CTokenCheckRepay.sol

pragma solidity ^0.5.16;

import "./ComptrollerInterface.sol";
import "./CTokenInterfaces.sol";
import "./ErrorReporter.sol";
import "./Exponential.sol";
import "./EIP20Interface.sol";
import "./EIP20NonStandardInterface.sol";
import "./InterestRateModel.sol";

/**
 * @title Compound's CToken Contract
 * @notice Abstract base for CTokens
 * @author Compound
 */
contract CTokenCheckRepay is CTokenInterface, Exponential, TokenErrorReporter {
    /**
     * @notice Initialize the money market
     * @param comptroller_ The address of the Comptroller
     * @param interestRateModel_ The address of the interest rate model
     * @param initialExchangeRateMantissa_ The initial exchange rate, scaled by 1e18
     * @param name_ EIP-20 name of this token
     * @param symbol_ EIP-20 symbol of this token
     * @param decimals_ EIP-20 decimal precision of this token
     */
    function initialize(
        ComptrollerInterface comptroller_,
        InterestRateModel interestRateModel_,
        uint256 initialExchangeRateMantissa_,
        string memory name_,
        string memory symbol_,
        uint8 decimals_
    ) public {
        require(msg.sender == admin, "admin only");
        require(accrualBlockNumber == 0 && borrowIndex == 0, "market may only be initialized once");

        // Set initial exchange rate
        initialExchangeRateMantissa = initialExchangeRateMantissa_;
        require(initialExchangeRateMantissa > 0, "invalid exchange rate");

        // Set the comptroller
        uint256 err = _setComptroller(comptroller_);
        require(err == uint256(Error.NO_ERROR), "set comptroller failed");

        // Initialize block number and borrow index (block number mocks depend on comptroller being set)
        accrualBlockNumber = getBlockNumber();
        borrowIndex = mantissaOne;

        // Set the interest rate model (depends on block number / borrow index)
        err = _setInterestRateModelFresh(interestRateModel_);
        require(err == uint256(Error.NO_ERROR), "set IRM failed");

        name = name_;
        symbol = symbol_;
        decimals = decimals_;

        // The counter starts true to prevent changing it from zero to non-zero (i.e. smaller cost/refund)
        _notEntered = true;
    }

    /**
     * @notice Transfer `amount` tokens from `msg.sender` to `dst`
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transfer(address dst, uint256 amount) external nonReentrant returns (bool) {
        return transferTokens(msg.sender, msg.sender, dst, amount) == uint256(Error.NO_ERROR);
    }

    /**
     * @notice Transfer `amount` tokens from `src` to `dst`
     * @param src The address of the source account
     * @param dst The address of the destination account
     * @param amount The number of tokens to transfer
     * @return Whether or not the transfer succeeded
     */
    function transferFrom(
        address src,
        address dst,
        uint256 amount
    ) external nonReentrant returns (bool) {
        return transferTokens(msg.sender, src, dst, amount) == uint256(Error.NO_ERROR);
    }

    /**
     * @notice Approve `spender` to transfer up to `amount` from `src`
     * @dev This will overwrite the approval amount for `spender`
     *  and is subject to issues noted [here](https://eips.ethereum.org/EIPS/eip-20#approve)
     * @param spender The address of the account which may transfer tokens
     * @param amount The number of tokens that are approved (-1 means infinite)
     * @return Whether or not the approval succeeded
     */
    function approve(address spender, uint256 amount) external returns (bool) {
        address src = msg.sender;
        transferAllowances[src][spender] = amount;
        emit Approval(src, spender, amount);
        return true;
    }

    /**
     * @notice Get the current allowance from `owner` for `spender`
     * @param owner The address of the account which owns the tokens to be spent
     * @param spender The address of the account which may transfer tokens
     * @return The number of tokens allowed to be spent (-1 means infinite)
     */
    function allowance(address owner, address spender) external view returns (uint256) {
        return transferAllowances[owner][spender];
    }

    /**
     * @notice Get the token balance of the `owner`
     * @param owner The address of the account to query
     * @return The number of tokens owned by `owner`
     */
    function balanceOf(address owner) external view returns (uint256) {
        return accountTokens[owner];
    }

    /**
     * @notice Get the underlying balance of the `owner`
     * @dev This also accrues interest in a transaction
     * @param owner The address of the account to query
     * @return The amount of underlying owned by `owner`
     */
    function balanceOfUnderlying(address owner) external returns (uint256) {
        Exp memory exchangeRate = Exp({mantissa: exchangeRateCurrent()});
        return mul_ScalarTruncate(exchangeRate, accountTokens[owner]);
    }

