diff --git a/.github/workflows/native-image-include-metadata.yml b/.github/workflows/native-image-include-metadata.yml
new file mode 100644
index 000000000..5c383ec45
--- /dev/null
+++ b/.github/workflows/native-image-include-metadata.yml
@@ -0,0 +1,32 @@
+name: native-image/include-metadata
+on:
+  push:
+    paths:
+      - 'native-image/include-metadata/**'
+      - '.github/workflows/native-image-include-metadata.yml'
+  pull_request:
+    paths:
+      - 'native-image/include-metadata/**'
+      - '.github/workflows/native-image-include-metadata.yml'
+  schedule:
+    - cron: "0 0 1 * *" # run every month
+  workflow_dispatch:
+permissions:
+  contents: read
+jobs:
+  run:
+    name: Run 'native-image/include-metadata
+    runs-on: ubuntu-latest
+    timeout-minutes: 15
+    steps:
+      - uses: actions/checkout@v4
+      - uses: graalvm/setup-graalvm@v1
+        with:
+          java-version: '21'
+          distribution: 'graalvm'
+          github-token: ${{ secrets.GITHUB_TOKEN }}
+          native-image-job-reports: 'true'
+      - name: Run 'native-image/include-metadata'
+        run: |
+          cd native-image/include-metadata
+          ./run.sh
\ No newline at end of file
diff --git a/native-image/include-metadata/.gitignore b/native-image/include-metadata/.gitignore
new file mode 100644
index 000000000..33b7188d1
--- /dev/null
+++ b/native-image/include-metadata/.gitignore
@@ -0,0 +1,3 @@
+data/
+target/
+src/main/resources/META-INF/native-image/
\ No newline at end of file
diff --git a/native-image/include-metadata/.mvn/wrapper/maven-wrapper.jar b/native-image/include-metadata/.mvn/wrapper/maven-wrapper.jar
new file mode 100644
index 000000000..cb28b0e37
Binary files /dev/null and b/native-image/include-metadata/.mvn/wrapper/maven-wrapper.jar differ
diff --git a/native-image/include-metadata/.mvn/wrapper/maven-wrapper.properties b/native-image/include-metadata/.mvn/wrapper/maven-wrapper.properties
new file mode 100644
index 000000000..a6cd062b9
--- /dev/null
+++ b/native-image/include-metadata/.mvn/wrapper/maven-wrapper.properties
@@ -0,0 +1,18 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.8.5/apache-maven-3.8.5-bin.zip
+wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar
diff --git a/native-image/include-metadata/README.md b/native-image/include-metadata/README.md
new file mode 100644
index 000000000..9be716bf7
--- /dev/null
+++ b/native-image/include-metadata/README.md
@@ -0,0 +1,5 @@
+# Include Reachability Metadata
+
+You can find the steps to run this demo on the website:
+- [Include Reachability Metadata Using the Native Image Maven Plugin](https://www.graalvm.org/latest/reference-manual/native-image/guides/use-reachability-metadata-repository-maven/)
+- [Include Reachability Metadata Using the Native Image Gradle Plugin](https://www.graalvm.org/latest/reference-manual/native-image/guides/use-reachability-metadata-repository-gradle/)
\ No newline at end of file
diff --git a/native-image/include-metadata/build.gradle b/native-image/include-metadata/build.gradle
new file mode 100644
index 000000000..5d6931690
--- /dev/null
+++ b/native-image/include-metadata/build.gradle
@@ -0,0 +1,32 @@
+plugins {
+    id 'application'
+    // 1. Native Image Gradle plugin
+    id 'org.graalvm.buildtools.native' version '0.10.3'
+}
+
+repositories {
+    mavenCentral()
+}
+
+// 2. Application main class
+application {
+    mainClass.set('org.graalvm.example.H2Example')
+}
+
+dependencies {
+    // 3. H2 Database dependency
+    implementation("com.h2database:h2:2.2.220")
+}
+
+// 4. Native Image build configuration
+graalvmNative {
+    binaries {
+        main {
+            imageName.set('h2example')
+            buildArgs.add("-Ob")
+        }
+    }
+    agent {
+        defaultMode = "standard"
+    }
+}
\ No newline at end of file
diff --git a/native-image/include-metadata/gradle/wrapper/gradle-wrapper.jar b/native-image/include-metadata/gradle/wrapper/gradle-wrapper.jar
new file mode 100644
index 000000000..d64cd4917
Binary files /dev/null and b/native-image/include-metadata/gradle/wrapper/gradle-wrapper.jar differ
diff --git a/native-image/include-metadata/gradle/wrapper/gradle-wrapper.properties b/native-image/include-metadata/gradle/wrapper/gradle-wrapper.properties
new file mode 100644
index 000000000..a80b22ce5
--- /dev/null
+++ b/native-image/include-metadata/gradle/wrapper/gradle-wrapper.properties
@@ -0,0 +1,7 @@
+distributionBase=GRADLE_USER_HOME
+distributionPath=wrapper/dists
+distributionUrl=https\://services.gradle.org/distributions/gradle-8.6-bin.zip
+networkTimeout=10000
+validateDistributionUrl=true
+zipStoreBase=GRADLE_USER_HOME
+zipStorePath=wrapper/dists
diff --git a/native-image/include-metadata/gradlew b/native-image/include-metadata/gradlew
new file mode 100755
index 000000000..1aa94a426
--- /dev/null
+++ b/native-image/include-metadata/gradlew
@@ -0,0 +1,249 @@
+#!/bin/sh
+
+#
+# Copyright © 2015-2021 the original authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+##############################################################################
+#
+#   Gradle start up script for POSIX generated by Gradle.
