ft_electroderealign.m

function [elec_realigned] = ft_electroderealign(cfg, elec_original)

% FT_ELECTRODEREALIGN rotates, translates, scales and warps electrode positions. The
% default is to only rotate and translate, i.e. to do a rigid body transformation in
% which only the coordinate system is changed. With the right settings if can apply
% additional deformations to the input sensors (e.g. scale them to better fit the
% skin surface). The different methods are described in detail below.
%
% INTERACTIVE - You can display the skin surface together with the electrode or
% gradiometer positions, and manually (using the graphical user interface) adjust the
% rotation, translation and scaling parameters, so that the electrodes correspond
% with the skin.
%
% FIDUCIAL - You can apply a rigid body realignment based on three fiducial
% locations. After realigning, the fiducials in the input electrode set (typically
% nose, left and right ear) are along the same axes as the fiducials in the template
% electrode set.
%
% TEMPLATE - You can apply a spatial transformation/deformation that automatically
% minimizes the distance between the electrodes or gradiometers and a template or
% sensor array. The warping methods use a non-linear search to minimize the distance
% between the input sensor positions and the corresponding template sensors.
%
% HEADSHAPE - You can apply a spatial transformation/deformation that automatically
% minimizes the distance between the electrodes and the head surface. The warping
% methods use a non-linear search to minimize the distance between the input sensor
% positions and the projection of the electrodes on the head surface.
%
% PROJECT - This projects all electrodes to the nearest point on the
% head surface mesh.
%
% MOVEINWARD - This moves all electrodes inward according to their normals
%
% Use as
%   [elec_realigned] = ft_sensorrealign(cfg)
% with the electrode or gradiometer details in the configuration, or as
%   [elec_realigned] = ft_sensorrealign(cfg, elec_orig)
% with the electrode or gradiometer definition as 2nd input argument.
%
% The configuration can contain the following options
%   cfg.method         = string representing the method for aligning or placing the electrodes
%                        'interactive'     realign manually using a graphical user interface
%                        'fiducial'        realign using three fiducials (e.g. NAS, LPA and RPA)
%                        'template'        realign the electrodes to match a template set
%                        'headshape'       realign the electrodes to fit the head surface
%                        'project'         projects electrodes onto the head surface
%                        'moveinward'      moves electrodes inward along their normals
%   cfg.warp          = string describing the spatial transformation for the template and headshape methods
%                        'rigidbody'       apply a rigid-body warp (default)
%                        'globalrescale'   apply a rigid-body warp with global rescaling
%                        'traditional'     apply a rigid-body warp with individual axes rescaling
%                        'nonlin1'         apply a 1st order non-linear warp
%                        'nonlin2'         apply a 2nd order non-linear warp
%                        'nonlin3'         apply a 3rd order non-linear warp
%                        'nonlin4'         apply a 4th order non-linear warp
%                        'nonlin5'         apply a 5th order non-linear warp
%                        'dykstra2012'     non-linear wrap only for headshape method, useful for projecting ECoG onto cortex hull
%                        'fsaverage'       surface-based realignment with the freesurfer fsaverage brain
%   cfg.channel        = Nx1 cell-array with selection of channels (default = 'all'),
%                        see  FT_CHANNELSELECTION for details
%   cfg.keepchannel    = string, 'yes' or 'no' (default = 'no')
%   cfg.fiducial       = cell-array with the name of three fiducials used for
%                        realigning (default = {'nasion', 'lpa', 'rpa'})
%   cfg.casesensitive  = 'yes' or 'no', determines whether string comparisons
%                        between electrode labels are case sensitive (default = 'yes')
%   cfg.feedback       = 'yes' or 'no' (default = 'no')
%
% The electrode positions can be present in the 2nd input argument or can be specified as
%   cfg.elec          = structure with electrode positions, see FT_DATATYPE_SENS
%   cfg.elecfile      = name of file containing the electrode positions, see FT_READ_SENS
%
% If you want to realign the EEG electrodes using anatomical fiducials, the template
% has to contain the three fiducials, e.g.
%   cfg.target.pos(1,:) = [110 0 0]     % location of the nose
%   cfg.target.pos(2,:) = [0  90 0]     % location of the left ear
%   cfg.target.pos(3,:) = [0 -90 0]     % location of the right ear
%   cfg.target.label    = {'NAS', 'LPA', 'RPA'}
%
% If you want to align EEG electrodes to a single or multiple template electrode sets
% (which will be averaged), you should specify the template electrode sets either as
% electrode structures (i.e. when they are already read in memory) or their file
% names using
%   cfg.target          = single electrode set that serves as standard
% or
%   cfg.target{1..N}    = list of electrode sets that will be averaged
%
% If you want to align EEG electrodes to the head surface, you should specify the head surface as
%   cfg.headshape      = a filename containing headshape, a structure containing a
%                        single triangulated boundary, or a Nx3 matrix with surface
%                        points
%
% If you want to align ECoG electrodes to the pial surface, you first need to compute
% the cortex hull with FT_PREPARE_MESH. dykstra2012 uses algorithm described in
% Dykstra et al. (2012, Neuroimage) in which electrodes are projected onto pial
% surface while minimizing the displacement of the electrodes from original location
% and maintaining the grid shape. It relies on the optimization toolbox.
%   cfg.method         = 'headshape'
%   cfg.warp           = 'dykstra2012'
%   cfg.headshape      = a filename containing headshape, a structure containing a
%                        single triangulated boundary, or a Nx3 matrix with surface
%                        points
%   cfg.feedback       = 'yes' or 'no' (feedback includes the output of the iteration
%                        procedure.
%
% If you want to move the electrodes inward, you should specify
%   cfg.moveinward     = number, the distance that the electrode should be moved
%                        inward (negative numbers result in an outward move)
%
% If you want to align ECoG electrodes to the freesurfer average brain, you should
% specify the path to your headshape (e.g., lh.pial), and ensure you have the
% corresponding registration file (e.g., lh.sphere.reg) in the same directory.
% Moreover, the path to the local freesurfer home is required. Note that, because the
% electrodes are being aligned to the fsaverage brain, the corresponding brain should
% be also used when plotting the data, i.e. use freesurfer/subjects/fsaverage/surf/lh.pial
% rather than surface_pial_left.mat.
%   cfg.method         = 'headshape'
%   cfg.warp           = 'fsaverage'
%   cfg.headshape      = string, filename containing headshape (e.g. <path to freesurfer/surf/lh.pial>)
%   cfg.fshome         = string, path to freesurfer
%
% See also FT_READ_SENS, FT_VOLUMEREALIGN, FT_INTERACTIVEREALIGN,
% FT_DETERMINE_COORDSYS, FT_PREPARE_MESH

