Skip to content

Latest commit

 

History

History
124 lines (92 loc) · 3.58 KB

BUILDING.md

File metadata and controls

124 lines (92 loc) · 3.58 KB
Raw

Building with CMake

Build

This project doesn't require any special command-line flags to build to keep things simple.

Here are the steps for building in release mode with a single-configuration generator, like the Unix Makefiles one:

cmake -S . -B build -D CMAKE_BUILD_TYPE=Release
cmake --build build

Here are the steps for building in release mode with a multi-configuration generator, like the Visual Studio ones:

cmake -S . -B build
cmake --build build --config Release

But RPP is header-only library, so, without enabling any extra options is just compiles "nothing". So, you can use next options to enable/disable some parts of project:

  • RPP_BUILD_TESTS - (ON/OFF) build unit tests (default OFF)
  • RPP_BUILD_EXAMPLES - (ON/OFF) build examples of usage of RPP (default OFF)
  • RPP_BUILD_SFML_CODE - (ON/OFF) build RPP code related to SFML or not (default OFF) - requires SFML to be installed
  • RPP_BUILD_QT_CODE - (ON/OFF) build RPPQT related code (examples/tests)(rppqt module doesn't requires this one) (default OFF) - requires QT5/6 to be installed

By default, it provides rpp and rppqt INTERFACE modules.

Install

This project doesn't require any special command-line flags to install to keep things simple. As a prerequisite, the project has to be built with the above commands already.

The below commands require at least CMake 3.15 to run, because that is the version in which Install a Project was added.

Here is the command for installing the release mode artifacts with a single-configuration generator, like the Unix Makefiles one:

cmake --install build

Here is the command for installing the release mode artifacts with a multi-configuration generator, like the Visual Studio ones:

cmake --install build --config Release

Optionally you can download it via FetchContent

Include(FetchContent)

FetchContent_Declare(
    RPP
    GIT_REPOSITORY https://github.com/victimsnino/ReactivePlusPlus.git
    GIT_TAG        origin/v2
)

FetchContent_MakeAvailable(RPP)

CMake package

This project exports a CMake package to be used with the find_package command of CMake:

  • Package name: RPP
  • Target names:
  • RPP::rpp - main rpp INTERFACE target
  • RPP::rppqt - additional INTERFACE target to extend functionality for QT. rppqt doesn't include QT or even doesn't link with that.

Example usage:

find_package(RPP REQUIRED)
# Declare the imported target as a build requirement using PRIVATE, where
# project_target is a target created in the consuming project
target_link_libraries(
    project_target PRIVATE
    RPP::rpp
    RPP::rppqt
)

Usage:

To use ReactivePlusPlus in your code just do

#include <rpp/rpp.hpp>

to include whole library functionality and don't worry about includes. Also you can include only forwardings for everyting

#include <rpp/fwd.hpp>

To avoid including "everyting" you can just include some iterested part of code (or forward it as well)

#include <rpp/operators/map.hpp>
#include <rpp/observables/fwd.hpp>

NOTE: In case of partial including of operators you need to include headers for each used operators like

#include <rpp/operators/map.hpp>
#include <rpp/operators/filter.hpp>

else it would not be possible to compile