CHANGELOG.md

Freifunk München Firmware Changelog

v2019.0.2

• drop ULA support and use public v6 addresses instead
• drop IBSS in favor of 11s only mesh (and disable migration path where 11s is disabled if ibss was disabled before)
• enable configuration of private wifi in configmode

v2019.0.1

• Updated to Gluon v2018.2.1
  • Changes:
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.1.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.2.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.3.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.4.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.5.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.6.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.7.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2017.1.8.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2018.1.html
    • https://gluon.readthedocs.io/en/v2018.1.1/releases/v2018.1.1.html
    • https://gluon.readthedocs.io/en/v2018.2.1/releases/v2018.2.html
    • https://gluon.readthedocs.io/en/v2018.2.1/releases/v2018.2.1.html
• site.conf
  • start using multidomain config
  • update translations (de,en) and added french
  • use GLUON_FEATURES
  • use GLUON_FEATURE web-wizard to have less packages
  • replace ULA for firmware.ffmuc.net by public v6 address
• site.mk
  • remove tecff-respondd-watchdog
  • add ffho-autoupdater-wifi-fallback
  • use ebtables-limit-arp and ebtables-filter-multicast from gluon (instead of ffmuc version)
  • add ebtables-source-filter
  • prepare usage of vxlan for mesh
  • default to 11s for meshing (previous ibss)
    • if supported two different SSIDs will be broadcasted one for each
• update translation for de, en and fr to match current situation
• support for new devices
  • full list: https://gluon.readthedocs.io/en/v2018.2.1/#supported-devices-architectures

v2018.1

• Added sign keys of awlnx, krombel, lukesix to let them sign future releases

v2018.0

• Updated to Gluon v2016.2.7-3-g35c9f9ae

  • ar71xx: fix MAC addresses on TP-Link TL-WR1043ND v4
  • modules: update url to chaos calmer git repository after upstream move
  • ar71xx: sysupgrade: improve CPE/WBS 210/510 validation

• Makefile

  • Enabled firmware with ath10k WLAN driver

v2017.1

• Updated to Gluon v2016.2.7
  • Changes:
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.7.html

v2017.0

• Updated to Gluon v2016.2.6 (upstream)
  • Changes:
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.1.6.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.1.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.2.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.3.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.4.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.5.html
    • https://gluon.readthedocs.io/en/v2016.2.7/releases/v2016.2.6.html
• site.mk
  • added GLUON_REGION = eu setting

v2016.0

• Updated to Gluon v2016.1.5 (ffmuc fork)
  • Changes:
    • https://gluon.readthedocs.org/en/v2016.1/releases/v2016.1.html
    • https://gluon.readthedocs.org/en/v2016.1.1/releases/v2016.1.1.html
    • https://gluon.readthedocs.org/en/v2016.1.2/releases/v2016.1.2.html
    • https://gluon.readthedocs.org/en/v2016.1.3/releases/v2016.1.3.html
    • https://gluon.readthedocs.org/en/v2016.1.4/releases/v2016.1.4.html
    • https://gluon.readthedocs.org/en/v2016.1.5/releases/v2016.1.5.html
    • mesh_no_rebroadcast for mesh-on-wan (8b66da95f1887fc6068a6e9d6b6494c2ff4d2fb4)
    • preserve wifi channels feature (76a77902e3624167e81ca6e200519468bb66d5f7)
    • new package tecff-ath9k-broken-wifi-workaround (freifunkmuc/gluon-packages)
    • added fix for autoupdater (8f5a7c90019085dd8f02f96ab0e7a905f82e1be0)
• site.conf
  • changed MTU size to 1280
  • due to the decreased MTU fastd can now support IPv6
• site.mk
  • added USB support for various devices

v2015.7

• New stable unified firmware for all segments with site-select feature
• Raised required signatures for stable release to 3

v2015.6.2

• Bugfix build for welcome version

v2015.6.1

• Added support of site selection in config mode
• Switch autoupdater URL back to main firmware repo path

v2015.6

• Updated to Gluon 2015.1.2
  • Changes: https://gluon.readthedocs.org/en/v2015.1.2/releases/v2015.1.2.html

v2015.5

• Updated to Gluon 2015.1.1
  • Fixes some problems with mesh on LAN setups
• x86 images now support two network interfaces, eth0 for LAN and eth1 for WAN
• Mesh on WAN is disabled by default
• VPN connection limit was decreased from 2 to 1 to divide the broadcast traffic into half and take unnecessary load from overloaded gateways

v2015.4 [never released]

• Updated to Gluon 2015.1
  • More supported architectures and router models are available, including x86
• Setup Mode
  • A new wifi configuration page is available to disable client and mesh networks on 2.4 & 5GHz indiviually
  • Mesh on WAN can now be configured and is enabled by default
  • Internationalization for German and English is available and will be autodetected depending on the browser setting

v2015.3

• Add 4 new gateways as placeholders (not all are and will be active immediately)
• Integrated no_rebroadcast fix on mesh-vpn from Gluon Upstream
• Added another key for stable version signing

v2015.2

• Updated to new upstream gluon: 52698e62bac2ec0f8764b12cf437040528e77efb
• Switched to batman-adv compat version 15
• Changed channel to 6 with HT20 on 2.4GHz
• Added FFMuc custom gluon packages with ebtables rules:
  • mcast-drop-non-site to prohibit arp traffic except 10.8.0.0/16
  • mcast-drop-arp to drop arp traffic from/to 0.0.0.0
  • mcast-allow-cjdns to allow cjdns multicast traffic
• Use new gateways with DNS names
• Changed default download/upload traffic shaping to 12.000/1.200 kbit/s
• Removed keyformular note on end of luci configuration, as we're now blacklisting keys instead of whitelisting
• Added information about liquid feedback on end of luci configuration
• Use improved version naming scheme for autoupdater compatibility with intermediate versions
• Use internal NTP server 0.ntp.ffmuc.net
• Connections from nodes to gateways only over IPv4 for now (MTU issues)

v2015.1

• Updated to Gluon 2014.4 release
• Autoupdater
  • Now enabled per default
  • Also fetch firmware from build.freifunk-muenchen.de
  • Require two signatures instead of one for stable autoupdate

snapshot~20141119

• fixed ipv4-prefix to /16 netmask
• changed gateways ips to domain-names
• changed msg_pub_key to automate entering the node-data to our key-form
• changed mesh-SSID from 02:0E:8E:1E:61:17 to mesh.ffm
• added ntp_servers '2.ntp.services.ffm','3.ntp.services.ffm','4.ntp.services.ffm'
• changed site_code back to ffmuc (instead of ffm)
• changed hostname_prefix to NULL
• changed mesh_ssid to mesh.ffmuc
• added public key from fpletz

0.6~stable20141018

• changed ip address for gw02

0.6~stable20141011

• gw04 hinzugefügt
• Text "Knoten hinzufügen" geändert
• Autoupdater auf "stable" als Standart-Wert gesetzt

0.6~exp20141004

• Autoupdater hinzugefügt

0.6~exp20140926

• Bugfixes
• gw02 hinzugefügt

0.6~exp20140907

• initiale Version