% Copyright (C) 2005-2015, Robert Oostenveld
%
% This file is part of FieldTrip, see http://www.fieldtriptoolbox.org
% for the documentation and details.
%
%    FieldTrip is free software: you can redistribute it and/or modify
%    it under the terms of the GNU General Public License as published by
%    the Free Software Foundation, either version 3 of the License, or
%    (at your option) any later version.
%
%    FieldTrip is distributed in the hope that it will be useful,
%    but WITHOUT ANY WARRANTY; without even the implied warranty of
%    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
%    GNU General Public License for more details.
%
%    You should have received a copy of the GNU General Public License
%    along with FieldTrip. If not, see <http://www.gnu.org/licenses/>.
%
% $Id$

% the interactive method uses a global variable to get the data from the figure when it is closed
global norm

% these are used by the ft_preamble/ft_postamble function and scripts
ft_revision = '$Id$';
ft_nargin   = nargin;
ft_nargout  = nargout;

% do the general setup of the function
ft_defaults
ft_preamble init
ft_preamble debug
ft_preamble loadvar    elec_original
ft_preamble provenance elec_original
ft_preamble trackconfig

% the ft_abort variable is set to true or false in ft_preamble_init
if ft_abort
  return
end

% check if the input cfg is valid for this function
cfg = ft_checkconfig(cfg, 'renamed',    {'template', 'target'});
cfg = ft_checkconfig(cfg, 'renamedval', {'method', 'realignfiducials', 'fiducial'});
cfg = ft_checkconfig(cfg, 'renamedval', {'method', 'realignfiducial',  'fiducial'});
cfg = ft_checkconfig(cfg, 'renamedval', {'warp', 'homogenous', 'rigidbody'});
cfg = ft_checkconfig(cfg, 'renamedval', {'warp', 'homogeneous', 'rigidbody'});
cfg = ft_checkconfig(cfg, 'forbidden', 'outline');

% set the defaults
cfg.warp          = ft_getopt(cfg, 'warp', 'rigidbody');
cfg.channel       = ft_getopt(cfg, 'channel',  'all');
cfg.keepchannel   = ft_getopt(cfg, 'keepchannel', 'no');
cfg.feedback      = ft_getopt(cfg, 'feedback', 'no');
cfg.casesensitive = ft_getopt(cfg, 'casesensitive', 'no');
cfg.headshape     = ft_getopt(cfg, 'headshape', []);     % for triangulated head surface, without labels
cfg.target        = ft_getopt(cfg, 'target',  []);       % for electrodes or fiducials, always with labels
cfg.coordsys      = ft_getopt(cfg, 'coordsys');          % this allows for automatic template fiducial placement

if isempty(cfg.target)
  % remove the field, otherwise ft_checkconfig will complain
  cfg = rmfield(cfg, 'target');
end

if ~isempty(cfg.coordsys) && isempty(cfg.target)
  % set the template fiducial locations according to the coordinate system
  switch lower(cfg.coordsys)
    case 'ctf'
      cfg.target = [];
      cfg.target.coordsys = 'ctf';
      cfg.target.pos(1,:) = [100  0 0];
      cfg.target.pos(2,:) = [0   80 0];
      cfg.target.pos(3,:) = [0  -80 0];
      cfg.target.label{1} = 'NAS';
      cfg.target.label{2} = 'LPA';
      cfg.target.label{3} = 'RPA';
    otherwise
      error('the %s coordinate system is not automatically supported, please specify fiducial details in cfg.target')
  end
end

% ensure that the right cfg options have been set corresponding to the method
switch cfg.method
  case 'template'        % realign the sensors to match a template set
    cfg = ft_checkconfig(cfg, 'required', 'target', 'forbidden', 'headshape');
  case 'headshape'     % realign the sensors to fit the head surface
    cfg = ft_checkconfig(cfg, 'required', 'headshape', 'forbidden', 'target');
  case 'fiducial'        % realign using the NAS, LPA and RPA fiducials
    cfg = ft_checkconfig(cfg, 'required', 'target', 'forbidden', 'headshape');
  case 'moveinward'      % moves eletrodes inward
    cfg = ft_checkconfig(cfg, 'required', 'moveinward');
end % switch cfg.method

if strcmp(cfg.method, 'fiducial') && isfield(cfg, 'warp') && ~isequal(cfg.warp, 'rigidbody')
  warning('The method ''fiducial'' implies a rigid body tramsformation. See also http://bugzilla.fieldtriptoolbox.org/show_bug.cgi?id=1722');
  cfg.warp = 'rigidbody';
end
if strcmp(cfg.method, 'fiducial') && isfield(cfg, 'warp') && ~isequal(cfg.warp, 'rigidbody')
  warning('The method ''interactive'' implies a rigid body transformation. See also http://bugzilla.fieldtriptoolbox.org/show_bug.cgi?id=1722');
  cfg.warp = 'rigidbody';
end

if isfield(cfg, 'headshape') && isa(cfg.headshape, 'config')
  % convert the nested config-object back into a normal structure
  cfg.headshape = struct(cfg.headshape);
end

if isfield(cfg, 'target') && isa(cfg.target, 'config')
  % convert the nested config-object back into a normal structure
  cfg.target = struct(cfg.target);
end

% the data can be passed as input arguments or can be read from disk
hasdata = exist('elec_original', 'var');

% get the electrode definition that should be warped
if ~hasdata
  elec_original = ft_fetch_sens(cfg);
else
  % the input electrodes were specified as second input argument
  % or read from cfg.inputfile
end

% ensure that the units are specified
elec_original = ft_convert_units(elec_original);

% ensure up-to-date sensor description (Oct 2011)
elec_original = ft_datatype_sens(elec_original);

% ensure that channel and electrode positions are the same
assert(isequaln(elec_original.elecpos, elec_original.chanpos), 'this function requires same electrode and channel positions.');

% remember the original electrode locations and labels and do all the work with a
% temporary copy, this involves channel selection and changing to lower case
elec = elec_original;

% instead of working with all sensors, only work with the fiducials
% this is useful for gradiometer structures
if strcmp(cfg.method, 'fiducial') && isfield(elec, 'fid')
  fprintf('using the fiducials instead of the sensor positions\n');
  elec.fid.unit = elec.unit;
  elec          = elec.fid;
end

usetarget    = isfield(cfg, 'target')    && ~isempty(cfg.target);
useheadshape = isfield(cfg, 'headshape') && ~isempty(cfg.headshape);

if usetarget
  % get the template electrode definitions
  if ~iscell(cfg.target)
    cfg.target = {cfg.target};
  end
  Ntemplate = length(cfg.target);
  for i=1:Ntemplate
    if isstruct(cfg.target{i})
      target(i) = cfg.target{i};
    else
      target(i) = ft_read_sens(cfg.target{i}, 'senstype', 'eeg');
    end
  end
  clear tmp
  for i=1:Ntemplate
    % ensure up-to-date sensor description
    % ensure that the units are consistent with the electrodes
    tmp(i) = ft_convert_units(ft_datatype_sens(target(i)), elec.unit);
  end
  target = tmp;
end

if useheadshape
  % get the surface describing the head shape
  if isstruct(cfg.headshape) && isfield(cfg.headshape, 'hex')
    cfg.headshape = fixpos(cfg.headshape);
    fprintf('extracting surface from hexahedral mesh\n');
    headshape = mesh2edge(cfg.headshape);
    headshape = poly2tri(headshape);
  elseif isstruct(cfg.headshape) && isfield(cfg.headshape, 'tet')
    cfg.headshape = fixpos(cfg.headshape);
    fprintf('extracting surface from tetrahedral mesh\n');
    headshape = mesh2edge(cfg.headshape);
  elseif isstruct(cfg.headshape) && isfield(cfg.headshape, 'tri')
    cfg.headshape = fixpos(cfg.headshape);
    headshape = cfg.headshape;
  elseif isnumeric(cfg.headshape) && size(cfg.headshape,2)==3
    % use the headshape points specified in the configuration
    headshape.pos = cfg.headshape;
  elseif ischar(cfg.headshape)
    % read the headshape from file
    headshape = ft_read_headshape(cfg.headshape);
  else
    error('cfg.headshape is not specified correctly')
  end
  if ~isfield(headshape, 'tri') && ~isfield(headshape, 'poly')
    % generate a closed triangulation from the surface points
    headshape.pos = unique(headshape.pos, 'rows');
    headshape.tri = projecttri(headshape.pos);
  end
  headshape = ft_convert_units(headshape, elec.unit); % ensure that the units are consistent with the electrodes
end

% convert all labels to lower case for string comparisons
cfg.channel = ft_channelselection(cfg.channel, elec.label);
if strcmp(cfg.casesensitive, 'no')
  elec.label  = lower(elec.label);
  cfg.channel = lower(cfg.channel);
  if usetarget
    for j=1:length(target)
      for i=1:length(target(j).label)
        target(j).label{i} = lower(target(j).label{i});
      end
    end
  end
end
[cfgsel, datsel] = match_str(cfg.channel, elec.label);
% keep the original channel labels
label_original = elec_original.label(datsel);

% start with an empty structure, this will be returned at the end
norm = [];

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
if strcmp(cfg.method, 'template')
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  
  % determine electrode selection and overlapping subset for warping
  cfg.channel = ft_channelselection(cfg.channel, elec.label);
  for i=1:Ntemplate
    cfg.channel = ft_channelselection(cfg.channel, target(i).label);
  end
  
  % make consistent subselection of electrodes
  [cfgsel, datsel] = match_str(cfg.channel, elec.label);
  elec.label = elec.label(datsel);
  elec.elecpos   = elec.elecpos(datsel,:);
  for i=1:Ntemplate
    [cfgsel, datsel] = match_str(cfg.channel, target(i).label);
    target(i).label   = target(i).label(datsel);
    target(i).elecpos = target(i).elecpos(datsel,:);
  end
  
