This repository has been archived by the owner on Dec 8, 2024. It is now read-only.
Add a battery kill switch #10
Labels
feature
New feature or request
Comments
|
This will need a JST-XH connector and a 5V to 3.3V logic level converter as the LiPo pack has a 4.2V output at full charge from the battery balance connector. Possible product: |
|
This would be nice if the BLEBas service can be added within the BluetoothController setup in #42 to display battery levels remotely. |
|
https://www.adafruit.com/product/1085 The above ADS1115 product was selected for identifying the battery levels. |
|
A new battery monitor service needs to be added so the notifications from the battery and the ADS1115 can be transmitted to the BluetoothController and exposed by the BLEBas service. |
|
Duplicate of #80 |
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
The LiPo pack will need a voltage monitor attached to a kill switch on the firing loop.
This ensures the battery stays within a safe operating voltage to prevent it from being damaged.
The text was updated successfully, but these errors were encountered: