FAQ

Which inverter brands are you using with TelsaSolarCharger?

Check out this page.

How to migrate from TeslaSolarCharger to evSolarCharger?

Please see this page.

How to set up home location in HA?

Home location must be defined in HA in order for HA to detect Tesla is at home. Settings > System > General > Edit location

Error: TypeError: '>' not supported between instances of 'str' and 'int'

Trace the automation to find the variable causing the error, ie. Settings > Automations > Select your automation > Trace. See example on how to trace. Most likely issue with your "Grid Power Net" sensor. Check out this page.

How to workaround limits with number of Tesla API calls?

See suggestion from this thread. See note from pkuehnel on Bluetooth device placement.

Interesting discussion from PVi1 on 3 phase charger voltage.

See this thread.

How to guarantee car has minimum charge current when there is not enough solar electricity?

Use grid electricity by setting the minimum charge current above zero in the Blueprint config. Do not confuse daytime/nighttime power offsets with minimum charge current setting. Daytime/nighttime power offsets are shared among appliances of which the car charger has the lowest priority.

How to change Enphase update frequency?

See this.

What does the home battery config do in the Blueprint?

It currently does nothing, so please leave it set to default in the config. It is just a placeholder for future enhancement.

Sites of interest.