diff --git a/test/integration/connect/envoy/case-property-override/setup.sh b/test/integration/connect/envoy/case-property-override/setup.sh
index 1bf2021c0c9ac..744055f94966f 100644
--- a/test/integration/connect/envoy/case-property-override/setup.sh
+++ b/test/integration/connect/envoy/case-property-override/setup.sh
@@ -53,12 +53,30 @@ EnvoyExtensions = [
           Path = "/upstream_connection_options/tcp_keepalive/keepalive_probes"
           Value = 1234
         },
+        {
+          ResourceFilter = {
+            ResourceType = "cluster"
+            TrafficDirection = "outbound"
+          }
+          Op = "add"
+          Path = "/outlier_detection/max_ejection_time/seconds"
+          Value = 120
+        },
+        {
+          ResourceFilter = {
+            ResourceType = "cluster"
+            TrafficDirection = "outbound"
+          }
+          Op = "add"
+          Path = "/outlier_detection/max_ejection_time_jitter/seconds"
+          Value = 1
+        },
         {
           ResourceFilter = {
             ResourceType = "cluster"
             TrafficDirection = "outbound"
             Services = [{
-              Name = "s2"
+              Name = "s3"
             }]
           }
           Op = "remove"
diff --git a/test/integration/connect/envoy/case-property-override/verify.bats b/test/integration/connect/envoy/case-property-override/verify.bats
index 4453409eede53..446ef061da418 100644
--- a/test/integration/connect/envoy/case-property-override/verify.bats
+++ b/test/integration/connect/envoy/case-property-override/verify.bats
@@ -19,13 +19,14 @@ load helpers
   [ "$status" == 0 ]
 
   [ "$(echo "$output" | jq -r '.upstream_connection_options.tcp_keepalive.keepalive_probes')" == "1234" ]
-  [ "$(echo "$output" | jq -r '.outlier_detection')" == "null" ]
+  [ "$(echo "$output" | jq -r '.outlier_detection.max_ejection_time')" == "120s" ]
+  [ "$(echo "$output" | jq -r '.outlier_detection.max_ejection_time_jitter')" == "1s" ]
 
   run get_envoy_cluster_config localhost:19000 s3
   [ "$status" == 0 ]
 
   [ "$(echo "$output" | jq -r '.upstream_connection_options.tcp_keepalive.keepalive_probes')" == "1234" ]
-  [ "$(echo "$output" | jq -r '.outlier_detection')" == "{}" ]
+  [ "$(echo "$output" | jq -r '.outlier_detection')" == "null" ]
 }
 
 @test "s2 proxy is configured with the expected envoy patches" {
diff --git a/website/content/docs/connect/proxies/envoy-extensions/configuration/property-override.mdx b/website/content/docs/connect/proxies/envoy-extensions/configuration/property-override.mdx
index f88cd476a0bd0..28e54f27eec10 100644
--- a/website/content/docs/connect/proxies/envoy-extensions/configuration/property-override.mdx
+++ b/website/content/docs/connect/proxies/envoy-extensions/configuration/property-override.mdx
@@ -46,13 +46,14 @@ Patches = [
       TrafficDirection = "<inbound or outbound>"
       Services = [
         {
-          Name = "<name of service to filter for>", 
+          Name = "<name of service to filter for>"
           Namespace = "<Consul namespace containing the service>"
           Partition = "<Consul partition containing the service>"
         }
       ]
-    Op = "<add or remove>",
-    Path = "<path/to/field>",
+    }
+    Op = "<add or remove>"
+    Path = "</path/to/field>"
     Value = "<values or map of field-values>"
   }
 ]
@@ -160,9 +161,9 @@ If Envoy specifies a wrapper as the target field type, the extension automatical
 
 The following examples demonstrate patterns that you may be able to model your configurations on.
 
-### Enable `enforcing_consecutive_5xx` outlier detection 
+### Enable `respect_dns_ttl` in a cluster
 
-In the following example, the `add` operation patches an outlier detection property into outbound cluster traffic. The `Path` specifies the `enforcing_consecutive_5xx` interface and sets a value of `1234`:
+In the following example, the `add` operation patches the outbound cluster corresponding to the `other-svc` upstream service to enable `respect_dns_ttl`. The `Path` specifies the [Cluster `/respect_dns_ttl`](https://www.envoyproxy.io/docs/envoy/latest/api-v3/config/cluster/v3/cluster.proto#envoy-v3-api-field-config-cluster-v3-cluster-respect-dns-ttl) top-level field and `Value` specifies a value of `true`:
 
 ```hcl
 Kind = "service-defaults"
@@ -183,8 +184,8 @@ EnvoyExtensions = [
             },
           },
           "Op" = "add",
-          "Path" =  "/outlier_detection/enforcing_consecutive_5xx",
-          "Value" = 1234,
+          "Path" =  "/respect_dns_ttl",
+          "Value" = true,
         }
       ]
     }
@@ -192,9 +193,9 @@ EnvoyExtensions = [
 ]
 ```
 
