You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Under Configuration - Integrations - Load Management, the current isn't calculated but always shows 0.0. For my grid meter I use the slimmemeter-v2, and reads current_phase_1, current_phase_2 and current_phase_3.
In the Load Management I would expect the sum of these three.
See the screenshot below. At the time of creating the screenshot,
current_phase_1 = 1
current_phase_2 = 2
current_phase_3 = 0
Steps to reproduce
Use Slimmetermeter-2 template for the meter
Goto Load Management under Configuration
Read the current for the main
...
Configuration details
meters:
- name: slimmelezertype: templatetemplate: slimmelezer-V2usage: gridhost: 10.0.20.12 # IP address or hostnamecircuits:
- name: main # unique name, used as reference, e.g. as parent in other circuitstitle: Main Circuit # used in the UImaxcurrent: 40maxPower: 17000meter: slimmelezer # associated meter to monitor the power consumption (optional)parent: # no parent, this is the root circuit
Describe the bug
Under Configuration - Integrations - Load Management, the current isn't calculated but always shows 0.0. For my grid meter I use the slimmemeter-v2, and reads current_phase_1, current_phase_2 and current_phase_3.
In the Load Management I would expect the sum of these three.
See the screenshot below. At the time of creating the screenshot,
current_phase_1 = 1
current_phase_2 = 2
current_phase_3 = 0
Steps to reproduce
...
Configuration details
Log details
What type of operating system are you running?
HomeAssistant Add-on
Nightly build
Version
0.130.13
The text was updated successfully, but these errors were encountered: