Pager decoder sometimes doesn't work

[choupette-change]

If we put several pager decoders (with "duplicate channel") on the same workspace and we adjust the frequency, the decoding of the messages of the other 2 "pager decoders", in my case, seem capricious?? What am I doing wrong? The signals decoded in "Waves forms" are ok for the 3 frequencies??
Best regards

[srcejon]

Can you decode each channel ok just using a single demod?

[choupette-change]

Yes, if I take the decoders one by one it works. I close and reopen Sdrangel between each frequency test.

[srcejon]

Ok - can you please record an IQ .wav file so I can give it a try? Thanks.

[choupette-change]

https://drive.google.com/file/d/1FbggiGkQ1Mis31ueqaxpSR3mY07x6C62/view?usp=drive_link

[srcejon]

Thanks.

[srcejon]

Please ignore the last message - I made a mistake.

If I replay your IQ file with 3 demods, I get:

What do you get? What do you think is wrong?

[choupette-change]

I still have the same problem, I don't understand why? I lowered the gain to avoid saturating the receiver (I am near the transmitter)?? Can you send me your settings files to test them with my SDRangel?

[srcejon]

Ok, playing around some more, it seems as though there's a bug. Sometimes it works, sometimes it doesn't - even though the settings appear the same in the GUI. Not sure why yet.

[choupette-change]

Absolutely, I also noticed the random operation of this (these) decoders. Best regards

[srcejon]

Should be fixed by the above patch.