Help with 1.3inch LCD HAT (waveshare)

[lordpysc]

Hi everyone, I bought the 1.3inch LCD HAT from waveshare. I just need to confirm if the screen is supported. I was looking thru the utils and found ( elif config['ui']['display']['type'] in ('wavesharelcd1in3', 'wslcd1in3'):
config['ui']['display']['type'] = 'wavesharelcd1in3' ) just need to be sure if thats the one to go to. Thanks in advance,

[jayofelony]

Yep should be it, let me know if it works

[jayofelony]

try this:
0W:
sudo nano /boot/config.txt find the spi0-0cs in your [pix] section and change it to spi0-2cs.

02W, 3, 4 and 5:
sudo nano /boot/firmware/config.txt find the spi0-0cs in your [pix] section and change it to spi0-2cs.

---

ui.invert = true makes the the background white

[lordpysc]

Ok will do, thanks so much for taking the time to point me in the right direction, kudos for all the hard work you do!

[lordpysc]

try this:

0W:

sudo nano /boot/config.txt find the spi0-0cs in your [pix] section and change it to spi0-2cs.

02W, 3, 4 and 5:

sudo nano /boot/firmware/config.txt find the spi0-0cs in your [pix] section and change it to spi0-2cs.

---

ui.invert = true makes the the background white

I did it, and saw my screen flashing white for a second then went back to backlight black.

I went ahead and did a fresh flash on a Rb Pi 4, selected the screen, but same black backlight and I also changed the spi0-2cs, same one flash white and back to black.

[lordpysc]

try this:

0W:

sudo nano /boot/config.txt find the spi0-0cs in your [pix] section and change it to spi0-2cs.

02W, 3, 4 and 5:

sudo nano /boot/firmware/config.txt find the spi0-0cs in your [pix] section and change it to spi0-2cs.

---

ui.invert = true makes the the background white

I did it, and saw my screen flashing white for a second then went back to backlight black.

I went ahead and did a fresh flash on a Rb Pi 4, selected the screen, but same black backlight and I also changed the spi0-2cs, same one flash white and back to black.

My friend Jay, I was able to find a fix for it. After a few hours of research, I was able to figure the type of screen 'lcdhat' and removed rotation cuz for some reason with rotation even set to 0 screen was unresponsive.

Now trying to find a fix for full screen lol

Proud dad of 2, soon to be 3 gotchis 😂
Thanks for your support.

[jayofelony]

Try switching the sizes around if that works