    /**
     * @notice Get a snapshot of the account's balances, and the cached exchange rate
     * @dev This is used by comptroller to more efficiently perform liquidity checks.
     * @param account Address of the account to snapshot
     * @return (possible error, token balance, borrow balance, exchange rate mantissa)
     */
    function getAccountSnapshot(address account)
        external
        view
        returns (
            uint256,
            uint256,
            uint256,
            uint256
        )
    {
        uint256 cTokenBalance = getCTokenBalanceInternal(account);
        uint256 borrowBalance = borrowBalanceStoredInternal(account);
        uint256 exchangeRateMantissa = exchangeRateStoredInternal();

        return (uint256(Error.NO_ERROR), cTokenBalance, borrowBalance, exchangeRateMantissa);
    }

    /**
     * @dev Function to simply retrieve block number
     *  This exists mainly for inheriting test contracts to stub this result.
     */
    function getBlockNumber() internal view returns (uint256) {
        return block.number;
    }

    /**
     * @notice Returns the current per-block borrow interest rate for this cToken
     * @return The borrow interest rate per block, scaled by 1e18
     */
    function borrowRatePerBlock() external view returns (uint256) {
        return interestRateModel.getBorrowRate(getCashPrior(), totalBorrows, totalReserves);
    }

    /**
     * @notice Returns the current per-block supply interest rate for this cToken
     * @return The supply interest rate per block, scaled by 1e18
     */
    function supplyRatePerBlock() external view returns (uint256) {
        return interestRateModel.getSupplyRate(getCashPrior(), totalBorrows, totalReserves, reserveFactorMantissa);
    }

    /**
     * @notice Returns the estimated per-block borrow interest rate for this cToken after some change
     * @return The borrow interest rate per block, scaled by 1e18
     */
    function estimateBorrowRatePerBlockAfterChange(uint256 change, bool repay) external view returns (uint256) {
        uint256 cashPriorNew;
        uint256 totalBorrowsNew;

        if (repay) {
            cashPriorNew = add_(getCashPrior(), change);
            totalBorrowsNew = sub_(totalBorrows, change);
        } else {
            cashPriorNew = sub_(getCashPrior(), change);
            totalBorrowsNew = add_(totalBorrows, change);
        }
        return interestRateModel.getBorrowRate(cashPriorNew, totalBorrowsNew, totalReserves);
    }

    /**
     * @notice Returns the estimated per-block supply interest rate for this cToken after some change
     * @return The supply interest rate per block, scaled by 1e18
     */
    function estimateSupplyRatePerBlockAfterChange(uint256 change, bool repay) external view returns (uint256) {
        uint256 cashPriorNew;
        uint256 totalBorrowsNew;

        if (repay) {
            cashPriorNew = add_(getCashPrior(), change);
            totalBorrowsNew = sub_(totalBorrows, change);
        } else {
            cashPriorNew = sub_(getCashPrior(), change);
            totalBorrowsNew = add_(totalBorrows, change);
        }

        return interestRateModel.getSupplyRate(cashPriorNew, totalBorrowsNew, totalReserves, reserveFactorMantissa);
    }

    /**
     * @notice Returns the current total borrows plus accrued interest
     * @return The total borrows with interest
     */
    function totalBorrowsCurrent() external nonReentrant returns (uint256) {
        accrueInterest();
        return totalBorrows;
    }

    /**
     * @notice Accrue interest to updated borrowIndex and then calculate account's borrow balance using the updated borrowIndex
     * @param account The address whose balance should be calculated after updating borrowIndex
     * @return The calculated balance
     */
    function borrowBalanceCurrent(address account) external nonReentrant returns (uint256) {
        accrueInterest();
        return borrowBalanceStored(account);
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return The calculated balance
     */
    function borrowBalanceStored(address account) public view returns (uint256) {
        return borrowBalanceStoredInternal(account);
    }

    /**
     * @notice Return the borrow balance of account based on stored data
     * @param account The address whose balance should be calculated
     * @return the calculated balance or 0 if error code is non-zero
     */
    function borrowBalanceStoredInternal(address account) internal view returns (uint256) {
        /* Get borrowBalance and borrowIndex */
        BorrowSnapshot storage borrowSnapshot = accountBorrows[account];

        /* If borrowBalance = 0 then borrowIndex is likely also 0.
         * Rather than failing the calculation with a division by 0, we immediately return 0 in this case.
         */
        if (borrowSnapshot.principal == 0) {
            return 0;
        }

        /* Calculate new borrow balance using the interest index:
         *  recentBorrowBalance = borrower.borrowBalance * market.borrowIndex / borrower.borrowIndex
         */
        uint256 principalTimesIndex = mul_(borrowSnapshot.principal, borrowIndex);
        uint256 result = div_(principalTimesIndex, borrowSnapshot.interestIndex);
        return result;
    }

    /**
     * @notice Accrue interest then return the up-to-date exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateCurrent() public nonReentrant returns (uint256) {
        accrueInterest();
        return exchangeRateStored();
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the CToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return Calculated exchange rate scaled by 1e18
     */
    function exchangeRateStored() public view returns (uint256) {
        return exchangeRateStoredInternal();
    }