+#
+#   Important for running:
+#
+#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
+#       noncompliant, but you have some other compliant shell such as ksh or
+#       bash, then to run this script, type that shell name before the whole
+#       command line, like:
+#
+#           ksh Gradle
+#
+#       Busybox and similar reduced shells will NOT work, because this script
+#       requires all of these POSIX shell features:
+#         * functions;
+#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
+#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
+#         * compound commands having a testable exit status, especially «case»;
+#         * various built-in commands including «command», «set», and «ulimit».
+#
+#   Important for patching:
+#
+#   (2) This script targets any POSIX shell, so it avoids extensions provided
+#       by Bash, Ksh, etc; in particular arrays are avoided.
+#
+#       The "traditional" practice of packing multiple parameters into a
+#       space-separated string is a well documented source of bugs and security
+#       problems, so this is (mostly) avoided, by progressively accumulating
+#       options in "$@", and eventually passing that to Java.
+#
+#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
+#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
+#       see the in-line comments for details.
+#
+#       There are tweaks for specific operating systems such as AIX, CygWin,
+#       Darwin, MinGW, and NonStop.
+#
+#   (3) This script is generated from the Groovy template
+#       https://github.com/gradle/gradle/blob/HEAD/subprojects/plugins/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
+#       within the Gradle project.
+#
+#       You can find Gradle at https://github.com/gradle/gradle/.
+#
+##############################################################################
+
+# Attempt to set APP_HOME
+
+# Resolve links: $0 may be a link
+app_path=$0
+
+# Need this for daisy-chained symlinks.
+while
+    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
+    [ -h "$app_path" ]
+do
+    ls=$( ls -ld "$app_path" )
+    link=${ls#*' -> '}
+    case $link in             #(
+      /*)   app_path=$link ;; #(
+      *)    app_path=$APP_HOME$link ;;
+    esac
+done
+
+# This is normally unused
+# shellcheck disable=SC2034
+APP_BASE_NAME=${0##*/}
+# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
+APP_HOME=$( cd "${APP_HOME:-./}" > /dev/null && pwd -P ) || exit
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD=maximum
+
+warn () {
+    echo "$*"
+} >&2
+
+die () {
+    echo
+    echo "$*"
+    echo
+    exit 1
+} >&2
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+nonstop=false
+case "$( uname )" in                #(
+  CYGWIN* )         cygwin=true  ;; #(
+  Darwin* )         darwin=true  ;; #(
+  MSYS* | MINGW* )  msys=true    ;; #(
+  NONSTOP* )        nonstop=true ;;
+esac
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD=$JAVA_HOME/jre/sh/java
+    else
+        JAVACMD=$JAVA_HOME/bin/java
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD=java
+    if ! command -v java >/dev/null 2>&1
+    then
+        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+fi
+
+# Increase the maximum file descriptors if we can.
+if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
+    case $MAX_FD in #(
+      max*)
+        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        MAX_FD=$( ulimit -H -n ) ||
+            warn "Could not query maximum file descriptor limit"
+    esac
+    case $MAX_FD in  #(
+      '' | soft) :;; #(
+      *)
+        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        ulimit -n "$MAX_FD" ||
+            warn "Could not set maximum file descriptor limit to $MAX_FD"
+    esac
+fi
+
+# Collect all arguments for the java command, stacking in reverse order:
+#   * args from the command line
+#   * the main class name
+#   * -classpath
+#   * -D...appname settings
+#   * --module-path (only if needed)
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
+
+# For Cygwin or MSYS, switch paths to Windows format before running java
+if "$cygwin" || "$msys" ; then
+    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
+    CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" )
+
+    JAVACMD=$( cygpath --unix "$JAVACMD" )
+
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    for arg do
+        if
+            case $arg in                                #(
+              -*)   false ;;                            # don't mess with options #(
+              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
+                    [ -e "$t" ] ;;                      #(
+              *)    false ;;
+            esac
+        then
+            arg=$( cygpath --path --ignore --mixed "$arg" )
+        fi
+        # Roll the args list around exactly as many times as the number of
+        # args, so each arg winds up back in the position where it started, but
+        # possibly modified.
+        #
+        # NB: a `for` loop captures its iteration list before it begins, so
+        # changing the positional parameters here affects neither the number of
+        # iterations, nor the values presented in `arg`.
+        shift                   # remove old arg
+        set -- "$@" "$arg"      # push replacement arg
+    done
+fi
+
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
+
+# Collect all arguments for the java command:
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
+#     and any embedded shellness will be escaped.
+#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
+#     treated as '${Hostname}' itself on the command line.
+
+set -- \
+        "-Dorg.gradle.appname=$APP_BASE_NAME" \
+        -classpath "$CLASSPATH" \
+        org.gradle.wrapper.GradleWrapperMain \
+        "$@"
+
+# Stop when "xargs" is not available.
+if ! command -v xargs >/dev/null 2>&1
+then
+    die "xargs is not available"
+fi
+
+# Use "xargs" to parse quoted args.
+#
+# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
+#
+# In Bash we could simply go:
+#
+#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
+#   set -- "${ARGS[@]}" "$@"
+#
+# but POSIX shell has neither arrays nor command substitution, so instead we
+# post-process each arg (as a line of input to sed) to backslash-escape any
+# character that might be a shell metacharacter, then use eval to reverse
+# that process (while maintaining the separation between arguments), and wrap
+# the whole thing up as a single "set" statement.
+#
+# This will of course break if any of these variables contains a newline or
+# an unmatched quote.
+#
+
+eval "set -- $(
+        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
+        xargs -n1 |
+        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
+        tr '\n' ' '
+    )" '"$@"'
+
+exec "$JAVACMD" "$@"
diff --git a/native-image/include-metadata/gradlew.bat b/native-image/include-metadata/gradlew.bat
new file mode 100644
index 000000000..7101f8e46
--- /dev/null
+++ b/native-image/include-metadata/gradlew.bat
@@ -0,0 +1,92 @@
+@rem
+@rem Copyright 2015 the original author or authors.
+@rem
+@rem Licensed under the Apache License, Version 2.0 (the "License");
+@rem you may not use this file except in compliance with the License.
+@rem You may obtain a copy of the License at
+@rem
+@rem      https://www.apache.org/licenses/LICENSE-2.0
+@rem
+@rem Unless required by applicable law or agreed to in writing, software
+@rem distributed under the License is distributed on an "AS IS" BASIS,
+@rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+@rem See the License for the specific language governing permissions and
+@rem limitations under the License.
+@rem
+
+@if "%DEBUG%"=="" @echo off
+@rem ##########################################################################
+@rem
+@rem  Gradle startup script for Windows
+@rem
+@rem ##########################################################################
+
+@rem Set local scope for the variables with windows NT shell
+if "%OS%"=="Windows_NT" setlocal
+
+set DIRNAME=%~dp0
+if "%DIRNAME%"=="" set DIRNAME=.
+@rem This is normally unused
+set APP_BASE_NAME=%~n0
+set APP_HOME=%DIRNAME%
+
+@rem Resolve any "." and ".." in APP_HOME to make it shorter.
+for %%i in ("%APP_HOME%") do set APP_HOME=%%~fi
+
+@rem Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+set DEFAULT_JVM_OPTS="-Xmx64m" "-Xms64m"
+
+@rem Find java.exe
+if defined JAVA_HOME goto findJavaFromJavaHome
+
+set JAVA_EXE=java.exe
+%JAVA_EXE% -version >NUL 2>&1
+if %ERRORLEVEL% equ 0 goto execute
+
+echo. 1>&2
+echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 1>&2
+echo. 1>&2
+echo Please set the JAVA_HOME variable in your environment to match the 1>&2
+echo location of your Java installation. 1>&2
+
+goto fail
+
+:findJavaFromJavaHome
+set JAVA_HOME=%JAVA_HOME:"=%
+set JAVA_EXE=%JAVA_HOME%/bin/java.exe
+
+if exist "%JAVA_EXE%" goto execute
+
+echo. 1>&2
+echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 1>&2
+echo. 1>&2
+echo Please set the JAVA_HOME variable in your environment to match the 1>&2
+echo location of your Java installation. 1>&2
+
+goto fail
+
+:execute
+@rem Setup the command line
+
+set CLASSPATH=%APP_HOME%\gradle\wrapper\gradle-wrapper.jar
+
+
+@rem Execute Gradle
+"%JAVA_EXE%" %DEFAULT_JVM_OPTS% %JAVA_OPTS% %GRADLE_OPTS% "-Dorg.gradle.appname=%APP_BASE_NAME%" -classpath "%CLASSPATH%" org.gradle.wrapper.GradleWrapperMain %*
+
+:end
+@rem End local scope for the variables with windows NT shell
+if %ERRORLEVEL% equ 0 goto mainEnd
+
+:fail
+rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of
+rem the _cmd.exe /c_ return code!
+set EXIT_CODE=%ERRORLEVEL%
+if %EXIT_CODE% equ 0 set EXIT_CODE=1
+if not ""=="%GRADLE_EXIT_CONSOLE%" exit %EXIT_CODE%
+exit /b %EXIT_CODE%
+
+:mainEnd
+if "%OS%"=="Windows_NT" endlocal
+
+:omega
diff --git a/native-image/include-metadata/mvnw b/native-image/include-metadata/mvnw
new file mode 100755
index 000000000..8d937f4c1
--- /dev/null
+++ b/native-image/include-metadata/mvnw
@@ -0,0 +1,308 @@
+#!/bin/sh
+# ----------------------------------------------------------------------------
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# ----------------------------------------------------------------------------
+
+# ----------------------------------------------------------------------------
+# Apache Maven Wrapper startup batch script, version 3.2.0
+#
+# Required ENV vars:
+# ------------------
+#   JAVA_HOME - location of a JDK home dir
+#
+# Optional ENV vars
+# -----------------
+#   MAVEN_OPTS - parameters passed to the Java VM when running Maven
+#     e.g. to debug Maven itself, use
+#       set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+#   MAVEN_SKIP_RC - flag to disable loading of mavenrc files
+# ----------------------------------------------------------------------------
+
+if [ -z "$MAVEN_SKIP_RC" ] ; then
+
+  if [ -f /usr/local/etc/mavenrc ] ; then
+    . /usr/local/etc/mavenrc
+  fi
+
+  if [ -f /etc/mavenrc ] ; then
+    . /etc/mavenrc
+  fi
+
+  if [ -f "$HOME/.mavenrc" ] ; then
+    . "$HOME/.mavenrc"
+  fi
+
+fi
+
+# OS specific support.  $var _must_ be set to either true or false.
+cygwin=false;
+darwin=false;
+mingw=false
+case "$(uname)" in
+  CYGWIN*) cygwin=true ;;
+  MINGW*) mingw=true;;
+  Darwin*) darwin=true
+    # Use /usr/libexec/java_home if available, otherwise fall back to /Library/Java/Home
+    # See https://developer.apple.com/library/mac/qa/qa1170/_index.html
+    if [ -z "$JAVA_HOME" ]; then
+      if [ -x "/usr/libexec/java_home" ]; then
+        JAVA_HOME="$(/usr/libexec/java_home)"; export JAVA_HOME
+      else
+        JAVA_HOME="/Library/Java/Home"; export JAVA_HOME
+      fi
+    fi
+    ;;
+esac
+
+if [ -z "$JAVA_HOME" ] ; then
+  if [ -r /etc/gentoo-release ] ; then
+    JAVA_HOME=$(java-config --jre-home)
+  fi
+fi
+
+# For Cygwin, ensure paths are in UNIX format before anything is touched
+if $cygwin ; then
+  [ -n "$JAVA_HOME" ] &&
+    JAVA_HOME=$(cygpath --unix "$JAVA_HOME")
+  [ -n "$CLASSPATH" ] &&
+    CLASSPATH=$(cygpath --path --unix "$CLASSPATH")
+fi
+
+# For Mingw, ensure paths are in UNIX format before anything is touched
+if $mingw ; then
+  [ -n "$JAVA_HOME" ] && [ -d "$JAVA_HOME" ] &&
+    JAVA_HOME="$(cd "$JAVA_HOME" || (echo "cannot cd into $JAVA_HOME."; exit 1); pwd)"
+fi
+
+if [ -z "$JAVA_HOME" ]; then
+  javaExecutable="$(which javac)"
+  if [ -n "$javaExecutable" ] && ! [ "$(expr "\"$javaExecutable\"" : '\([^ ]*\)')" = "no" ]; then
+    # readlink(1) is not available as standard on Solaris 10.
+    readLink=$(which readlink)
+    if [ ! "$(expr "$readLink" : '\([^ ]*\)')" = "no" ]; then
+      if $darwin ; then
+        javaHome="$(dirname "\"$javaExecutable\"")"
+        javaExecutable="$(cd "\"$javaHome\"" && pwd -P)/javac"
+      else
+        javaExecutable="$(readlink -f "\"$javaExecutable\"")"
+      fi
+      javaHome="$(dirname "\"$javaExecutable\"")"
+      javaHome=$(expr "$javaHome" : '\(.*\)/bin')
+      JAVA_HOME="$javaHome"
+      export JAVA_HOME
+    fi
+  fi
+fi
+
+if [ -z "$JAVACMD" ] ; then
+  if [ -n "$JAVA_HOME"  ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+      # IBM's JDK on AIX uses strange locations for the executables
+      JAVACMD="$JAVA_HOME/jre/sh/java"
+    else
+      JAVACMD="$JAVA_HOME/bin/java"
+    fi
+  else
+    JAVACMD="$(\unset -f command 2>/dev/null; \command -v java)"
+  fi
+fi
+
+if [ ! -x "$JAVACMD" ] ; then
+  echo "Error: JAVA_HOME is not defined correctly." >&2
+  echo "  We cannot execute $JAVACMD" >&2
+  exit 1
+fi
+
+if [ -z "$JAVA_HOME" ] ; then
+  echo "Warning: JAVA_HOME environment variable is not set."
+fi
+
+# traverses directory structure from process work directory to filesystem root
+# first directory with .mvn subdirectory is considered project base directory
+find_maven_basedir() {
+  if [ -z "$1" ]
+  then
+    echo "Path not specified to find_maven_basedir"
+    return 1
+  fi
+
+  basedir="$1"
+  wdir="$1"
+  while [ "$wdir" != '/' ] ; do
+    if [ -d "$wdir"/.mvn ] ; then
+      basedir=$wdir
+      break
+    fi
+    # workaround for JBEAP-8937 (on Solaris 10/Sparc)
+    if [ -d "${wdir}" ]; then
+      wdir=$(cd "$wdir/.." || exit 1; pwd)
+    fi
+    # end of workaround
+  done
+  printf '%s' "$(cd "$basedir" || exit 1; pwd)"
+}
+
+# concatenates all lines of a file
+concat_lines() {
+  if [ -f "$1" ]; then
+    # Remove \r in case we run on Windows within Git Bash
+    # and check out the repository with auto CRLF management
+    # enabled. Otherwise, we may read lines that are delimited with
+    # \r\n and produce $'-Xarg\r' rather than -Xarg due to word
+    # splitting rules.
+    tr -s '\r\n' ' ' < "$1"
+  fi
+}
+
+log() {
+  if [ "$MVNW_VERBOSE" = true ]; then
+    printf '%s\n' "$1"
+  fi
+}
+
+BASE_DIR=$(find_maven_basedir "$(dirname "$0")")
+if [ -z "$BASE_DIR" ]; then
+  exit 1;
+fi
+
+MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"}; export MAVEN_PROJECTBASEDIR
+log "$MAVEN_PROJECTBASEDIR"
+
+##########################################################################################
+# Extension to allow automatically downloading the maven-wrapper.jar from Maven-central
+# This allows using the maven wrapper in projects that prohibit checking in binary data.
+##########################################################################################
+wrapperJarPath="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar"
+if [ -r "$wrapperJarPath" ]; then
+    log "Found $wrapperJarPath"
+else
+    log "Couldn't find $wrapperJarPath, downloading it ..."
+
+    if [ -n "$MVNW_REPOURL" ]; then
+      wrapperUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"
+    else
+      wrapperUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"
+    fi
+    while IFS="=" read -r key value; do
+      # Remove '\r' from value to allow usage on windows as IFS does not consider '\r' as a separator ( considers space, tab, new line ('\n'), and custom '=' )
+      safeValue=$(echo "$value" | tr -d '\r')
+      case "$key" in (wrapperUrl) wrapperUrl="$safeValue"; break ;;
+      esac
+    done < "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+    log "Downloading from: $wrapperUrl"
+
+    if $cygwin; then
+      wrapperJarPath=$(cygpath --path --windows "$wrapperJarPath")
+    fi
+
+    if command -v wget > /dev/null; then
+        log "Found wget ... using wget"
+        [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--quiet"
+        if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+            wget $QUIET "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath"
+        else
+            wget $QUIET --http-user="$MVNW_USERNAME" --http-password="$MVNW_PASSWORD" "$wrapperUrl" -O "$wrapperJarPath" || rm -f "$wrapperJarPath"
+        fi
+    elif command -v curl > /dev/null; then
+        log "Found curl ... using curl"
+        [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--silent"
+        if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+            curl $QUIET -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+        else
+            curl $QUIET --user "$MVNW_USERNAME:$MVNW_PASSWORD" -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+        fi
+    else
+        log "Falling back to using Java to download"
+        javaSource="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.java"
+        javaClass="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.class"
+        # For Cygwin, switch paths to Windows format before running javac
+        if $cygwin; then
+          javaSource=$(cygpath --path --windows "$javaSource")
+          javaClass=$(cygpath --path --windows "$javaClass")
+        fi
+        if [ -e "$javaSource" ]; then
+            if [ ! -e "$javaClass" ]; then
+                log " - Compiling MavenWrapperDownloader.java ..."
+                ("$JAVA_HOME/bin/javac" "$javaSource")
+            fi
+            if [ -e "$javaClass" ]; then
+                log " - Running MavenWrapperDownloader.java ..."
+                ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader "$wrapperUrl" "$wrapperJarPath") || rm -f "$wrapperJarPath"
+            fi
+        fi
+    fi
+fi
+##########################################################################################
+# End of extension
+##########################################################################################
+
+# If specified, validate the SHA-256 sum of the Maven wrapper jar file
+wrapperSha256Sum=""
+while IFS="=" read -r key value; do
+  case "$key" in (wrapperSha256Sum) wrapperSha256Sum=$value; break ;;
+  esac
+done < "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+if [ -n "$wrapperSha256Sum" ]; then
+  wrapperSha256Result=false
+  if command -v sha256sum > /dev/null; then
+    if echo "$wrapperSha256Sum  $wrapperJarPath" | sha256sum -c > /dev/null 2>&1; then
+      wrapperSha256Result=true
+    fi
+  elif command -v shasum > /dev/null; then
+    if echo "$wrapperSha256Sum  $wrapperJarPath" | shasum -a 256 -c > /dev/null 2>&1; then
+      wrapperSha256Result=true
+    fi
+  else
+    echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available."
+    echo "Please install either command, or disable validation by removing 'wrapperSha256Sum' from your maven-wrapper.properties."
+    exit 1
+  fi
+  if [ $wrapperSha256Result = false ]; then
+    echo "Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised." >&2
+    echo "Investigate or delete $wrapperJarPath to attempt a clean download." >&2
+    echo "If you updated your Maven version, you need to update the specified wrapperSha256Sum property." >&2
+    exit 1
+  fi
+fi
+
+MAVEN_OPTS="$(concat_lines "$MAVEN_PROJECTBASEDIR/.mvn/jvm.config") $MAVEN_OPTS"
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin; then
+  [ -n "$JAVA_HOME" ] &&
+    JAVA_HOME=$(cygpath --path --windows "$JAVA_HOME")
+  [ -n "$CLASSPATH" ] &&
+    CLASSPATH=$(cygpath --path --windows "$CLASSPATH")
+  [ -n "$MAVEN_PROJECTBASEDIR" ] &&
+    MAVEN_PROJECTBASEDIR=$(cygpath --path --windows "$MAVEN_PROJECTBASEDIR")
+fi
+
+# Provide a "standardized" way to retrieve the CLI args that will
+# work with both Windows and non-Windows executions.
+MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $*"
+export MAVEN_CMD_LINE_ARGS
+
+WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
+
+# shellcheck disable=SC2086 # safe args
+exec "$JAVACMD" \
+  $MAVEN_OPTS \
+  $MAVEN_DEBUG_OPTS \
+  -classpath "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar" \
+  "-Dmaven.multiModuleProjectDirectory=${MAVEN_PROJECTBASEDIR}" \
+  ${WRAPPER_LAUNCHER} $MAVEN_CONFIG "$@"
diff --git a/native-image/include-metadata/mvnw.cmd b/native-image/include-metadata/mvnw.cmd
new file mode 100644
index 000000000..f80fbad3e
--- /dev/null
+++ b/native-image/include-metadata/mvnw.cmd
@@ -0,0 +1,205 @@
+@REM ----------------------------------------------------------------------------
+@REM Licensed to the Apache Software Foundation (ASF) under one
+@REM or more contributor license agreements.  See the NOTICE file
+@REM distributed with this work for additional information
+@REM regarding copyright ownership.  The ASF licenses this file
+@REM to you under the Apache License, Version 2.0 (the
+@REM "License"); you may not use this file except in compliance
+@REM with the License.  You may obtain a copy of the License at
+@REM
+@REM    http://www.apache.org/licenses/LICENSE-2.0
+@REM
+@REM Unless required by applicable law or agreed to in writing,
+@REM software distributed under the License is distributed on an
+@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+@REM KIND, either express or implied.  See the License for the
+@REM specific language governing permissions and limitations
+@REM under the License.
+@REM ----------------------------------------------------------------------------
+
+@REM ----------------------------------------------------------------------------
+@REM Apache Maven Wrapper startup batch script, version 3.2.0
+@REM
+@REM Required ENV vars:
+@REM JAVA_HOME - location of a JDK home dir
+@REM
+@REM Optional ENV vars
+@REM MAVEN_BATCH_ECHO - set to 'on' to enable the echoing of the batch commands
+@REM MAVEN_BATCH_PAUSE - set to 'on' to wait for a keystroke before ending
+@REM MAVEN_OPTS - parameters passed to the Java VM when running Maven
+@REM     e.g. to debug Maven itself, use
+@REM set MAVEN_OPTS=-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+@REM MAVEN_SKIP_RC - flag to disable loading of mavenrc files
+@REM ----------------------------------------------------------------------------
+
+@REM Begin all REM lines with '@' in case MAVEN_BATCH_ECHO is 'on'
+@echo off
+@REM set title of command window
+title %0
+@REM enable echoing by setting MAVEN_BATCH_ECHO to 'on'
+@if "%MAVEN_BATCH_ECHO%" == "on"  echo %MAVEN_BATCH_ECHO%
+
+@REM set %HOME% to equivalent of $HOME
+if "%HOME%" == "" (set "HOME=%HOMEDRIVE%%HOMEPATH%")
+
+@REM Execute a user defined script before this one
+if not "%MAVEN_SKIP_RC%" == "" goto skipRcPre
+@REM check for pre script, once with legacy .bat ending and once with .cmd ending
+if exist "%USERPROFILE%\mavenrc_pre.bat" call "%USERPROFILE%\mavenrc_pre.bat" %*
+if exist "%USERPROFILE%\mavenrc_pre.cmd" call "%USERPROFILE%\mavenrc_pre.cmd" %*
+:skipRcPre
+
+@setlocal
+
+set ERROR_CODE=0
+
+@REM To isolate internal variables from possible post scripts, we use another setlocal
+@setlocal
+
+@REM ==== START VALIDATION ====
+if not "%JAVA_HOME%" == "" goto OkJHome
+
+echo.
+echo Error: JAVA_HOME not found in your environment. >&2
+echo Please set the JAVA_HOME variable in your environment to match the >&2
+echo location of your Java installation. >&2
+echo.
+goto error
+
+:OkJHome
+if exist "%JAVA_HOME%\bin\java.exe" goto init
+
+echo.
+echo Error: JAVA_HOME is set to an invalid directory. >&2
+echo JAVA_HOME = "%JAVA_HOME%" >&2
+echo Please set the JAVA_HOME variable in your environment to match the >&2
+echo location of your Java installation. >&2
+echo.
+goto error
+
+@REM ==== END VALIDATION ====
+
+:init
+
+@REM Find the project base dir, i.e. the directory that contains the folder ".mvn".
+@REM Fallback to current working directory if not found.
+
+set MAVEN_PROJECTBASEDIR=%MAVEN_BASEDIR%
+IF NOT "%MAVEN_PROJECTBASEDIR%"=="" goto endDetectBaseDir
+
+set EXEC_DIR=%CD%
+set WDIR=%EXEC_DIR%
+:findBaseDir
+IF EXIST "%WDIR%"\.mvn goto baseDirFound
+cd ..
+IF "%WDIR%"=="%CD%" goto baseDirNotFound
+set WDIR=%CD%
+goto findBaseDir
+
+:baseDirFound
+set MAVEN_PROJECTBASEDIR=%WDIR%
+cd "%EXEC_DIR%"
+goto endDetectBaseDir
+
+:baseDirNotFound
+set MAVEN_PROJECTBASEDIR=%EXEC_DIR%
+cd "%EXEC_DIR%"
+
+:endDetectBaseDir
+
+IF NOT EXIST "%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config" goto endReadAdditionalConfig
+
+@setlocal EnableExtensions EnableDelayedExpansion
+for /F "usebackq delims=" %%a in ("%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config") do set JVM_CONFIG_MAVEN_PROPS=!JVM_CONFIG_MAVEN_PROPS! %%a
+@endlocal & set JVM_CONFIG_MAVEN_PROPS=%JVM_CONFIG_MAVEN_PROPS%
+
+:endReadAdditionalConfig
+
+SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe"
+set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar"
+set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
+
+set WRAPPER_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"
+
+FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (
+    IF "%%A"=="wrapperUrl" SET WRAPPER_URL=%%B
+)
+
+@REM Extension to allow automatically downloading the maven-wrapper.jar from Maven-central
+@REM This allows using the maven wrapper in projects that prohibit checking in binary data.
+if exist %WRAPPER_JAR% (
+    if "%MVNW_VERBOSE%" == "true" (
+        echo Found %WRAPPER_JAR%
+    )
+) else (
+    if not "%MVNW_REPOURL%" == "" (
+        SET WRAPPER_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.2.0/maven-wrapper-3.2.0.jar"
+    )
+    if "%MVNW_VERBOSE%" == "true" (
+        echo Couldn't find %WRAPPER_JAR%, downloading it ...
+        echo Downloading from: %WRAPPER_URL%
+    )
+
+    powershell -Command "&{"^
+		"$webclient = new-object System.Net.WebClient;"^
+		"if (-not ([string]::IsNullOrEmpty('%MVNW_USERNAME%') -and [string]::IsNullOrEmpty('%MVNW_PASSWORD%'))) {"^
+		"$webclient.Credentials = new-object System.Net.NetworkCredential('%MVNW_USERNAME%', '%MVNW_PASSWORD%');"^
+		"}"^
+		"[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12; $webclient.DownloadFile('%WRAPPER_URL%', '%WRAPPER_JAR%')"^
+		"}"
+    if "%MVNW_VERBOSE%" == "true" (
+        echo Finished downloading %WRAPPER_JAR%
+    )
+)
+@REM End of extension
+
+@REM If specified, validate the SHA-256 sum of the Maven wrapper jar file
+SET WRAPPER_SHA_256_SUM=""
+FOR /F "usebackq tokens=1,2 delims==" %%A IN ("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (
+    IF "%%A"=="wrapperSha256Sum" SET WRAPPER_SHA_256_SUM=%%B
+)
+IF NOT %WRAPPER_SHA_256_SUM%=="" (
+    powershell -Command "&{"^
+       "$hash = (Get-FileHash \"%WRAPPER_JAR%\" -Algorithm SHA256).Hash.ToLower();"^
+       "If('%WRAPPER_SHA_256_SUM%' -ne $hash){"^
+       "  Write-Output 'Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper might be compromised.';"^
+       "  Write-Output 'Investigate or delete %WRAPPER_JAR% to attempt a clean download.';"^
+       "  Write-Output 'If you updated your Maven version, you need to update the specified wrapperSha256Sum property.';"^
+       "  exit 1;"^
+       "}"^
+       "}"
+    if ERRORLEVEL 1 goto error
+)
+
+@REM Provide a "standardized" way to retrieve the CLI args that will
+@REM work with both Windows and non-Windows executions.
