-
Notifications
You must be signed in to change notification settings - Fork 23
/
README.isotp
286 lines (200 loc) · 11.2 KB
/
README.isotp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
============================================================================
CAN ISO-TP has moved to https://github.com/hartkopp/can-isotp.git
This repository is not maintained anymore.
============================================================================
README.isotp
DOWNLOAD and BUILD
1. Download repository
git clone https://github.com/hartkopp/can-isotp-modules.git
2. Build ISO-TP kernel module
cd can-isotp-modules/net/can
./make_isotp.sh
Remark: The other CAN sources are out of date and will not compile with
recent Linux versions. make_isotp.sh compiles can-isotp.ko only.
3. When the PF_CAN core module is loaded ('modprobe can') the ISO-TP module
can be loaded into the kernel with
insmod ./can-isotp.ko
----------------------------------------------------------------------------
Readme file for ISO 15765-2 CAN transport protocol for protocol family CAN
* WARNING: This is ALPHA code for discussions and first tests that should
* not be used in production environments.
*
* In the discussion the Socket-API to the userspace or the ISO-TP socket
* options or the return values we may change! Current behaviour:
*
* - no ISO-TP specific return values are provided to the userspace
* - when a transfer (tx) is on the run the next write() blocks until it's done
* - no support for sending wait frames to the data source in the rx path
1 What is ISO-TP for CAN
2 Tools and Examples
2.1 isotpsend - send PDUs from stdin to CAN
2.2 isotprecv - print received PDU on stdout
2.3 isotpdump - dump CAN frames with PCI decoding (using CAN_RAW socket)
2.4 isotpsniffer - dump reassembled ISO-TP PDUs (using CAN_ISOTP socket)
2.5 isotptun - create an IP tunnel over unreliable ISO-TP PDUs
3 Remarks
3.1 tx_queue_len on real CAN busses (!!!)
3.2 State of the Socket API & Discussion
1 What is ISO-TP for CAN
------------------------
CAN Transport Protocols offer support for segmented Point-to-Point
communication between CAN nodes via two defined CAN Identifiers.
This protocol driver implements data transfers according ISO 15765-2.
CAN ISO-TP is an unreliable datagram protocol and is implemented like this.
For that reason error indications, like 'dropped PDUs in the receive path due
to wrong SequenceNumbers' are intentionally not supported.
See discussion in section 3.2
Code examples of how to use ISO-TP sockets can be found in the source code
of the available tools described below. The API is still a RFC and will be
described in detail later, when it's finalized.
2 Tools and Examples
--------------------
The source code of these tools can be found in the BerliOS SVN repository
http://developer.berlios.de/svn/?group_id=6475 in trunk/can-utils
For the examples below we assume a test setup with two hosts:
_______ _______
| | | |
| Host1 | | Host2 |
| | | |
| can1 | | can2 |
|_______| |_______|
| |
|------------------------------| CAN bus
2.1 isotpsend - send PDUs from stdin to CAN
isotpsend gives this help when invoked without any parameters:
Usage: isotpsend [options] <CAN interface>
Options: -s <can_id> (source can_id. Use 8 digits for extended IDs)
-d <can_id> (destination can_id. Use 8 digits for extended IDs)
-x <addr> (extended addressing mode. Use 'any' for all addresses)
-p <byte> (set and enable padding byte)
-P <mode> (check padding in FC. (l)ength (c)ontent (a)ll)
-t <time ns> (transmit time in nanosecs)
CAN IDs and addresses are given and expected in hexadecimal values.
The pdu data is expected on STDIN in space separated ASCII hex values.
Example (send ISOTP PDU from Host2 to Host1):
echo 11 22 33 44 55 66 DE AD BE EF | isotpsend -s 321 -d 123 can2
2.2 isotprecv - print received PDU on stdout
isotpsend gives this help when invoked without any parameters:
Usage: isotprecv [options] <CAN interface>
Options: -s <can_id> (source can_id. Use 8 digits for extended IDs)
-d <can_id> (destination can_id. Use 8 digits for extended IDs)
-x <addr> (extended addressing mode.)
-p <byte> (set and enable padding byte)
-P <mode> (check padding in SF/CF. (l)ength (c)ontent (a)ll)
-b <bs> (blocksize. 0 = off)
-m <val> (STmin in ms/ns. See spec.)
-w <num> (max. wait frame transmissions.)
-l (loop: do not exit after pdu receiption.)
CAN IDs and addresses are given and expected in hexadecimal values.
The pdu data is written on STDOUT in space separated ASCII hex values.
Example (receive ISOTP PDU from Host2 on Host1):
isotprecv -s 123 -d 321 -l can1
In this example '-l' is set which causes isotprecv to continue listening on
the given connection after printing a received PDU.
2.3 isotpdump - dump CAN frames with PCI decoding (using CAN_RAW socket)
isotpdump gives this help when invoked without any parameters:
Usage: isotpdump [options] <CAN interface>
Options: -s <can_id> (source can_id. Use 8 digits for extended IDs)
-d <can_id> (destination can_id. Use 8 digits for extended IDs)
-x <addr> (extended addressing mode. Use 'any' for all addresses)
-c (color mode)
-a (print data also in ASCII-chars)
-t <type> (timestamp: (a)bsolute/(d)elta/(z)ero/(A)bsolute w date)
CAN IDs and addresses are given and expected in hexadecimal values.