    /**
     * @notice Calculates the exchange rate from the underlying to the CToken
     * @dev This function does not accrue interest before calculating the exchange rate
     * @return calculated exchange rate scaled by 1e18
     */
    function exchangeRateStoredInternal() internal view returns (uint256) {
        uint256 _totalSupply = totalSupply;
        if (_totalSupply == 0) {
            /*
             * If there are no tokens minted:
             *  exchangeRate = initialExchangeRate
             */
            return initialExchangeRateMantissa;
        } else {
            /*
             * Otherwise:
             *  exchangeRate = (totalCash + totalBorrows - totalReserves) / totalSupply
             */
            uint256 totalCash = getCashPrior();
            uint256 cashPlusBorrowsMinusReserves = sub_(add_(totalCash, totalBorrows), totalReserves);
            uint256 exchangeRate = div_(cashPlusBorrowsMinusReserves, Exp({mantissa: _totalSupply}));
            return exchangeRate;
        }
    }

    /**
     * @notice Get cash balance of this cToken in the underlying asset
     * @return The quantity of underlying asset owned by this contract
     */
    function getCash() external view returns (uint256) {
        return getCashPrior();
    }

    /**
     * @notice Applies accrued interest to total borrows and reserves
     * @dev This calculates interest accrued from the last checkpointed block
     *   up to the current block and writes new checkpoint to storage.
     */
    function accrueInterest() public returns (uint256) {
        /* Remember the initial block number */
        uint256 currentBlockNumber = getBlockNumber();
        uint256 accrualBlockNumberPrior = accrualBlockNumber;

        /* Short-circuit accumulating 0 interest */
        if (accrualBlockNumberPrior == currentBlockNumber) {
            return uint256(Error.NO_ERROR);
        }

        /* Read the previous values out of storage */
        uint256 cashPrior = getCashPrior();
        uint256 borrowsPrior = totalBorrows;
        uint256 reservesPrior = totalReserves;
        uint256 borrowIndexPrior = borrowIndex;

        /* Calculate the current borrow interest rate */
        uint256 borrowRateMantissa = interestRateModel.getBorrowRate(cashPrior, borrowsPrior, reservesPrior);
        require(borrowRateMantissa <= borrowRateMaxMantissa, "borrow rate too high");

        /* Calculate the number of blocks elapsed since the last accrual */
        uint256 blockDelta = sub_(currentBlockNumber, accrualBlockNumberPrior);

        /*
         * Calculate the interest accumulated into borrows and reserves and the new index:
         *  simpleInterestFactor = borrowRate * blockDelta
         *  interestAccumulated = simpleInterestFactor * totalBorrows
         *  totalBorrowsNew = interestAccumulated + totalBorrows
         *  totalReservesNew = interestAccumulated * reserveFactor + totalReserves
         *  borrowIndexNew = simpleInterestFactor * borrowIndex + borrowIndex
         */

        Exp memory simpleInterestFactor = mul_(Exp({mantissa: borrowRateMantissa}), blockDelta);
        uint256 interestAccumulated = mul_ScalarTruncate(simpleInterestFactor, borrowsPrior);
        uint256 totalBorrowsNew = add_(interestAccumulated, borrowsPrior);
        uint256 totalReservesNew = mul_ScalarTruncateAddUInt(
            Exp({mantissa: reserveFactorMantissa}),
            interestAccumulated,
            reservesPrior
        );
        uint256 borrowIndexNew = mul_ScalarTruncateAddUInt(simpleInterestFactor, borrowIndexPrior, borrowIndexPrior);

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        accrualBlockNumber = currentBlockNumber;
        borrowIndex = borrowIndexNew;
        totalBorrows = totalBorrowsNew;
        totalReserves = totalReservesNew;

        /* We emit an AccrueInterest event */
        emit AccrueInterest(cashPrior, interestAccumulated, borrowIndexNew, totalBorrowsNew);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice Sender supplies assets into the market and receives cTokens in exchange
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param mintAmount The amount of the underlying asset to supply
     * @param isNative The amount is in native or not
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual mint amount.
     */
    function mintInternal(uint256 mintAmount, bool isNative) internal nonReentrant returns (uint256, uint256) {
        accrueInterest();
        // mintFresh emits the actual Mint event if successful and logs on errors, so we don't need to
        return mintFresh(msg.sender, mintAmount, isNative);
    }

    /**
     * @notice Sender redeems cTokens in exchange for the underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemTokens The number of cTokens to redeem into underlying
     * @param isNative The amount is in native or not
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemInternal(uint256 redeemTokens, bool isNative) internal nonReentrant returns (uint256) {
        accrueInterest();
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        return redeemFresh(msg.sender, redeemTokens, 0, isNative);
    }