+set MAVEN_CMD_LINE_ARGS=%*
+
+%MAVEN_JAVA_EXE% ^
+  %JVM_CONFIG_MAVEN_PROPS% ^
+  %MAVEN_OPTS% ^
+  %MAVEN_DEBUG_OPTS% ^
+  -classpath %WRAPPER_JAR% ^
+  "-Dmaven.multiModuleProjectDirectory=%MAVEN_PROJECTBASEDIR%" ^
+  %WRAPPER_LAUNCHER% %MAVEN_CONFIG% %*
+if ERRORLEVEL 1 goto error
+goto end
+
+:error
+set ERROR_CODE=1
+
+:end
+@endlocal & set ERROR_CODE=%ERROR_CODE%
+
+if not "%MAVEN_SKIP_RC%"=="" goto skipRcPost
+@REM check for post script, once with legacy .bat ending and once with .cmd ending
+if exist "%USERPROFILE%\mavenrc_post.bat" call "%USERPROFILE%\mavenrc_post.bat"
+if exist "%USERPROFILE%\mavenrc_post.cmd" call "%USERPROFILE%\mavenrc_post.cmd"
+:skipRcPost
+
+@REM pause the script if MAVEN_BATCH_PAUSE is set to 'on'
+if "%MAVEN_BATCH_PAUSE%"=="on" pause
+
+if "%MAVEN_TERMINATE_CMD%"=="on" exit %ERROR_CODE%
+
+cmd /C exit /B %ERROR_CODE%
diff --git a/native-image/include-metadata/pom.xml b/native-image/include-metadata/pom.xml
new file mode 100644
index 000000000..694c79438
--- /dev/null
+++ b/native-image/include-metadata/pom.xml
@@ -0,0 +1,141 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0
+        http://maven.apache.org/xsd/maven-4.0.0.xsd">
+    <modelVersion>4.0.0</modelVersion>
+
+    <groupId>org.graalvm.buildtools.example</groupId>
+    <artifactId>h2example</artifactId>
+    <version>1.0.0-SNAPSHOT</version>
+
+    <properties>
+        <h2.version>2.2.220</h2.version>
+        <maven.compiler.source>21</maven.compiler.source>
+        <maven.compiler.target>21</maven.compiler.target>
+        <native.maven.plugin.version>0.10.3</native.maven.plugin.version>
+        <mainClass>org.graalvm.example.H2Example</mainClass>
+    </properties>
+
+    <dependencies>
+        <!-- 1. H2 Database dependency -->
+        <dependency>
+            <groupId>com.h2database</groupId>
+            <artifactId>h2</artifactId>
+            <version>${h2.version}</version>
+        </dependency>
+    </dependencies>
+    <!-- 2. Native Image Maven plugin within a Maven profile -->
+    <profiles>
+        <profile>
+            <id>native</id>
+            <build>
+                <plugins>
+                    <plugin>
+                        <groupId>org.graalvm.buildtools</groupId>
+                        <artifactId>native-maven-plugin</artifactId>
+                        <version>0.10.3</version>
+                        <extensions>true</extensions>
+                        <executions>
+                            <execution>
+                                <id>build-native</id>
+                                <goals>
+                                    <goal>compile-no-fork</goal>
+                                </goals>
+                                <phase>package</phase>
+                            </execution>
+                        </executions>
+                        <configuration>
+                            <agent>
+                                <enabled>true</enabled>
+                            </agent>
+                            <buildArgs>
+                                <!-- 3. Quick build mode -->
+                                <buildArg>-Ob</buildArg>
+                            </buildArgs>
+                        </configuration>
+                    </plugin>
+                     <plugin>
+                        <groupId>org.codehaus.mojo</groupId>
+                        <artifactId>exec-maven-plugin</artifactId>
+                        <version>3.1.1</version>
+                        <executions>
+                            <execution>
+                                <id>java-agent</id>
+                                <goals>
+                                    <goal>exec</goal>
+                                </goals>
+                                <phase>test</phase>
+                                <configuration>
+                                    <executable>java</executable>
+                                    <workingDirectory>${project.build.directory}</workingDirectory>
+                                    <arguments>
+                                        <argument>-classpath</argument>
+                                        <classpath/>
+                                        <argument>${mainClass}</argument>
+                                    </arguments>
+                                </configuration>
+                            </execution>
+                        </executions>
+                    </plugin>
+                </plugins>
+            </build>
+        </profile>
+    </profiles>
+    <build>
+        <finalName>${project.artifactId}</finalName>
+        <plugins>
+            <plugin>
+                <groupId>org.apache.maven.plugins</groupId>
+                <artifactId>maven-surefire-plugin</artifactId>
+                <version>3.0.0-M5</version>
+            </plugin>
+            <plugin>
+                <groupId>org.apache.maven.plugins</groupId>
+                <artifactId>maven-compiler-plugin</artifactId>
+                <version>3.11.0</version>
+                <configuration>
+                    <fork>true</fork>
+                </configuration>
+            </plugin>
+            <plugin>
+                <groupId>org.apache.maven.plugins</groupId>
+                <artifactId>maven-jar-plugin</artifactId>
+                <version>3.3.0</version>
+                <configuration>
+                    <archive>
+                        <manifest>
+                            <addClasspath>true</addClasspath>
+                            <mainClass>${mainClass}</mainClass>
+                        </manifest>
+                    </archive>
+                </configuration>
+            </plugin>
+            <plugin>
+                <groupId>org.codehaus.mojo</groupId>
+                <artifactId>exec-maven-plugin</artifactId>
+                <version>3.1.1</version>
+                <executions>
+                    <execution>
+                        <id>java</id>
+                        <goals>
+                            <goal>java</goal>
+                        </goals>
+                        <configuration>
+                            <mainClass>${mainClass}</mainClass>
+                        </configuration>
+                    </execution>
+                    <execution>
+                        <id>native</id>
+                        <goals>
+                            <goal>exec</goal>
+                        </goals>
+                        <configuration>
+                            <executable>${project.build.directory}/${imageName}</executable>
+                            <workingDirectory>${project.build.directory}</workingDirectory>
+                        </configuration>
+                    </execution>
+                </executions>
+            </plugin>
+        </plugins>
+    </build>
+
+</project>
diff --git a/native-image/include-metadata/run.sh b/native-image/include-metadata/run.sh
new file mode 100755
index 000000000..e7ed00a5b
--- /dev/null
+++ b/native-image/include-metadata/run.sh
@@ -0,0 +1,26 @@
+#!/usr/bin/env bash
+set -ex
+
+## Run Maven Project
+# Default Configuration
+./mvnw -DskipTests clean package
+./mvnw -DskipTests -Pnative package
+./target/h2example
+
+# With Tracing Agent
+./mvnw clean
+./mvnw -Pnative -DskipTests -DskipNativeBuild=true package exec:exec@java-agent
+./mvnw -Pnative -DskipTests package exec:exec@native
+./target/h2example
+
+## Run Gradle Project
+# Default Configuration
+./gradlew run
+./gradlew nativeRun
+./gradlew clean
+
+# With Tracing Agent
+./gradlew -Pagent run
+./gradlew metadataCopy --task run --dir src/main/resources/META-INF/native-image
+./gradlew nativeRun
+./gradlew clean
\ No newline at end of file
diff --git a/native-image/include-metadata/settings.gradle b/native-image/include-metadata/settings.gradle
new file mode 100644
index 000000000..8e4f2099f
--- /dev/null
+++ b/native-image/include-metadata/settings.gradle
@@ -0,0 +1,9 @@
+pluginManagement {
+    repositories {
+        mavenCentral()
+        gradlePluginPortal()
+    }
+}
+
+rootProject.name = 'H2Example'
+include('H2Example')
\ No newline at end of file
diff --git a/native-image/include-metadata/src/main/java/org/graalvm/example/H2Example.java b/native-image/include-metadata/src/main/java/org/graalvm/example/H2Example.java
new file mode 100644
index 000000000..81db0b3c1
--- /dev/null
+++ b/native-image/include-metadata/src/main/java/org/graalvm/example/H2Example.java
@@ -0,0 +1,76 @@
+package org.graalvm.example;
+
+import java.sql.Connection;
+import java.sql.DriverManager;
+import java.sql.PreparedStatement;
+import java.sql.ResultSet;
+import java.sql.SQLException;
+import java.util.ArrayList;
+import java.util.Comparator;
+import java.util.HashSet;
+import java.util.List;
+import java.util.Set;
+
+public class H2Example {
+
+    public static final String JDBC_CONNECTION_URL = "jdbc:h2:./data/test";
+
+    public static void main(String[] args) throws Exception {
+        withConnection(JDBC_CONNECTION_URL, connection -> {
+            connection.prepareStatement("DROP TABLE IF EXISTS customers").execute();
+            connection.commit();
+        });
+
+        Set<String> customers = Set.of("Lord Archimonde", "Arthur", "Gilbert", "Grug");
+
+        System.out.println("=== Inserting the following customers in the database: ");
+        printCustomers(customers);
+
+        withConnection(JDBC_CONNECTION_URL, connection -> {
+            connection.prepareStatement("CREATE TABLE customers(id INTEGER AUTO_INCREMENT, name VARCHAR)").execute();
+            PreparedStatement statement = connection.prepareStatement("INSERT INTO customers(name) VALUES (?)");
+            for (String customer : customers) {
+                statement.setString(1, customer);
+                statement.executeUpdate();
+            }
+            connection.commit();
+        });
+
+        System.out.println("");
+        System.out.println("=== Reading customers from the database.");
+        System.out.println("");
+
+        Set<String> savedCustomers = new HashSet<>();
+        withConnection(JDBC_CONNECTION_URL, connection -> {
+            try (ResultSet resultSet = connection.prepareStatement("SELECT * FROM customers").executeQuery()) {
+                while (resultSet.next()) {
+                    savedCustomers.add(resultSet.getObject(2, String.class));
+                }
+            }
+        });
+
+        System.out.println("=== Customers in the database: ");
+        printCustomers(savedCustomers);
+    }
+
+    private static void printCustomers(Set<String> customers) {
+        List<String> customerList = new ArrayList<>(customers);
+        customerList.sort(Comparator.naturalOrder());
+        int i = 0;
+        for (String customer : customerList) {
+            System.out.println((i + 1) + ". " + customer);
+            i++;
+        }
+    }
+
+    private static void withConnection(String url, ConnectionCallback callback) throws SQLException {
+        try (Connection connection = DriverManager.getConnection(url)) {
+            connection.setAutoCommit(false);
+            callback.run(connection);
+        }
+    }
+
+    private interface ConnectionCallback {
+        void run(Connection connection) throws SQLException;
+    }
+}