diff --git a/docs/changelogs/v0.16.md b/docs/changelogs/v0.16.md index b5368d285b4..a8acacebcc6 100644 --- a/docs/changelogs/v0.16.md +++ b/docs/changelogs/v0.16.md @@ -11,6 +11,7 @@ Below is an outline of all that is in this release, so you get a sense of all th - [Overview](#overview) - [πŸ”¦ Highlights](#-highlights) - [πŸ›£οΈ More configurable delegated routing system](#️-more-configurable-delegated-routing-system) + - [🌍 WebTransport new experimental Transport](#-webtransport-new-experimental-transport) - [Changelog](#changelog) - [Contributors](#contributors) @@ -85,6 +86,37 @@ $ ipfs config Routing.Methods --json '{ ``` +### 🌍 WebTransport new experimental Transport + +A new feature of [`go-libp2p`](https://github.com/libp2p/go-libp2p/releases/tag/v0.23.0) is [WebTransport](https://github.com/libp2p/go-libp2p/issues/1717). + +For now it is **disabled by default** and considered **experimental**. +If you find issues running it please [report them to us](https://github.com/ipfs/kubo/issues/new). + +In the future Kubo will listen on WebTransport by default for anyone already listening on QUIC addresses. + +WebTransport is a new transport protocol currently under development by the [IETF](https://datatracker.ietf.org/wg/webtrans/about/) and the [W3C](https://www.w3.org/TR/webtransport/), and [already implemented by Chrome](https://caniuse.com/webtransport). +Conceptually, it’s like WebSocket run over QUIC instead of TCP. Most importantly, it allows browsers to establish (secure!) connections to WebTransport servers without the need for CA-signed certificates, +thereby enabling any js-libp2p node running in a browser to connect to any kubo node, with zero manual configuration involved. + +The previous alternative is websocket secure, which require installing a reverse proxy and TLS certificates manually. + +#### How to enable WebTransport + +Thoses steps are temporary and wont be needed once we make it enabled by default. + +1. Enable the WebTransport transport: + `ipfs config Swarm.Transports.Network.WebTransport --json true` +1. Add a listener address for WebTransport to your `Addresses.Swarm` key, for example: + ```json + [ + "/ip4/0.0.0.0/tcp/4001", + "/ip4/0.0.0.0/udp/4001/quic", + "/ip4/0.0.0.0/udp/4002/quic/webtransport" + ] + ``` +1. Restart your daemon to apply the config changes. + ### Changelog diff --git a/docs/config.md b/docs/config.md index fcd67e8c6c1..80fc0f24343 100644 --- a/docs/config.md +++ b/docs/config.md @@ -148,6 +148,8 @@ config file at runtime. - [`Swarm.Transports.Network.Websocket`](#swarmtransportsnetworkwebsocket) - [`Swarm.Transports.Network.QUIC`](#swarmtransportsnetworkquic) - [`Swarm.Transports.Network.Relay`](#swarmtransportsnetworkrelay) + - [`Swarm.Transports.Network.WebTransport`](#swarmtransportsnetworkwebtransport) + - [`How to enable WebTransport`](#how-to-enable-webtransport) - [`Swarm.Transports.Security`](#swarmtransportssecurity) - [`Swarm.Transports.Security.TLS`](#swarmtransportssecuritytls) - [`Swarm.Transports.Security.SECIO`](#swarmtransportssecuritysecio) @@ -205,7 +207,7 @@ documented in `ipfs config profile --help`. Configures the node to use the flatfs datastore. Flatfs is the default datastore. - This is the most battle-tested and reliable datastore. + This is the most battle-tested and reliable datastore. You should use this datastore if: - You need a very simple and very reliable datastore, and you trust your @@ -223,9 +225,9 @@ documented in `ipfs config profile --help`. Configures the node to use the experimental badger datastore. Keep in mind that this **uses an outdated badger 1.x**. - Use this datastore if some aspects of performance, + Use this datastore if some aspects of performance, especially the speed of adding many gigabytes of files, are critical. However, be aware that: - + - This datastore will not properly reclaim space when your datastore is smaller than several gigabytes. If you run IPFS with `--enable-gc`, you plan on storing very little data in your IPFS node, and disk usage is more critical than performance, consider using @@ -358,6 +360,7 @@ Supported Transports: * tcp/ip{4,6} - `/ipN/.../tcp/...` * websocket - `/ipN/.../tcp/.../ws` * quic - `/ipN/.../udp/.../quic` +* webtransport (*experiemental*) - `/ipN/.../udp/.../quic/webtransport` - require using a different port than the QUIC listener for now Default: ```json @@ -804,17 +807,17 @@ Below is a list of the most common public gateway setups. }' ``` - **Backward-compatible:** this feature enables automatic redirects from content paths to subdomains: - + `http://dweb.link/ipfs/{cid}` β†’ `http://{cid}.ipfs.dweb.link` - + - **X-Forwarded-Proto:** if you run Kubo behind a reverse proxy that provides TLS, make it add a `X-Forwarded-Proto: https` HTTP header to ensure users are redirected to `https://`, not `http://`. It will also ensure DNSLink names are inlined to fit in a single DNS label, so they work fine with a wildcart TLS cert ([details](https://github.com/ipfs/in-web-browsers/issues/169)). The NGINX directive is `proxy_set_header X-Forwarded-Proto "https";`.: - + `http://dweb.link/ipfs/{cid}` β†’ `https://{cid}.ipfs.dweb.link` - + `http://dweb.link/ipns/your-dnslink.site.example.com` β†’ `https://your--dnslink-site-example-com.ipfs.dweb.link` - + - **X-Forwarded-Host:** we also support `X-Forwarded-Host: example.com` if you want to override subdomain gateway host from the original request: - + `http://dweb.link/ipfs/{cid}` β†’ `http://{cid}.ipfs.example.com` @@ -839,7 +842,7 @@ Below is a list of the most common public gateway setups. Disable fetching of remote data (`NoFetch: true`) and resolving DNSLink at unknown hostnames (`NoDNSLink: true`). Then, enable DNSLink gateway only for the specific hostname (for which data is already present on the node), without exposing any content-addressing `Paths`: - + ```console $ ipfs config --json Gateway.NoFetch true $ ipfs config --json Gateway.NoDNSLink true @@ -871,7 +874,7 @@ Type: `string` (base64 encoded) This section includes internal knobs for various subsystems to allow advanced users with big or private infrastructures to fine-tune some behaviors without the need to recompile Kubo. -**Be aware that making informed change here requires in-depth knowledge and most users should leave these untouched. All knobs listed here are subject to breaking changes between versions.** +**Be aware that making informed change here requires in-depth knowledge and most users should leave these untouched. All knobs listed here are subject to breaking changes between versions.** ### `Internal.Bitswap` @@ -1317,7 +1320,7 @@ Parallel: - `ExecuteAfter:duration`: Providing this param will delay the execution of that router at the specified time. It accepts strings compatible with Go `time.ParseDuration(string)` (`10s`, `1m`, `2h`). - `IgnoreErrors:bool`: It will specify if that router should be ignored if an error occurred. - `Timeout:duration`: Global timeout. It accepts strings compatible with Go `time.ParseDuration(string)` (`10s`, `1m`, `2h`). - + Sequential: - `Routers`: A list of routers that will be executed in order: - `Name:string`: Name of the router. It should be one of the previously added to `Routers` list. @@ -1346,7 +1349,7 @@ Type: `object[string->string]` ### `Routing: Methods` -`Methods:map` will define which routers will be executed per method. The key will be the name of the method: `"provide"`, `"find-providers"`, `"find-peers"`, `"put-ipns"`, `"get-ipns"`. All methods must be added to the list. +`Methods:map` will define which routers will be executed per method. The key will be the name of the method: `"provide"`, `"find-providers"`, `"find-peers"`, `"put-ipns"`, `"get-ipns"`. All methods must be added to the list. The value will contain: - `RouterName:string`: Name of the router. It should be one of the previously added to `Routing.Routers` list. @@ -1619,7 +1622,7 @@ Type: `optionalInteger` #### `Swarm.RelayService.ReservationTTL` -Duration of a new or refreshed reservation. +Duration of a new or refreshed reservation. Default: `"1h"` @@ -1858,7 +1861,7 @@ Configuration section for libp2p _network_ transports. Transports enabled in this section will be used for dialing. However, to receive connections on these transports, multiaddrs for these transports must be added to `Addresses.Swarm`. -Supported transports are: QUIC, TCP, WS, and Relay. +Supported transports are: QUIC, TCP, WS, Relay and WebTransport. Each field in this section is a `flag`. @@ -1934,6 +1937,49 @@ Listen Addresses: * This transport is special. Any node that enables this transport can receive inbound connections on this transport, without specifying a listen address. + +#### `Swarm.Transports.Network.WebTransport` + +A new feature of [`go-libp2p`](https://github.com/libp2p/go-libp2p/releases/tag/v0.23.0) +is the [WebTransport](https://github.com/libp2p/go-libp2p/issues/1717) transport. + +This is a spiritual descendant of WebSocket but over `HTTP/3`. +Since this runs on top of `HTTP/3` it uses `QUIC` under the hood. +We expect it to perform worst than `QUIC` because of the extra overhead, +this transport is really meant at agents that cannot do `TCP` or `QUIC` (like browsers). + +For now it is **disabled by default** and considered **experimental**. +If you find issues running it please [report them to us](https://github.com/ipfs/kubo/issues/new). + +In the future Kubo will listen on WebTransport by default for anyone already listening on QUIC addresses. + +WebTransport is a new transport protocol currently under development by the IETF and the W3C, and already implemented by Chrome. +Conceptually, it’s like WebSocket run over QUIC instead of TCP. Most importantly, it allows browsers to establish (secure!) connections to WebTransport servers without the need for CA-signed certificates, +thereby enabling any js-libp2p node running in a browser to connect to any kubo node, with zero manual configuration involved. + +The previous alternative is websocket secure, which require installing a reverse proxy and TLS certificates manually. + +Default: Disabled + +Type: `flag` + + +#### How to enable WebTransport + +Thoses steps are temporary and wont be needed once we make it enabled by default. + +1. Enable the WebTransport transport: + `ipfs config Swarm.Transports.Network.WebTransport --json true` +1. Add a listener address for WebTransport to your `Addresses.Swarm` key, for example: + ```json + [ + "/ip4/0.0.0.0/tcp/4001", + "/ip4/0.0.0.0/udp/4001/quic", + "/ip4/0.0.0.0/udp/4002/quic/webtransport" + ] + ``` +1. Restart your daemon to apply the config changes. + ### `Swarm.Transports.Security` Configuration section for libp2p _security_ transports. Transports enabled in @@ -2071,4 +2117,4 @@ Note: this does NOT work with Go's default DNS resolver. To make this a global s Default: Respect DNS Response TTL -Type: `optionalDuration` \ No newline at end of file +Type: `optionalDuration`