    /**
     * @notice Sender redeems cTokens in exchange for a specified amount of underlying asset
     * @dev Accrues interest whether or not the operation succeeds, unless reverted
     * @param redeemAmount The amount of underlying to receive from redeeming cTokens
     * @param isNative The amount is in native or not
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function redeemUnderlyingInternal(uint256 redeemAmount, bool isNative) internal nonReentrant returns (uint256) {
        accrueInterest();
        // redeemFresh emits redeem-specific logs on errors, so we don't need to
        return redeemFresh(msg.sender, 0, redeemAmount, isNative);
    }

    /**
     * @notice Sender borrows assets from the protocol to their own address
     * @param borrowAmount The amount of the underlying asset to borrow
     * @param isNative The amount is in native or not
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function borrowInternal(uint256 borrowAmount, bool isNative) internal nonReentrant returns (uint256) {
        accrueInterest();
        // borrowFresh emits borrow-specific logs on errors, so we don't need to
        return borrowFresh(msg.sender, borrowAmount, isNative);
    }

    struct BorrowLocalVars {
        MathError mathErr;
        uint256 accountBorrows;
        uint256 accountBorrowsNew;
        uint256 totalBorrowsNew;
    }

    /**
     * @notice Users borrow assets from the protocol to their own address
     * @param borrowAmount The amount of the underlying asset to borrow
     * @param isNative The amount is in native or not
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function borrowFresh(
        address payable borrower,
        uint256 borrowAmount,
        bool isNative
    ) internal returns (uint256) {
        /* Fail if borrow not allowed */
        require(comptroller.borrowAllowed(address(this), borrower, borrowAmount) == 0, "rejected");

        /* Verify market's block number equals current block number */
        require(accrualBlockNumber == getBlockNumber(), "market is stale");

        /* Reverts if protocol has insufficient cash */
        require(getCashPrior() >= borrowAmount, "insufficient cash");

        BorrowLocalVars memory vars;

        /*
         * We calculate the new borrower and total borrow balances, failing on overflow:
         *  accountBorrowsNew = accountBorrows + borrowAmount
         *  totalBorrowsNew = totalBorrows + borrowAmount
         */
        vars.accountBorrows = borrowBalanceStoredInternal(borrower);
        vars.accountBorrowsNew = add_(vars.accountBorrows, borrowAmount);
        vars.totalBorrowsNew = add_(totalBorrows, borrowAmount);

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = vars.accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = vars.totalBorrowsNew;

        /*
         * We invoke doTransferOut for the borrower and the borrowAmount.
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the cToken borrowAmount less of cash.
         *  doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
         */
        doTransferOut(borrower, borrowAmount, isNative);

        /* We emit a Borrow event */
        emit Borrow(borrower, borrowAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);

        /* We call the defense hook */
        comptroller.borrowVerify(address(this), borrower, borrowAmount);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice Sender repays their own borrow
     * @param repayAmount The amount to repay
     * @param isNative The amount is in native or not
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function repayBorrowInternal(uint256 repayAmount, bool isNative) internal nonReentrant returns (uint256, uint256) {
        accrueInterest();
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        return repayBorrowFresh(msg.sender, msg.sender, repayAmount, isNative, false);
    }

    /**
     * @notice Sender repays a borrow belonging to borrower
     * @param borrower the account with the debt being payed off
     * @param repayAmount The amount to repay
     * @param isNative The amount is in native or not
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function repayBorrowBehalfInternal(
        address borrower,
        uint256 repayAmount,
        bool isNative
    ) internal nonReentrant returns (uint256, uint256) {
        accrueInterest();
        // repayBorrowFresh emits repay-borrow-specific logs on errors, so we don't need to
        return repayBorrowFresh(msg.sender, borrower, repayAmount, isNative, false);
    }

    struct RepayBorrowLocalVars {
        Error err;
        MathError mathErr;
        uint256 repayAmount;
        uint256 borrowerIndex;
        uint256 accountBorrows;
        uint256 accountBorrowsNew;
        uint256 totalBorrowsNew;
        uint256 actualRepayAmount;
    }

    /**
     * @notice Borrows are repaid by another user (possibly the borrower).
     * @param payer the account paying off the borrow
     * @param borrower the account with the debt being payed off
     * @param repayAmount the amount of undelrying tokens being returned
     * @param isNative The amount is in native or not
     * @param isFromLiquidation The request is from liquidation or not
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function repayBorrowFresh(
        address payer,
        address borrower,
        uint256 repayAmount,
        bool isNative,
        bool isFromLiquidation
    ) internal returns (uint256, uint256) {
        /* Fail if repayBorrow not allowed */
        require(comptroller.repayBorrowAllowed(address(this), payer, borrower, repayAmount) == 0, "rejected");

        /* Verify market's block number equals current block number */
        require(accrualBlockNumber == getBlockNumber(), "market is stale");