-### Update multiple values in the default map
+### Update multiple values in a message field
 
-In the following example, two `ResourceFilter` blocks target outbound traffic to the `db` service and add `/outlier_detection/enforcing_consecutive_5xx` and `/outlier_detection/failure_percentage_request_volume` properties:
+In the following example, both `ResourceFilter` blocks target the cluster corresponding to the `other-svc` upstream service and modify [Cluster `/outlier_detection`](https://www.envoyproxy.io/docs/envoy/latest/api-v3/config/cluster/v3/outlier_detection.proto) properties:
 
 ```hcl
 Kind = "service-defaults"
@@ -208,27 +209,27 @@ EnvoyExtensions = [
       Patches = [
         {
           ResourceFilter = {
-            ResourceType = "cluster",
-            TrafficDirection = "outbound",
+            ResourceType = "cluster"
+            TrafficDirection = "outbound"
             Services = [{
               Name = "other-svc"
-            }],
-          },
-          Op = "add",
-          Path =  "/outlier_detection/enforcing_consecutive_5xx",
-          Value = 1234,
+            }]
+          }
+          Op = "add"
+          Path = "/outlier_detection/max_ejection_time/seconds"
+          Value = 120
         },
         {
           ResourceFilter = {
-            ResourceType = "cluster",
-            TrafficDirection = "outbound",
+            ResourceType = "cluster"
+            TrafficDirection = "outbound"
             Services = [{
               Name = "other-svc"
-            }],
-          },
-          Op = "add",
-          Path =  "/outlier_detection/failure_percentage_request_volume",
-          Value = 2345,
+            }]
+          }
+          Op = "add"
+          Path = "/outlier_detection/max_ejection_time_jitter/seconds"
+          Value = 1
         }
       ]
     }
@@ -236,9 +237,13 @@ EnvoyExtensions = [
 ]
 ```
 
-### Set multiple values that replace the map
+The use of `/seconds` in these examples corresponds to the same field in the [google.protobuf.Duration](https://github.com/protocolbuffers/protobuf/blob/main/src/google/protobuf/duration.proto) proto definition, since the extension does not support JSON serialized string forms of common protobuf types (e.g. `120s`).
+
+-> **Note:** Using separate patches per field preserves any existing configuration of other fields in `outlier_detection` that may be directly set by Consul, such as [`enforcing_consecutive_5xx`](https://developer.hashicorp.com/consul/docs/connect/proxies/envoy#enforcing_consecutive_5xx).
+
+### Replace a message field
 
-In the following example, a `ResourceFilter` targets outbound traffic to the `db` service and replaces the map of properties located at `/outlier_detection` with `enforcing_consecutive_5xx` and `failure_percentage_request_volume` and properties:
+In the following example, a `ResourceFilter` targets the cluster corresponding to the `other-svc` upstream service and _replaces_ the entire map of properties located at `/outlier_detection`, including explicitly set `enforcing_success_rate` and `success_rate_minimum_hosts` properties:
 
 ```hcl
 Kind = "service-defaults"
@@ -246,27 +251,29 @@ Name = "my-svc"
 Protocol = "http"
 EnvoyExtensions = [
   {
-    Name = "builtin/property-override",
+    Name = "builtin/property-override"
     Arguments = {
-      ProxyType = "connect-proxy",
+      ProxyType = "connect-proxy"
       Patches = [
         {
           ResourceFilter = {
-            ResourceType = "cluster",
-            TrafficDirection = "outbound",
+            ResourceType = "cluster"
+            TrafficDirection = "outbound"
             Services = [{
               Name = "other-svc"
-            }],
-          },
-          Op = "add",
-          Path =  "/outlier_detection",
+            }]
+          }
+          Op = "add"
+          Path =  "/outlier_detection"
           Value = {
-            "enforcing_consecutive_5xx" = 1234,
-            "failure_percentage_request_volume" = 2345,
-          },
+            "enforcing_success_rate" = 80
+            "success_rate_minimum_hosts" = 2
+          }
         }
       ]
     }
   }
 ]
 ```
+
+Unlike the previous example, other `/outlier_detection` values set by Consul will _not_ be retained unless they match Envoy's defaults, because the entire value of `/outlier_detection` will be replaced.
diff --git a/website/content/docs/connect/proxies/envoy-extensions/usage/property-override.mdx b/website/content/docs/connect/proxies/envoy-extensions/usage/property-override.mdx
index 8055402657879..fbe0c357a3098 100644
--- a/website/content/docs/connect/proxies/envoy-extensions/usage/property-override.mdx
+++ b/website/content/docs/connect/proxies/envoy-extensions/usage/property-override.mdx
@@ -23,9 +23,9 @@ Add Envoy extension configurations to a proxy defaults or service defaults confi
 - When you configure Envoy extensions on proxy defaults, they apply to every service.
 - When you configure Envoy extensions on service defaults, they apply to a specific service.
 