Example (dump CAN Frames on Host1):
isotpdump -s 123 -d 321 -c -ta can1
2.4 isotpsniffer - dump reassembled ISO-TP PDUs (using CAN_ISOTP socket)
The difference to isotpdump is, that isotpsniffer opens two CAN_ISOTP
sockets and sets the CAN_ISOTP_LISTEN_MODE flag on both of these sockets.
This causes the ISO-TP protocol driver to reassemble the received data but
not send and flow control frames on the CAN bus.
isotpsniffer gives this help when invoked without any parameters:
Usage: isotpsniffer [options] <CAN interface>
Options: -s <can_id> (source can_id. Use 8 digits for extended IDs)
-d <can_id> (destination can_id. Use 8 digits for extended IDs)
-x <addr> (extended addressing mode.)
-c (color mode)
-t <type> (timestamp: (a)bsolute/(d)elta/(z)ero/(A)bsolute w date)
-f <format> (1 = HEX, 2 = ASCII, 3 = HEX & ASCII - default: 3)
-h <len> (head: print only first <len> bytes)
CAN IDs and addresses are given and expected in hexadecimal values.
Example (dump reassembled ISO-TP PDUs on Host1):
isotpsniffer -s 123 -d 321 -c -ta can1
2.5 isotptun - create an IP tunnel over unreliable ISO-TP PDUs
The ISO-TP provides an unreliable datagram protocol with PDU sizes up to
4095 bytes. Having Linux tunnel driver in mind creating an IP over ISO-TP
tunnel became obvious - so here it is ;-)
From linux/Documentation/networking/tuntap.txt:
TUN/TAP provides packet reception and transmission for user space programs.
It can be seen as a simple Point-to-Point or Ethernet device, which,
instead of receiving packets from physical media, receives them from
user space program and instead of sending packets via physical media
writes them to the user space program.
isotptun gives this help when invoked without any parameters:
Usage: isotptun [options] <CAN interface>
This program creates a Linux tunnel netdevice 'ctunX' and transfers the
ethernet frames inside ISO15765-2 (unreliable) datagrams on CAN.
Options: -s <can_id> (source can_id. Use 8 digits for extended IDs)
-d <can_id> (destination can_id. Use 8 digits for extended IDs)
-x <addr> (extended addressing mode.)
-p <byte> (padding byte rx path)
-q <byte> (padding byte tx path)
-P <mode> (check padding. (l)ength (c)ontent (a)ll)
-t <time ns> (transmit time in nanosecs)
-b <bs> (blocksize. 0 = off)
-m <val> (STmin in ms/ns. See spec.)
-w <num> (max. wait frame transmissions.)
-h (half duplex mode.)
-v (verbose mode. Print symbols for tunneled msgs.)
CAN IDs and addresses are given and expected in hexadecimal values.
Use e.g. 'ifconfig ctun0 123.123.123.1 pointopoint 123.123.123.2 up'
to create a point-to-point IP connection on CAN.
Example:
on Host1 run as root:
isotptun -s 123 -d 321 -v can1 (this blocks, so use a separate terminal)
ifconfig ctun0 123.123.123.1 pointopoint 123.123.123.2 up
on Host2 run as root:
isotptun -s 321 -d 123 -v can2 (this blocks, so use a separate terminal)
ifconfig ctun0 123.123.123.2 pointopoint 123.123.123.1 up
Have fun (like in early modem dialup days):
ping 123.123.123.1
ssh user@123.123.123.1
scp user@123.123.123.1:myfile.tar.gz .
scp get's about 27kByte/s over a 500kbit/s CAN interface.
3 Remarks
---------
3.1 tx_queue_len on real CAN busses (!!!)
The blocksize (BS) splits the CAN frame stream into chunks that need to be
acknowledged on the receiver side with a flow control frame. In the case
the blocksize is set to zero the protocol does not wait for flow control
frames and sends all the CAN frames for the ISO-TP PDU in one burst.
In the case of a 4095 bytes PDU the protocol driver must create 586(!)
CAN frames, that are pushed into the CAN network device. This is no problem
with virtual CAN devices (vcan) but for real CAN devices with real bus
timings. Even though the frame_txtime (N_As/N_Ar) can be set in the ISO-TP
socket options, it is recommended to have an appropriate tx queue available
in the CAN driver, e.g.:
echo 4000 > /sys/class/net/can0/tx_queue_len
or with the 'ip' tool from the iproute2 package
ip link set can0 txqueuelen 4000
3.2 State of the Socket API for this Linux CAN ISO-TP implementation
Implementing transport protocol drivers in userspace on top of a CAN_RAW
socket is possible but has massive drawbacks for fullfilling timing
constrains and multi-user handling. Implementing a CAN transport protocol
inside the Kernel brings different requirements, as ...
- it needs to fit into a standard socket API
- datagram sockets should always behave similar (e.g. like UDP/IP)
- reduce user interaction to a minimal absolutely required level
- reduce user programming interface to a minimal absolutely required level
In the real world applications using unreliable datagram protocols recognize
problems via timeouts. So do ISO-TP applications. So the questions is:
What does it help for the application to know, that someone 'dropped a PDU
in the receive path due to wrong SequenceNumbers'?
The application does not know the (so far received) content and therefore
gets this completely useless information to do *what* with it?
From current applications perspective the things that have not been
implemented have not been required so far. So this might become the
discussion upon this implementation:
- what is really needed and for what use-case?
- how does this fit into standard networking and socket philosophy?
Oliver Hartkopp (2008-11-05)