        RepayBorrowLocalVars memory vars;

        /* We remember the original borrowerIndex for verification purposes */
        vars.borrowerIndex = accountBorrows[borrower].interestIndex;

        /* We fetch the amount the borrower owes, with accumulated interest */
        vars.accountBorrows = borrowBalanceStoredInternal(borrower);

        /* If repayAmount == -1, repayAmount = accountBorrows */
        if (repayAmount == uint256(-1)) {
            vars.repayAmount = vars.accountBorrows;
        } else {
            vars.repayAmount = repayAmount;
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the payer and the repayAmount
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the cToken holds an additional repayAmount of cash.
         *  doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
         *   it returns the amount actually transferred, in case of a fee.
         */
        vars.actualRepayAmount = doTransferIn(payer, vars.repayAmount, isNative);

        // Only check account liquidity if the request is from liquidation to save gas.
        if (isFromLiquidation) {
            // Right after `doTransferIn` and before updating the storage, check the borrower's account liquidity again.
            // If a reentrant call to another asset is made during transferring AMP in, a second account liquidity check
            // could help prevent excessive liquidation.
            (uint256 err, , uint256 shortfall) = ComptrollerInterfaceExtension(address(comptroller))
                .getAccountLiquidity(borrower);
            require(err == 0, "failed to get account liquidity");
            require(shortfall > 0, "borrower has no shortfall");
        }

        /*
         * We calculate the new borrower and total borrow balances, failing on underflow:
         *  accountBorrowsNew = accountBorrows - actualRepayAmount
         *  totalBorrowsNew = totalBorrows - actualRepayAmount
         */
        vars.accountBorrowsNew = sub_(vars.accountBorrows, vars.actualRepayAmount);
        vars.totalBorrowsNew = sub_(totalBorrows, vars.actualRepayAmount);

        /* We write the previously calculated values into storage */
        accountBorrows[borrower].principal = vars.accountBorrowsNew;
        accountBorrows[borrower].interestIndex = borrowIndex;
        totalBorrows = vars.totalBorrowsNew;

        /* We emit a RepayBorrow event */
        emit RepayBorrow(payer, borrower, vars.actualRepayAmount, vars.accountBorrowsNew, vars.totalBorrowsNew);

        /* We call the defense hook */
        comptroller.repayBorrowVerify(address(this), payer, borrower, vars.actualRepayAmount, vars.borrowerIndex);

        return (uint256(Error.NO_ERROR), vars.actualRepayAmount);
    }

    /**
     * @notice The sender liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this cToken to be liquidated
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     * @param isNative The amount is in native or not
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function liquidateBorrowInternal(
        address borrower,
        uint256 repayAmount,
        CTokenInterface cTokenCollateral,
        bool isNative
    ) internal nonReentrant returns (uint256, uint256) {
        accrueInterest();
        require(cTokenCollateral.accrueInterest() == uint256(Error.NO_ERROR), "accrue interest failed");

        // liquidateBorrowFresh emits borrow-specific logs on errors, so we don't need to
        return liquidateBorrowFresh(msg.sender, borrower, repayAmount, cTokenCollateral, isNative);
    }

    struct LiquidateBorrowLocalVars {
        uint256 repayBorrowError;
        uint256 actualRepayAmount;
        uint256 amountSeizeError;
        uint256 seizeTokens;
    }

    /**
     * @notice The liquidator liquidates the borrowers collateral.
     *  The collateral seized is transferred to the liquidator.
     * @param borrower The borrower of this cToken to be liquidated
     * @param liquidator The address repaying the borrow and seizing collateral
     * @param cTokenCollateral The market in which to seize collateral from the borrower
     * @param repayAmount The amount of the underlying borrowed asset to repay
     * @param isNative The amount is in native or not
     * @return (uint, uint) An error code (0=success, otherwise a failure, see ErrorReporter.sol), and the actual repayment amount.
     */
    function liquidateBorrowFresh(
        address liquidator,
        address borrower,
        uint256 repayAmount,
        CTokenInterface cTokenCollateral,
        bool isNative
    ) internal returns (uint256, uint256) {
        /* Fail if liquidate not allowed */
        require(
            comptroller.liquidateBorrowAllowed(
                address(this),
                address(cTokenCollateral),
                liquidator,
                borrower,
                repayAmount
            ) == 0,
            "rejected"
        );

        /* Verify market's block number equals current block number */
        require(accrualBlockNumber == getBlockNumber(), "market is stale");

        /* Verify cTokenCollateral market's block number equals current block number */
        require(cTokenCollateral.accrualBlockNumber() == getBlockNumber(), "market is stale");

        /* Fail if borrower = liquidator */
        require(borrower != liquidator, "invalid account pair");

        /* Fail if repayAmount = 0 or repayAmount = -1 */
        require(repayAmount > 0 && repayAmount != uint256(-1), "invalid amount");

