Skip to content

Releases: intel/xpumanager

V1.2.29

02 Feb 14:31
@taotod taotod
V1.2.29
17a4d42
Compare
Choose a tag to compare
V1.2.29

New features in this release

  • [XPU Manager/SMI] Support the new Redfish interface introduced by some Supermicro new BMC firmware.
  • [XPU Manager/SMI] Add RC6 disablement before updating Max series GPU GFX firmware
  • [XPU Manager/SMI] Add the force option to discovery --listamcversions command

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6/9.2 (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6/9.2 (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.28

19 Jan 08:07
@taotod taotod
V1.2.28
9d3e4c4
Compare
Choose a tag to compare
V1.2.28

New features in this release

  • [XPU Manager] Improve per-device telemetries with dump CLI.
  • [Docker image] Provide the CLI full-functions image

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6/9.2 (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6/9.2 (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.27

05 Jan 08:28
@taotod taotod
V1.2.27
c0b9547
Compare
Choose a tag to compare
V1.2.27

New features in this release

  • [XPU Manager/XPU-SMI] Change Flex Series GPU PCIe throughput diagnostics thresholds.
  • [XPU Manager/XPU-SMI] Resolve some potential stability issues

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6/9.2 (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6/9.2 (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.26

25 Dec 12:35
@taotod taotod
V1.2.26
dcc3345
Compare
Choose a tag to compare
V1.2.26

New features in this release

  • [XPU Manager/XPU-SMI] Support openEuler 22.03 OS (xpu-smi-*.el8.x86_64.rpm, xpumanager-*el8.x86_64.rpm)
  • [XPU Manager/XPU-SMI] Support more Max Series GPU models
  • [XPU Manager/XPU-SMI] Improve CLI behavior in containers
  • [Windows CLI] Report the vGPU utilization and memory usage with Sysman interface in Windows VM

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6/9.2 (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6/9.2 (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.25

08 Dec 05:37
@taotod taotod
V1.2.25_SMC
e97df1b
Compare
Choose a tag to compare
V1.2.25

New features in this release

  • [XPU Manager/XPU-SMI] Support H3C XG310 GPU
  • [XPU Manager/XPU-SMI] Resolve the GPU scheduler configuration issue
  • [XPU Manager/XPU-SMI] Change the Redfish host timeout to 2 minutes for some BMC slow response

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6/9.2 (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6/9.2 (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.24

24 Nov 07:59
@taotod taotod
V1.2.24
2fbcbed
Compare
Choose a tag to compare
V1.2.24

New features in this release

  • [SMI] Improve some command performance on multiple-GPU system
  • [XPU Manager/SMI] Directly use the temperature register to report the Flex series GPU core temperature
  • [XPU Manager/SMI] Integrate the latest PCM library to better report the GPU PCIe throughput on the 4th-generation Xeon systems.

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6/9.2 (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6/9.2 (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP4/SP5 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.23

10 Nov 12:48
@taotod taotod
V1.2.23
7f3708e
Compare
Choose a tag to compare
V1.2.23

New features in this release

  • [XPU Manager/SMI] Support to diagnose multiple devices with one command
  • [XPU Manager/SMI] Make XPU Manager not report the tile as device
  • [XPU Manager/SMI] Resolve the issue that MDF is not rightly reported on multi-tile GPU

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6 (installer files: xpu-smi-*.el8.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6 (installer files: xpumanager-*.el8.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.21

20 Oct 11:35
@taotod taotod
V1.2.21
a0fec30
Compare
Choose a tag to compare
V1.2.21

New features in this release

  • [XPU Manager/SMI] Support to update GFX code/data firmware when Level Zero fails to initialize
  • [XPU Manager/SMI] Support the Redfish interface change of the new Supermicro server BMC firmware
  • [XPU Manager/SMI] Resolve the issue: fail to report the Xe Link calibration on some Linux OS

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6 (installer files: xpu-smi-*.el8.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6 (installer files: xpumanager-*.el8.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.20