-Consul applies Envoy extensions configured in proxy defaults before it applies extensions in service defaults. As a result, the Envoy extension configuration in service defaults may  override configurations in proxy defaults.
+Consul applies Envoy extensions configured in proxy defaults before it applies extensions in service defaults. As a result, the Envoy extension configuration in service defaults may override configurations in proxy defaults.
 
-In the following service defaults configuration entry example, Consul adds a new `/upstream_connection_options/tcp_keepalive/keepalive_probes-5` field to each of the proxy's cluster configuration for the outbound `db`service upstream. The configuration applies to all `connect-proxy` proxies with services configured to communicate over HTTP:
+In the following proxy defaults configuration entry example, Consul sets the `/respect_dns_ttl` field on the `api` service proxy's cluster configuration for the `other-svc` upstream service:
 
 <Tabs>
 <Tab heading="HCL" group="hcl">
@@ -33,7 +33,7 @@ In the following service defaults configuration entry example, Consul adds a new
 
 ```hcl
 Kind     = "service-defaults"
-Name     = "global"
+Name     = "api"
 Protocol = "http"
 EnvoyExtensions = [ 
   {
@@ -50,8 +50,8 @@ EnvoyExtensions = [
             }]
           }
           Op    = "add"
-          Path  = "/upstream_connection_options/tcp_keepalive/keepalive_probes"
-          Value = 5
+          Path  = "/respect_dns_ttl"
+          Value = true
         }
       ]
     }
@@ -66,9 +66,9 @@ EnvoyExtensions = [
 
 ```json
 "kind": "service-defaults",
-"name": "global",
+"name": "api",
 "protocol": "http",
-"envoy_extensions": [{
+"envoyExtensions": [{
   "name": "builtin/property-override",
   "arguments": {
     "proxyType": "connect-proxy",
@@ -76,11 +76,11 @@ EnvoyExtensions = [
       "resourceFilter": {
         "resourceType": "cluster", 
         "trafficDirection": "outbound",
-        "services": [{ "name":  "other-svc" }],
-        "op": "add",
-        "path": "/upstream_connection_options/tcp_keepalive/keepalive_probes",
-        "value": 5
-       }
+        "services": [{ "name":  "other-svc" }]
+      },
+      "op": "add",
+      "path": "/respect_dns_ttl",
+      "value": true
     }]
   }
 }]
@@ -88,13 +88,13 @@ EnvoyExtensions = [
 </CodeBlockConfig>
 </Tab>
 <Tab heading="Kubernetes" group="kubernetes">
-<CodeBlockConfig filename="property-override-extension-proxy-defaults.yaml">
+<CodeBlockConfig filename="property-override-extension-service-defaults.yaml">
 
 ```yaml
 apiversion: consul.hashicorp.com/v1alpha1
 kind: ServiceDefaults
 metadata:
-  name: global
+  name: api
 spec:
   protocol: http
   envoyExtensions:
@@ -108,8 +108,8 @@ spec:
           services: 
             - name:  "other-svc"
         op: "add"
-        path: "/upstream_connection_options/tcp_keepalive/keepalive_probes",
-        value: 5
+        path: "/respect_dns_ttl",
+        value: true
 ```
 
 </CodeBlockConfig>
@@ -136,6 +136,7 @@ EnvoyExtensions = [
   {
     Name = "builtin/property-override"
     Arguments = {
+      Debug = true
       ProxyType = "connect-proxy"
       Patches = [
         {
@@ -146,7 +147,7 @@ EnvoyExtensions = [
           Op = "add"
           Path =  ""
           Value =  5
-         }
+        }
       ]
     }
   }
@@ -157,19 +158,23 @@ After applying the configuration entry, Consul prints a message that includes th
 
 ```shell-session
 $ consul config write api.hcl
-non-empty, non-root Path is required. available cluster fields:
-/outlier_detection
-/outlier_detection/enforcing_consecutive_5xx
-/outlier_detection/failure_percentage_request_volume
-/round_robin_lb_config
-/round_robin_lb_config/slow_start_config
+non-empty, non-root Path is required;
+available envoy.config.cluster.v3.Cluster fields:
+transport_socket_matches
+name
+alt_stat_name
+type
+cluster_type
+eds_cluster_config
+connect_timeout
+...
 ```
 
 You can use the output to help you construct the appropriate value for the `Path` field. For example:
 
 ```shell-session
-$ consul config write api.hcl | grep round_robin
-/round_robin_lb_config
+$ consul config write api.hcl 2>&1 | grep round_robin
+round_robin_lb_config
 ```