        LiquidateBorrowLocalVars memory vars;

        /* Fail if repayBorrow fails */
        (vars.repayBorrowError, vars.actualRepayAmount) = repayBorrowFresh(
            liquidator,
            borrower,
            repayAmount,
            isNative,
            true
        );
        require(vars.repayBorrowError == uint256(Error.NO_ERROR), "repay borrow failed");

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /* We calculate the number of collateral tokens that will be seized */
        (vars.amountSeizeError, vars.seizeTokens) = comptroller.liquidateCalculateSeizeTokens(
            address(this),
            address(cTokenCollateral),
            vars.actualRepayAmount
        );
        require(vars.amountSeizeError == uint256(Error.NO_ERROR), "calculate seize amount failed");

        /* Revert if borrower collateral token balance < seizeTokens */
        require(cTokenCollateral.balanceOf(borrower) >= vars.seizeTokens, "seize too much");

        // If this is also the collateral, run seizeInternal to avoid re-entrancy, otherwise make an external call
        uint256 seizeError;
        if (address(cTokenCollateral) == address(this)) {
            seizeError = seizeInternal(address(this), liquidator, borrower, vars.seizeTokens);
        } else {
            seizeError = cTokenCollateral.seize(liquidator, borrower, vars.seizeTokens);
        }

        /* Revert if seize tokens fails (since we cannot be sure of side effects) */
        require(seizeError == uint256(Error.NO_ERROR), "token seizure failed");

        /* We emit a LiquidateBorrow event */
        emit LiquidateBorrow(liquidator, borrower, vars.actualRepayAmount, address(cTokenCollateral), vars.seizeTokens);

        /* We call the defense hook */
        comptroller.liquidateBorrowVerify(
            address(this),
            address(cTokenCollateral),
            liquidator,
            borrower,
            vars.actualRepayAmount,
            vars.seizeTokens
        );

        return (uint256(Error.NO_ERROR), vars.actualRepayAmount);
    }

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Will fail unless called by another cToken during the process of liquidation.
     *  Its absolutely critical to use msg.sender as the borrowed cToken and not a parameter.
     * @param liquidator The account receiving seized collateral
     * @param borrower The account having collateral seized
     * @param seizeTokens The number of cTokens to seize
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function seize(
        address liquidator,
        address borrower,
        uint256 seizeTokens
    ) external nonReentrant returns (uint256) {
        return seizeInternal(msg.sender, liquidator, borrower, seizeTokens);
    }

    /*** Admin Functions ***/

    /**
     * @notice Begins transfer of admin rights. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
     * @dev Admin function to begin change of admin. The newPendingAdmin must call `_acceptAdmin` to finalize the transfer.
     * @param newPendingAdmin New pending admin.
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setPendingAdmin(address payable newPendingAdmin) external returns (uint256) {
        // Check caller = admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_PENDING_ADMIN_OWNER_CHECK);
        }

        // Save current value, if any, for inclusion in log
        address oldPendingAdmin = pendingAdmin;

        // Store pendingAdmin with value newPendingAdmin
        pendingAdmin = newPendingAdmin;

        // Emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin)
        emit NewPendingAdmin(oldPendingAdmin, newPendingAdmin);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice Accepts transfer of admin rights. msg.sender must be pendingAdmin
     * @dev Admin function for pending admin to accept role and update admin
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _acceptAdmin() external returns (uint256) {
        // Check caller is pendingAdmin and pendingAdmin ≠ address(0)
        if (msg.sender != pendingAdmin || msg.sender == address(0)) {
            return fail(Error.UNAUTHORIZED, FailureInfo.ACCEPT_ADMIN_PENDING_ADMIN_CHECK);
        }

        // Save current values for inclusion in log
        address oldAdmin = admin;
        address oldPendingAdmin = pendingAdmin;

        // Store admin with value pendingAdmin
        admin = pendingAdmin;

        // Clear the pending value
        pendingAdmin = address(0);

        emit NewAdmin(oldAdmin, admin);
        emit NewPendingAdmin(oldPendingAdmin, pendingAdmin);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice Sets a new comptroller for the market
     * @dev Admin function to set a new comptroller
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setComptroller(ComptrollerInterface newComptroller) public returns (uint256) {
        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_COMPTROLLER_OWNER_CHECK);
        }

        ComptrollerInterface oldComptroller = comptroller;
        // Ensure invoke comptroller.isComptroller() returns true
        require(newComptroller.isComptroller(), "not comptroller");

        // Set market's comptroller to newComptroller
        comptroller = newComptroller;

        // Emit NewComptroller(oldComptroller, newComptroller)
        emit NewComptroller(oldComptroller, newComptroller);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice accrues interest and sets a new reserve factor for the protocol using _setReserveFactorFresh
     * @dev Admin function to accrue interest and set a new reserve factor
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setReserveFactor(uint256 newReserveFactorMantissa) external nonReentrant returns (uint256) {
        accrueInterest();
        // _setReserveFactorFresh emits reserve-factor-specific logs on errors, so we don't need to.
        return _setReserveFactorFresh(newReserveFactorMantissa);
    }