09 Oct 06:34
@taotod taotod
V1.2.20
221281f
Compare
Choose a tag to compare
V1.2.20

New features in this release

  • [XPU Manager/SMI] Support update all GPU's GFX/GFX_Data/GFX_PSCBIN in one command.
  • [XPU Manager/SMI] Change UUID to SOC UUID in discovery CLI output
  • [XPU Manager/SMI] Report the upper power limit as the default power limit for Flex series GPU in Linux CLI output
  • [XPU Manager/SMI] Fix the issue: the generated GPU log can be accessed by root user only

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6 (installer files: xpu-smi-*.el8.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6 (installer files: xpumanager-*.el8.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading

V1.2.19

22 Sep 07:54
@taotod taotod
V1.2.19
3fc29ef
Compare
Choose a tag to compare
V1.2.19

New features in this release

  • [XPU Manager/SMI] Support the post package repair (PPR) operation on Max series GPU memory in config command.
  • [XPU Manager/SMI] Show "N/A" value for unavailable or unapplicable device info and telemetries in CLI
  • [Icinga GPU Plugin] Enable Icinga plugin based on XPU-SMI
  • [XPU Manager/SMI] Increase XPUM_MAX_CPU_LIST_LEN from 128 to 512 for some systems in the file, core/include/xpum_structs.h. If your application use XPU Manager library interface, please rebuild your application with XPU Manager/XPU-SMI 1.2.19
  • [XPU Manager/SMI] Fix the issue: Xe Link calibration date may not right on some operating systems.

Supported devices

  • Intel(R) Data Center GPU Flex Series
  • Intel(R) Data Center GPU Max Series

Supported OSes

  • XPU-SMI

    • CentOS 8/9 Stream (installer files: xpu-smi-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpu-smi-*.el7.x86_64.rpm)
    • Ubuntu 20.04.3/22.04 (installer files: xpu-smi_*.u22.04/22.04_amd64.rpm)
    • RHEL 8.5/8.6 (installer files: xpu-smi-*.el8.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpu-smi-*.x86_64.rpm)
    • Debian 10.13 (installer files: xpu-smi_*+deb10u1_amd64.deb)
    • Windows Server 2022/2019 (file: xpu-smi-*_win.zip, limited supporting: GPU device info, GPU telemetries, GPU settings, GPU firmware update)

  • XPU Manager

    • Ubuntu 20.04.3/22.04 (installer files: xpumanager_*.u20.04/u22.04_amd64.deb)
    • RHEL 8.5/8.6 (installer files: xpumanager-*.el8.x86_64.rpm)
    • CentOS 8/9 Stream (installer files: xpumanager-*.el8/el9.x86_64.rpm)
    • CentOS 7.4/7.9 (installer files: xpumanager-*.el7.x86_64.rpm)
    • SLES 15 SP3/SP4 (installer files: xpumanager-*.x86_64.rpm)

Notice

  • How to enable AMC firmware update on HPE DL380 Gen10 server
    • iLO5 firmware version should be v2.78 or newer
    • "Virtual NIC" should be enabled on iLO web console
    • "cdc_eem" should be built in the Linux kernel which can be checked with the command "lsmod | grep cdc_eem"
    • The virtual NIC (usb*) should be manually activated in Linux OS with the commands: "ifconfig usb* up" and "dhclient usb*"
  • How to enable AMC firmware update on Dell PowerEdge R750 server
    • iDRAC firmware version should be v6.10.80.00 or newer
    • Set "Pass-through Mode" of "OS to iDRAC Pass-through" to "USB NIC"
  • How to enable AMC firmware update on Intel D50DNP server
    • BMC firmware version should be v1.53 or newer
    • Enable "Host Interface" in "Configuration" -> "Security Settings" page and save.
    • Set the Host Interface IP address (may like eth2) and save. The IP address may like 192.168.10.1 and subnet mask may be 255.255.255.0.
    • Reboot OS to make Redfish host interface take effect in OS. You may run the command "sudo dmidecode -t 42" to check.
  • How to enable AMC firmware update on Lenovo ThinkSystem SD650-I V3 server
    • BMC firmware should be v1.21 or newer.
    • Enable "Ethernet Over USB" in "BMC Configuration" -> "Network" page.
    • Reboot OS to make Redfish host interface take effect in OS.
Loading