  % compute the average of the target electrode positions
  average = ft_average_sens(target);
  
  fprintf('warping electrodes to average template... '); % the newline comes later
  [norm.elecpos, norm.m] = ft_warp_optim(elec.elecpos, average.elecpos, cfg.warp);
  norm.label = elec.label;
  
  dpre  = mean(sqrt(sum((average.elecpos - elec.elecpos).^2, 2)));
  dpost = mean(sqrt(sum((average.elecpos - norm.elecpos).^2, 2)));
  fprintf('mean distance prior to warping %f, after warping %f\n', dpre, dpost);
  
  if strcmp(cfg.feedback, 'yes')
    % create an empty figure, continued below...
    figure
    axis equal
    axis vis3d
    hold on
    xlabel('x')
    ylabel('y')
    zlabel('z')
    
    % plot all electrodes before warping
    ft_plot_sens(elec, 'r*');
    
    % plot all electrodes after warping
    ft_plot_sens(norm, 'm.', 'label', 'label');
    
    % plot the template electrode locations
    ft_plot_sens(average, 'b.');
    
    % plot lines connecting the input and the realigned electrode locations with the template locations
    my_line3(elec.elecpos, average.elecpos, 'color', 'r');
    my_line3(norm.elecpos, average.elecpos, 'color', 'm');
  end
  
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
elseif strcmp(cfg.method, 'headshape')
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  
  % determine electrode selection and overlapping subset for warping
  cfg.channel = ft_channelselection(cfg.channel, elec.label);
  [cfgsel, datsel] = match_str(cfg.channel, elec.label);
  elec.label   = elec.label(datsel);
  elec.elecpos = elec.elecpos(datsel,:);
  
  norm.label = elec.label;
  if strcmp(cfg.warp, 'dykstra2012')
    norm.elecpos = warp_dykstra2012(elec.elecpos, headshape, cfg.feedback);
  elseif strcmp(cfg.warp, 'fsaverage')
    subj_pial = ft_read_headshape(cfg.headshape);
    [PATHSTR, NAME] = fileparts(cfg.headshape); % lh or rh
    subj_reg = ft_read_headshape([PATHSTR filesep NAME '.sphere.reg']);
    if ~isdir([cfg.fshome filesep 'subjects' filesep 'fsaverage' filesep 'surf'])
      error(['freesurfer dir ' cfg.fshome filesep 'subjects' filesep 'fsaverage' filesep 'surf cannot be found'])
    end
    fsavg_pial = ft_read_headshape([cfg.fshome filesep 'subjects' filesep 'fsaverage' filesep 'surf' filesep NAME '.pial']);
    fsavg_reg = ft_read_headshape([cfg.fshome filesep 'subjects' filesep 'fsaverage' filesep 'surf' filesep NAME '.sphere.reg']);
    
    for e = 1:numel(elec.label)
      % subject space (3D surface): electrode pos -> vertex index
      dist = sqrt(sum(((subj_pial.pos - repmat(elec.elecpos(e,:), size(subj_pial.pos,1), 1)).^2),2));
      [~, minidx] = min(dist);
      
      % intersubject space (2D sphere): vertex index -> vertex pos -> template vertex index
      dist2 = sqrt(sum(((fsavg_reg.pos - repmat(subj_reg.pos(minidx,:), size(fsavg_reg.pos,1), 1)).^2),2));
      [~, minidx2] = min(dist2);
      clear minidx
      
      % template space (3D surface): template vertex index -> template electrode pos
      norm.elecpos(e,:) = fsavg_pial.pos(minidx2,:);
      clear minidx2
    end
    clear subj_pial subj_reg fsavg_pial fsavg_reg
  else
    fprintf('warping electrodes to skin surface... '); % the newline comes later
    [norm.elecpos, norm.m] = ft_warp_optim(elec.elecpos, headshape, cfg.warp);
    
    dpre  = ft_warp_error([],     elec.elecpos, headshape, cfg.warp);
    dpost = ft_warp_error(norm.m, elec.elecpos, headshape, cfg.warp);
    fprintf('mean distance prior to warping %f, after warping %f\n', dpre, dpost);
  end
  
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
elseif strcmp(cfg.method, 'fiducial')
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  
  % the fiducials have to be present in the electrodes and in the template set
  label = intersect(lower(elec.label), lower(target.label));
  
  if ~isfield(cfg, 'fiducial') || isempty(cfg.fiducial)
    % try to determine the names of the fiducials automatically
    option1 = {'nasion' 'left' 'right'};
    option2 = {'nasion' 'lpa' 'rpa'};
    option3 = {'nz' 'left' 'right'};
    option4 = {'nz' 'lpa' 'rpa'};
    option5 = {'nas' 'left' 'right'};
    option6 = {'nas' 'lpa' 'rpa'};
    if length(match_str(label, option1))==3
      cfg.fiducial = option1;
    elseif length(match_str(label, option2))==3
      cfg.fiducial = option2;
    elseif length(match_str(label, option3))==3
      cfg.fiducial = option3;
    elseif length(match_str(label, option4))==3
      cfg.fiducial = option4;
    elseif length(match_str(label, option5))==3
      cfg.fiducial = option5;
    elseif length(match_str(label, option6))==3
      cfg.fiducial = option6;
    else
      error('could not determine consistent fiducials in the input and the target, please specify cfg.fiducial or cfg.coordsys')
    end
  end
  fprintf('matching fiducials {''%s'', ''%s'', ''%s''}\n', cfg.fiducial{1}, cfg.fiducial{2}, cfg.fiducial{3});
  
  % determine electrode selection
  cfg.channel = ft_channelselection(cfg.channel, elec.label);
  [cfgsel, datsel] = match_str(cfg.channel, elec.label);
  elec.label     = elec.label(datsel);
  elec.elecpos   = elec.elecpos(datsel,:);
  
  if length(cfg.fiducial)~=3
    error('you must specify exactly three fiducials');
  end
  