    /**
     * @notice Sets a new reserve factor for the protocol (*requires fresh interest accrual)
     * @dev Admin function to set a new reserve factor
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setReserveFactorFresh(uint256 newReserveFactorMantissa) internal returns (uint256) {
        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_RESERVE_FACTOR_ADMIN_CHECK);
        }

        // Verify market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_RESERVE_FACTOR_FRESH_CHECK);
        }

        // Check newReserveFactor ≤ maxReserveFactor
        if (newReserveFactorMantissa > reserveFactorMaxMantissa) {
            return fail(Error.BAD_INPUT, FailureInfo.SET_RESERVE_FACTOR_BOUNDS_CHECK);
        }

        uint256 oldReserveFactorMantissa = reserveFactorMantissa;
        reserveFactorMantissa = newReserveFactorMantissa;

        emit NewReserveFactor(oldReserveFactorMantissa, newReserveFactorMantissa);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice Accrues interest and reduces reserves by transferring from msg.sender
     * @param addAmount Amount of addition to reserves
     * @param isNative The amount is in native or not
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _addReservesInternal(uint256 addAmount, bool isNative) internal nonReentrant returns (uint256) {
        accrueInterest();
        // _addReservesFresh emits reserve-addition-specific logs on errors, so we don't need to.
        (uint256 error, ) = _addReservesFresh(addAmount, isNative);
        return error;
    }

    /**
     * @notice Add reserves by transferring from caller
     * @dev Requires fresh interest accrual
     * @param addAmount Amount of addition to reserves
     * @param isNative The amount is in native or not
     * @return (uint, uint) An error code (0=success, otherwise a failure (see ErrorReporter.sol for details)) and the actual amount added, net token fees
     */
    function _addReservesFresh(uint256 addAmount, bool isNative) internal returns (uint256, uint256) {
        // totalReserves + actualAddAmount
        uint256 totalReservesNew;
        uint256 actualAddAmount;

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return (fail(Error.MARKET_NOT_FRESH, FailureInfo.ADD_RESERVES_FRESH_CHECK), actualAddAmount);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        /*
         * We call doTransferIn for the caller and the addAmount
         *  Note: The cToken must handle variations between ERC-20 and ETH underlying.
         *  On success, the cToken holds an additional addAmount of cash.
         *  doTransferIn reverts if anything goes wrong, since we can't be sure if side effects occurred.
         *  it returns the amount actually transferred, in case of a fee.
         */

        actualAddAmount = doTransferIn(msg.sender, addAmount, isNative);

        totalReservesNew = add_(totalReserves, actualAddAmount);

        // Store reserves[n+1] = reserves[n] + actualAddAmount
        totalReserves = totalReservesNew;

        /* Emit NewReserves(admin, actualAddAmount, reserves[n+1]) */
        emit ReservesAdded(msg.sender, actualAddAmount, totalReservesNew);

        /* Return (NO_ERROR, actualAddAmount) */
        return (uint256(Error.NO_ERROR), actualAddAmount);
    }

    /**
     * @notice Accrues interest and reduces reserves by transferring to admin
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReserves(uint256 reduceAmount) external nonReentrant returns (uint256) {
        accrueInterest();
        // _reduceReservesFresh emits reserve-reduction-specific logs on errors, so we don't need to.
        return _reduceReservesFresh(reduceAmount);
    }

    /**
     * @notice Reduces reserves by transferring to admin
     * @dev Requires fresh interest accrual
     * @param reduceAmount Amount of reduction to reserves
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _reduceReservesFresh(uint256 reduceAmount) internal returns (uint256) {
        // totalReserves - reduceAmount
        uint256 totalReservesNew;

        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.REDUCE_RESERVES_ADMIN_CHECK);
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.REDUCE_RESERVES_FRESH_CHECK);
        }

        // Fail gracefully if protocol has insufficient underlying cash
        if (getCashPrior() < reduceAmount) {
            return fail(Error.TOKEN_INSUFFICIENT_CASH, FailureInfo.REDUCE_RESERVES_CASH_NOT_AVAILABLE);
        }

        // Check reduceAmount ≤ reserves[n] (totalReserves)
        if (reduceAmount > totalReserves) {
            return fail(Error.BAD_INPUT, FailureInfo.REDUCE_RESERVES_VALIDATION);
        }

        /////////////////////////
        // EFFECTS & INTERACTIONS
        // (No safe failures beyond this point)

        totalReservesNew = sub_(totalReserves, reduceAmount);

        // Store reserves[n+1] = reserves[n] - reduceAmount
        totalReserves = totalReservesNew;

