a space after the equal sign (=).
2. Automate the use of Windows for Workgroups 3.11 cached domain passwords.
If the above WIN.INI entries are not present on a Windows for Workgroups 3.11
client, and if you are using the cached domain password feature of Windows for
Workgroups (enabled in the network Control Panel Startup dialog box by selecting
Log On To Windows NT Or LAN Manager Domain), WNAP automatically retrieves your
credentials from Windows for Workgroups when WNAP starts.
WNAP starts automatically when an SNA Server application (3270, 5250, or an
application written to the SNA Server APIs) is started, or when Windows for
Workgroups is started (if a WNAP icon is added to the Startup group).
NOTE: Your data on SNA Server resources may not be safe if you log off from
Windows for Workgroups without terminating WNAP.
This is because, by default, WNAP remains running even if you log off from
Windows for Workgroups and then log back on. Therefore, if you log off from
Windows for Workgroups without terminating WNAP and a new user logs on, then
WNAP still has your credentials cached because WNAP only checks the Windows for
Workgroups credentials during WNAP startup. This can become a security problem
because the new user now has access to all your SNA Server resources.
To solve this problem, configure WNAP as follows so that it terminates
automatically when you quit the last SNA application:
1. Add AutoTerminate=Yes to the [WNAP] section of the WIN.INI file.
2. Start WNAP automatically by starting an SNA application.
NOTE: If you start WNAP manually, WNAP does not terminate automatically when the
last SNA application quits, even if AutoTerminate is set to Yes.
With some emulators, WNAP terminates when the last connection is disconnected;
with other emulators, you need to quit the emulator. This behavior depends on
how the emulator is implemented. With the SNA Server applets, the WNAP
terminates when you quit the applet.
NOTE: If your Windows for Workgroups domain password expires, or if you are
required to change your domain password during the next domain logon attempt,
the SNA client logon fails with Error 546.
To solve this problem, you must log on and change your domain password first. You
may then have to update your SNA client configuration to use your new password.
There is no additional user interaction required when you use the Windows for
Workgroups cached domain password.
SNA Server MS-DOS Client
------------------------
When you use the SNA Server MS-DOS client, you can start the SNABASE.EXE program
as follows:
" snabase /user:<user_name> /pwd:<password>" (without the
quotation marks)
Additional query words: prodsna 2.00 2.10 2.11 3.0 4.0
======================================================================
Keywords :
Technology : kbAudDeveloper kbSNAServSearch
Version : WINDOWS:2.1,2.11 SP1;2.11 SP2,3.0 (all SP),4.0,4.0 SP1,4.0 SP2,4.0 SP3,4.0 SP1
=============================================================================
{% endraw %}