  % do case-insensitive search for fiducial locations
  nas_indx = match_str(lower(elec.label), lower(cfg.fiducial{1}));
  lpa_indx = match_str(lower(elec.label), lower(cfg.fiducial{2}));
  rpa_indx = match_str(lower(elec.label), lower(cfg.fiducial{3}));
  if length(nas_indx)~=1 || length(lpa_indx)~=1 || length(rpa_indx)~=1
    error('not all fiducials were found in the electrode set');
  end
  elec_nas = elec.elecpos(nas_indx,:);
  elec_lpa = elec.elecpos(lpa_indx,:);
  elec_rpa = elec.elecpos(rpa_indx,:);
  
  % FIXME change the flow in the remainder
  % if one or more template electrode sets are specified, then align to the average of those
  % if no template is specified, then align so that the fiducials are along the axis
  
  % find the matching fiducials in the template and average them
  tmpl_nas = nan(Ntemplate,3);
  tmpl_lpa = nan(Ntemplate,3);
  tmpl_rpa = nan(Ntemplate,3);
  for i=1:Ntemplate
    nas_indx = match_str(lower(target(i).label), lower(cfg.fiducial{1}));
    lpa_indx = match_str(lower(target(i).label), lower(cfg.fiducial{2}));
    rpa_indx = match_str(lower(target(i).label), lower(cfg.fiducial{3}));
    if length(nas_indx)~=1 || length(lpa_indx)~=1 || length(rpa_indx)~=1
      error('not all fiducials were found in template %d', i);
    end
    tmpl_nas(i,:) = target(i).elecpos(nas_indx,:);
    tmpl_lpa(i,:) = target(i).elecpos(lpa_indx,:);
    tmpl_rpa(i,:) = target(i).elecpos(rpa_indx,:);
  end
  tmpl_nas = mean(tmpl_nas,1);
  tmpl_lpa = mean(tmpl_lpa,1);
  tmpl_rpa = mean(tmpl_rpa,1);
  
  % realign both to a common coordinate system
  elec2common  = ft_headcoordinates(elec_nas, elec_lpa, elec_rpa);
  templ2common = ft_headcoordinates(tmpl_nas, tmpl_lpa, tmpl_rpa);
  
  % compute the combined transform
  norm         = [];
  norm.m       = templ2common \ elec2common;
  
  % apply the transformation to the fiducials as sanity check
  norm.elecpos(1,:) = ft_warp_apply(norm.m, elec_nas, 'homogeneous');
  norm.elecpos(2,:) = ft_warp_apply(norm.m, elec_lpa, 'homogeneous');
  norm.elecpos(3,:) = ft_warp_apply(norm.m, elec_rpa, 'homogeneous');
  norm.label        = cfg.fiducial;
  
  nas_indx = match_str(lower(elec.label), lower(cfg.fiducial{1}));
  lpa_indx = match_str(lower(elec.label), lower(cfg.fiducial{2}));
  rpa_indx = match_str(lower(elec.label), lower(cfg.fiducial{3}));
  dpre  = mean(sqrt(sum((elec.elecpos([nas_indx lpa_indx rpa_indx],:) - [tmpl_nas; tmpl_lpa; tmpl_rpa]).^2, 2)));
  nas_indx = match_str(lower(norm.label), lower(cfg.fiducial{1}));
  lpa_indx = match_str(lower(norm.label), lower(cfg.fiducial{2}));
  rpa_indx = match_str(lower(norm.label), lower(cfg.fiducial{3}));
  dpost = mean(sqrt(sum((norm.elecpos([nas_indx lpa_indx rpa_indx],:) - [tmpl_nas; tmpl_lpa; tmpl_rpa]).^2, 2)));
  fprintf('mean distance between fiducials prior to realignment %f, after realignment %f\n', dpre, dpost);
  
  if strcmp(cfg.feedback, 'yes')
    % create an empty figure, continued below...
    figure
    axis equal
    axis vis3d
    hold on
    xlabel('x')
    ylabel('y')
    zlabel('z')
    
    % plot the first three electrodes before transformation
    my_plot3(elec.elecpos(1,:), 'r*');
    my_plot3(elec.elecpos(2,:), 'r*');
    my_plot3(elec.elecpos(3,:), 'r*');
    my_text3(elec.elecpos(1,:), elec.label{1}, 'color', 'r');
    my_text3(elec.elecpos(2,:), elec.label{2}, 'color', 'r');
    my_text3(elec.elecpos(3,:), elec.label{3}, 'color', 'r');
    
    % plot the template fiducials
    my_plot3(tmpl_nas, 'b*');
    my_plot3(tmpl_lpa, 'b*');
    my_plot3(tmpl_rpa, 'b*');
    my_text3(tmpl_nas, ' nas', 'color', 'b');
    my_text3(tmpl_lpa, ' lpa', 'color', 'b');
    my_text3(tmpl_rpa, ' rpa', 'color', 'b');
    
    % plot all electrodes after transformation
    my_plot3(norm.elecpos, 'm.');
    my_plot3(norm.elecpos(1,:), 'm*');
    my_plot3(norm.elecpos(2,:), 'm*');
    my_plot3(norm.elecpos(3,:), 'm*');
    my_text3(norm.elecpos(1,:), norm.label{1}, 'color', 'm');
    my_text3(norm.elecpos(2,:), norm.label{2}, 'color', 'm');
    my_text3(norm.elecpos(3,:), norm.label{3}, 'color', 'm');
  end
  