        // doTransferOut reverts if anything goes wrong, since we can't be sure if side effects occurred.
        // Restrict reducing reserves in native token. Implementations except `CWrappedNative` won't use parameter `isNative`.
        doTransferOut(admin, reduceAmount, true);

        emit ReservesReduced(admin, reduceAmount, totalReservesNew);

        return uint256(Error.NO_ERROR);
    }

    /**
     * @notice accrues interest and updates the interest rate model using _setInterestRateModelFresh
     * @dev Admin function to accrue interest and update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModel(InterestRateModel newInterestRateModel) public returns (uint256) {
        accrueInterest();
        // _setInterestRateModelFresh emits interest-rate-model-update-specific logs on errors, so we don't need to.
        return _setInterestRateModelFresh(newInterestRateModel);
    }

    /**
     * @notice updates the interest rate model (*requires fresh interest accrual)
     * @dev Admin function to update the interest rate model
     * @param newInterestRateModel the new interest rate model to use
     * @return uint 0=success, otherwise a failure (see ErrorReporter.sol for details)
     */
    function _setInterestRateModelFresh(InterestRateModel newInterestRateModel) internal returns (uint256) {
        // Used to store old model for use in the event that is emitted on success
        InterestRateModel oldInterestRateModel;

        // Check caller is admin
        if (msg.sender != admin) {
            return fail(Error.UNAUTHORIZED, FailureInfo.SET_INTEREST_RATE_MODEL_OWNER_CHECK);
        }

        // We fail gracefully unless market's block number equals current block number
        if (accrualBlockNumber != getBlockNumber()) {
            return fail(Error.MARKET_NOT_FRESH, FailureInfo.SET_INTEREST_RATE_MODEL_FRESH_CHECK);
        }

        // Track the market's current interest rate model
        oldInterestRateModel = interestRateModel;

        // Ensure invoke newInterestRateModel.isInterestRateModel() returns true
        require(newInterestRateModel.isInterestRateModel(), "invalid IRM");

        // Set the interest rate model to newInterestRateModel
        interestRateModel = newInterestRateModel;

        // Emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel)
        emit NewMarketInterestRateModel(oldInterestRateModel, newInterestRateModel);

        return uint256(Error.NO_ERROR);
    }

    /*** Safe Token ***/

    /**
     * @notice Gets balance of this contract in terms of the underlying
     * @dev This excludes the value of the current message, if any
     * @return The quantity of underlying owned by this contract
     */
    function getCashPrior() internal view returns (uint256);

    /**
     * @dev Performs a transfer in, reverting upon failure. Returns the amount actually transferred to the protocol, in case of a fee.
     *  This may revert due to insufficient balance or insufficient allowance.
     */
    function doTransferIn(
        address from,
        uint256 amount,
        bool isNative
    ) internal returns (uint256);

    /**
     * @dev Performs a transfer out, ideally returning an explanatory error code upon failure tather than reverting.
     *  If caller has not called checked protocol's balance, may revert due to insufficient cash held in the contract.
     *  If caller has checked protocol's balance, and verified it is >= amount, this should not revert in normal conditions.
     */
    function doTransferOut(
        address payable to,
        uint256 amount,
        bool isNative
    ) internal;

    /**
     * @notice Transfer `tokens` tokens from `src` to `dst` by `spender`
     * @dev Called by both `transfer` and `transferFrom` internally
     */
    function transferTokens(
        address spender,
        address src,
        address dst,
        uint256 tokens
    ) internal returns (uint256);

    /**
     * @notice Get the account's cToken balances
     */
    function getCTokenBalanceInternal(address account) internal view returns (uint256);

    /**
     * @notice User supplies assets into the market and receives cTokens in exchange
     * @dev Assumes interest has already been accrued up to the current block
     */
    function mintFresh(
        address minter,
        uint256 mintAmount,
        bool isNative
    ) internal returns (uint256, uint256);

    /**
     * @notice User redeems cTokens in exchange for the underlying asset
     * @dev Assumes interest has already been accrued up to the current block
     */
    function redeemFresh(
        address payable redeemer,
        uint256 redeemTokensIn,
        uint256 redeemAmountIn,
        bool isNative
    ) internal returns (uint256);

    /**
     * @notice Transfers collateral tokens (this market) to the liquidator.
     * @dev Called only during an in-kind liquidation, or by liquidateBorrow during the liquidation of another CToken.
     *  Its absolutely critical to use msg.sender as the seizer cToken and not a parameter.
     */
    function seizeInternal(
        address seizerToken,
        address liquidator,
        address borrower,
        uint256 seizeTokens
    ) internal returns (uint256);

    /*** Reentrancy Guard ***/

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     */
    modifier nonReentrant() {
        require(_notEntered, "re-entered");
        _notEntered = false;
        _;
        _notEntered = true; // get a gas-refund post-Istanbul
    }
}