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
elseif strcmp(cfg.method, 'interactive')
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % give the user instructions
  disp('Use the mouse to rotate the head and the electrodes around, and click "redisplay"');
  disp('Close the figure when you are done');
  % open a figure
  fig = figure;
  % add the data to the figure
  set(fig, 'CloseRequestFcn', @cb_close);
  setappdata(fig, 'elec', elec);
  setappdata(fig, 'transform', eye(4));
  if useheadshape
    setappdata(fig, 'headshape', headshape);
  end
  if usetarget
    % FIXME interactive realigning to template electrodes is not yet supported
    % this requires a consistent handling of channel selection etc.
    setappdata(fig, 'target', target);
  end
  % add the GUI elements
  cb_creategui(gca);
  cb_redraw(gca);
  rotate3d on
  waitfor(fig);
  % get the data from the figure that was left behind as global variable
  tmp = norm;
  clear global norm
  norm = tmp;
  clear tmp
  
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
elseif strcmp(cfg.method, 'project')
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % determine electrode selection
  cfg.channel = ft_channelselection(cfg.channel, elec.label);
  [cfgsel, datsel] = match_str(cfg.channel, elec.label);
  elec.label     = elec.label(datsel);
  elec.elecpos   = elec.elecpos(datsel,:);
  
  norm.label = elec.label;
  [dum, norm.elecpos] = project_elec(elec.elecpos, headshape.pos, headshape.tri);
  
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
elseif strcmp(cfg.method, 'moveinward')
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  % determine electrode selection
  cfg.channel = ft_channelselection(cfg.channel, elec.label);
  [cfgsel, datsel] = match_str(cfg.channel, elec.label);
  elec.label     = elec.label(datsel);
  elec.elecpos   = elec.elecpos(datsel,:);
  
  norm.label = elec.label;
  norm.elecpos = moveinward(elec.elecpos, cfg.moveinward);
  
else
  error('unknown method');
end % if method


% apply the spatial transformation to all electrodes, and replace the
% electrode labels by their case-sensitive original values
switch cfg.method
  case {'template', 'headshape'}
    if strcmpi(cfg.warp, 'dykstra2012') || strcmpi(cfg.warp, 'fsaverage')
      elec_realigned = norm;
      elec_realigned.label = label_original;
    else
      % the transformation is a linear or non-linear warp, i.e. a vector
      try
        % convert the vector with fitted parameters into a 4x4 homogenous transformation
        % apply the transformation to the original complete set of sensors
        elec_realigned = ft_transform_sens(feval(cfg.warp, norm.m), elec_original);
      catch
        % the previous section will fail for nonlinear transformations
        elec_realigned.label = label_original;
        try, elec_realigned.elecpos = ft_warp_apply(norm.m, elec_original.elecpos, cfg.warp); end % FIXME why is an error here not dealt with?
      end
      % remember the transformation
      elec_realigned.(cfg.warp) = norm.m;
    end
    
  case  {'fiducial' 'interactive'}
    % the transformation is a 4x4 homogenous matrix
    % apply the transformation to the original complete set of sensors
    elec_realigned = ft_transform_sens(norm.m, elec_original);
    % remember the transformation
    elec_realigned.homogeneous = norm.m;
    
  case {'project','moveinward'}
    % nothing to be done
    elec_realigned = norm;
    elec_realigned.label = label_original;
    
  otherwise
    error('unknown method');
end

% the coordinate system is in general not defined after transformation
if isfield(elec_realigned, 'coordsys')
  elec_realigned = rmfield(elec_realigned, 'coordsys');
end

% in some cases the coordinate system matches that of the input target or headshape
switch cfg.method
  case 'template'
    if isfield(target, 'coordsys')
      elec_realigned.coordsys = target.coordsys;
    end
  case 'headshape'
    if isfield(headshape, 'coordsys')
      elec_realigned.coordsys = headshape.coordsys;
    end
    if isfield(elec_original, 'coordsys')
      if strcmp(cfg.warp, 'dykstra2012') % this warp simply moves the electrodes in the same coordinate space
        elec_realigned.coordsys = elec_original.coordsys;
      elseif strcmp(cfg.warp, 'fsaverage')
        elec_realigned.coordsys = 'fsaverage';
      end
    end
  case 'fiducial'
    if isfield(target, 'coordsys')
      elec_realigned.coordsys = target.coordsys;
    end
  case 'interactive'
    % the coordinate system is not known
  case {'project','moveinward'}
    % the coordinate system remains the same
    if isfield(elec_original, 'coordsys')
      elec_realigned.coordsys = elec_original.coordsys;
    end
  otherwise
    error('unknown method');
end

if istrue(cfg.keepchannel)
  % append the channels that are not realigned
  [~, idx] = setdiff(elec_original.label, elec_realigned.label);
  idx = sort(idx);
  elec_realigned.label = [elec_realigned.label; elec_original.label(idx)];
  elec_realigned.elecpos = [elec_realigned.elecpos; elec_original.elecpos(idx,:)];
end

% channel positions are identical to the electrode positions (this was checked at the start)
elec_realigned.chanpos = elec_realigned.elecpos;

% update it to the latest version
elec_realigned = ft_datatype_sens(elec_realigned);

% do the general cleanup and bookkeeping at the end of the function
ft_postamble debug
ft_postamble trackconfig
ft_postamble previous   elec_original
ft_postamble provenance elec_realigned
ft_postamble history    elec_realigned

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% some simple SUBFUNCTIONs that facilitate 3D plotting
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function h = my_plot3(xyz, varargin)
h = plot3(xyz(:,1), xyz(:,2), xyz(:,3), varargin{:});
function h = my_text3(xyz, varargin)
h = text(xyz(:,1), xyz(:,2), xyz(:,3), varargin{:});
function my_line3(xyzB, xyzE, varargin)
for i=1:size(xyzB,1)
  line([xyzB(i,1) xyzE(i,1)], [xyzB(i,2) xyzE(i,2)], [xyzB(i,3) xyzE(i,3)], varargin{:})
end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function cb_creategui(hObject, eventdata, handles)
% % define the position of each GUI element
fig = get(hObject, 'parent');
% constants
CONTROL_WIDTH  = 0.05;
CONTROL_HEIGHT = 0.06;
CONTROL_HOFFSET = 0.7;
CONTROL_VOFFSET = 0.5;
% rotateui
uicontrol('tag', 'rotateui', 'parent', fig, 'units', 'normalized', 'style', 'text', 'string', 'rotate', 'callback', [])
uicontrol('tag', 'rx', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0', 'callback', @cb_redraw)
uicontrol('tag', 'ry', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0', 'callback', @cb_redraw)
uicontrol('tag', 'rz', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0', 'callback', @cb_redraw)
ft_uilayout(fig, 'tag', 'rotateui', 'BackgroundColor', [0.8 0.8 0.8], 'width', 2*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET,                 'vpos', CONTROL_VOFFSET);
ft_uilayout(fig, 'tag', 'rx',       'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+3*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET);
ft_uilayout(fig, 'tag', 'ry',       'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+4*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET);
ft_uilayout(fig, 'tag', 'rz',       'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+5*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET);

% scaleui
uicontrol('tag', 'scaleui', 'parent', fig, 'units', 'normalized', 'style', 'text', 'string', 'scale', 'callback', [])
uicontrol('tag', 'sx', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '1', 'callback', @cb_redraw)
uicontrol('tag', 'sy', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '1', 'callback', @cb_redraw)
uicontrol('tag', 'sz', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '1', 'callback', @cb_redraw)
ft_uilayout(fig, 'tag', 'scaleui', 'BackgroundColor', [0.8 0.8 0.8], 'width', 2*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET,                 'vpos', CONTROL_VOFFSET-CONTROL_HEIGHT);
ft_uilayout(fig, 'tag', 'sx',      'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+3*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET-CONTROL_HEIGHT);
ft_uilayout(fig, 'tag', 'sy',      'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+4*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET-CONTROL_HEIGHT);
ft_uilayout(fig, 'tag', 'sz',      'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+5*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET-CONTROL_HEIGHT);

% translateui
uicontrol('tag', 'translateui', 'parent', fig, 'units', 'normalized', 'style', 'text', 'string', 'translate', 'callback', [])
uicontrol('tag', 'tx', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0', 'callback', @cb_redraw)
uicontrol('tag', 'ty', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0', 'callback', @cb_redraw)
uicontrol('tag', 'tz', 'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0', 'callback', @cb_redraw)
ft_uilayout(fig, 'tag', 'translateui', 'BackgroundColor', [0.8 0.8 0.8], 'width', 2*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET,                 'vpos', CONTROL_VOFFSET-2*CONTROL_HEIGHT);
ft_uilayout(fig, 'tag', 'tx',          'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+3*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET-2*CONTROL_HEIGHT);
ft_uilayout(fig, 'tag', 'ty',          'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+4*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET-2*CONTROL_HEIGHT);
ft_uilayout(fig, 'tag', 'tz',          'BackgroundColor', [0.8 0.8 0.8], 'width', CONTROL_WIDTH,   'height', CONTROL_HEIGHT/2, 'hpos', CONTROL_HOFFSET+5*CONTROL_WIDTH, 'vpos', CONTROL_VOFFSET-2*CONTROL_HEIGHT);

% control buttons
uicontrol('tag', 'redisplaybtn', 'parent', fig, 'units', 'normalized', 'style', 'pushbutton', 'string', 'redisplay', 'value', [], 'callback', @cb_redraw);
uicontrol('tag', 'applybtn', 'parent', fig, 'units', 'normalized', 'style', 'pushbutton', 'string', 'apply',     'value', [], 'callback', @cb_apply);
uicontrol('tag', 'toggle labels', 'parent', fig, 'units', 'normalized', 'style', 'pushbutton', 'string', 'toggle label', 'value', 0, 'callback', @cb_redraw);
uicontrol('tag', 'toggle axes', 'parent', fig, 'units', 'normalized', 'style', 'pushbutton', 'string', 'toggle axes', 'value', 0, 'callback', @cb_redraw);
ft_uilayout(fig, 'tag', 'redisplaybtn',  'BackgroundColor', [0.8 0.8 0.8], 'width', 6*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'vpos', CONTROL_VOFFSET-3*CONTROL_HEIGHT, 'hpos', CONTROL_HOFFSET);
ft_uilayout(fig, 'tag', 'applybtn',      'BackgroundColor', [0.8 0.8 0.8], 'width', 6*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'vpos', CONTROL_VOFFSET-4*CONTROL_HEIGHT, 'hpos', CONTROL_HOFFSET);
ft_uilayout(fig, 'tag', 'toggle labels', 'BackgroundColor', [0.8 0.8 0.8], 'width', 6*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'vpos', CONTROL_VOFFSET-5*CONTROL_HEIGHT, 'hpos', CONTROL_HOFFSET);
ft_uilayout(fig, 'tag', 'toggle axes',   'BackgroundColor', [0.8 0.8 0.8], 'width', 6*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'vpos', CONTROL_VOFFSET-6*CONTROL_HEIGHT, 'hpos', CONTROL_HOFFSET);

% alpha ui (somehow not implemented, facealpha is fixed at 0.7
uicontrol('tag', 'alphaui', 'parent', fig, 'units', 'normalized', 'style', 'text', 'string', 'alpha', 'value', [], 'callback', []);
uicontrol('tag', 'alpha',   'parent', fig, 'units', 'normalized', 'style', 'edit', 'string', '0.7',   'value', [], 'callback', @cb_redraw);
ft_uilayout(fig, 'tag', 'alphaui', 'BackgroundColor', [0.8 0.8 0.8], 'width', 3*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'vpos', CONTROL_VOFFSET-7*CONTROL_HEIGHT, 'hpos', CONTROL_HOFFSET);
ft_uilayout(fig, 'tag', 'alpha',   'BackgroundColor', [0.8 0.8 0.8], 'width', 3*CONTROL_WIDTH, 'height', CONTROL_HEIGHT/2, 'vpos', CONTROL_VOFFSET-7*CONTROL_HEIGHT, 'hpos', CONTROL_HOFFSET+3*CONTROL_WIDTH);

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function cb_redraw(hObject, eventdata, handles)
fig = get(hObject, 'parent');
headshape = getappdata(fig, 'headshape');
elec      = getappdata(fig, 'elec');
target    = getappdata(fig, 'target');
% get the transformation details
rx = str2num(get(findobj(fig, 'tag', 'rx'), 'string'));
ry = str2num(get(findobj(fig, 'tag', 'ry'), 'string'));
rz = str2num(get(findobj(fig, 'tag', 'rz'), 'string'));
tx = str2num(get(findobj(fig, 'tag', 'tx'), 'string'));
ty = str2num(get(findobj(fig, 'tag', 'ty'), 'string'));
tz = str2num(get(findobj(fig, 'tag', 'tz'), 'string'));
sx = str2num(get(findobj(fig, 'tag', 'sx'), 'string'));
sy = str2num(get(findobj(fig, 'tag', 'sy'), 'string'));
sz = str2num(get(findobj(fig, 'tag', 'sz'), 'string'));
R = rotate   ([rx ry rz]);
T = translate([tx ty tz]);
S = scale    ([sx sy sz]);
H = S * T * R;
elec = ft_transform_sens(H, elec);
axis vis3d; cla
xlabel('x')
ylabel('y')
zlabel('z')

if ~isempty(target)
  disp('Plotting the target electrodes in blue');
  if size(target.elecpos, 2)==2
    hs = plot(target.elecpos(:,1), target.elecpos(:,2), 'b.', 'MarkerSize', 20);
  else
    hs = plot3(target.elecpos(:,1), target.elecpos(:,2), target.elecpos(:,3), 'b.', 'MarkerSize', 20);
  end
end

if ~isempty(headshape)
  % plot the faces of the 2D or 3D triangulation
  skin = [255 213 119]/255;
  ft_plot_mesh(headshape,'facecolor', skin,'EdgeColor','none','facealpha',0.7);
  lighting gouraud
  material shiny
  camlight
end

if isfield(elec, 'fid') && ~isempty(elec.fid.pos)
  disp('Plotting the fiducials in red');
  ft_plot_sens(elec.fid,'style', 'r*');
end

if get(findobj(fig, 'tag', 'toggle axes'), 'value')
  axis on
  grid on
else
  axis off
  grid on
end

hold on
if get(findobj(fig, 'tag', 'toggle labels'), 'value')
  ft_plot_sens(elec,'label', 'on');
else
  ft_plot_sens(elec,'label', 'off');
end

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function cb_apply(hObject, eventdata, handles)
fig = get(hObject, 'parent');
elec      = getappdata(fig, 'elec');
transform = getappdata(fig, 'transform');
% get the transformation details
rx = str2num(get(findobj(fig, 'tag', 'rx'), 'string'));
ry = str2num(get(findobj(fig, 'tag', 'ry'), 'string'));
rz = str2num(get(findobj(fig, 'tag', 'rz'), 'string'));
tx = str2num(get(findobj(fig, 'tag', 'tx'), 'string'));
ty = str2num(get(findobj(fig, 'tag', 'ty'), 'string'));
tz = str2num(get(findobj(fig, 'tag', 'tz'), 'string'));
sx = str2num(get(findobj(fig, 'tag', 'sx'), 'string'));
sy = str2num(get(findobj(fig, 'tag', 'sy'), 'string'));
sz = str2num(get(findobj(fig, 'tag', 'sz'), 'string'));
R = rotate   ([rx ry rz]);
T = translate([tx ty tz]);
S = scale    ([sx sy sz]);
H = S * T * R;
elec = ft_transform_headshape(H, elec);
transform = H * transform;
set(findobj(fig, 'tag', 'rx'), 'string', 0);
set(findobj(fig, 'tag', 'ry'), 'string', 0);
set(findobj(fig, 'tag', 'rz'), 'string', 0);
set(findobj(fig, 'tag', 'tx'), 'string', 0);
set(findobj(fig, 'tag', 'ty'), 'string', 0);
set(findobj(fig, 'tag', 'tz'), 'string', 0);
set(findobj(fig, 'tag', 'sx'), 'string', 1);
set(findobj(fig, 'tag', 'sy'), 'string', 1);
set(findobj(fig, 'tag', 'sz'), 'string', 1);
setappdata(fig, 'elec', elec);
setappdata(fig, 'transform', transform);
cb_redraw(hObject);

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
function cb_close(hObject, eventdata, handles)
% make the current transformation permanent and subsequently allow deleting the figure
cb_apply(gca);
% get the updated electrode from the figure
fig    = hObject;
% hmmm, this is ugly
global norm
norm   = getappdata(fig, 'elec');
norm.m = getappdata(fig, 'transform');
set(fig, 'CloseRequestFcn', @delete);
delete(fig);