EM2GO - Phasenumschaltung (EMH011AC1RW) #12382
Replies: 4 comments 23 replies
-
Die Phasenumschaltung wird immer von evcc ausgelöst und an die entsprechende API der Box gesendet. Laut Doku ist aber keine Phasenumschaltung implementiert: https://docs.evcc.io/docs/devices/chargers/#em2go-pro-power-ocpponc Das kann daran liegen, dass es einfach noch keiner gemacht hat oder das die API aus irgendeinem anderen Grund nicht so funktioniert. Ich halte Automatische Phasenumschaltung für überbewertet. Die Sommertage wo Mittags die Sonne so scheint und das Auto zu Hause ist, sind nicht die Tage wo man die Zusätzliche Leistung der anderen Phasen braucht |
Beta Was this translation helpful? Give feedback.
-
Hallo zusammen, Das bedeutet meiner Ansicht nach, dass entweder die Modbus Konfiguration der Box falsch ist, die Box defekt ist oder es ein grundsätzliches Problem mit der Modbus TCP Implementierung dieser Box gibt. Bei der Konfiguration habe ich mich strikt an das Benutzerhandbuch gehalten: zunächst Bluetooth Verbindung aufbauen, um die Box via App (EM2GO connect) ins WLAN aufzunehmen, dann Lastmanagement und Modbus TCP aktivieren. Die Box wartet auch auf Port 502 auf eingehende Verbindungen: Hat hier jemand einen Tip, was ich noch versuchen sollte? |
Beta Was this translation helpful? Give feedback.
-
Hallo Renatus, Vielen Dank auch für das Modbus-tool / immer hilfreich. |
Beta Was this translation helpful? Give feedback.
-
Gibt es mittlerweile etwas neues zur autom. Phasenumschaltung bei der em2go home? |
Beta Was this translation helpful? Give feedback.
-
Hallo zusammen,
ich bin auf der Suche nach einer für mich passenden Wallbox und habe dabei die EM2GO AC Wallbox Home 11kW (EMH011AC1RW) gefunden.
Die Wallbox ist günstig, kann am Gerät bedient werden, hat einen CEE Stecker, hat ein Display und die Kabel sind lang genug.
Selbstverständlich möchte ich aber auch PV-Überschussladen mit Phasenumschaltung.
Der Hersteller schreibt:
Sie kann an Photovoltaikanlagen und Batteriespeicher über das ModBus TCP-Protokoll via WLAN angeschlossen werden. Für die Nutzung von PV-Überschussstrom, kann die Wallbox zwischen einer und drei Phasen umschalten.
Per TCP Modbus kann hier von 1 Phase auf 3 Phasen umgeschaltet werden, d.h. man schreibt in ein Register 1 oder 3 rein - nach meinem Verständnis ist das nur eine halb-automatische Phasenumschaltung.
Frage 1: Kann dies mit evcc problemlos gesteuert werden oder wäre es besser nach einer Wallbox mit vollautomatischer Phasenumschaltung zu suchen?
Frage 2: Weiter ist diese Wallbox nicht in der Liste der von evcc unterstützten Wallboxen zu finden, obwohl EM2GO als einer der wenigen Sponsoren gelistet ist - weiß jemand, ob das Template "EM2GO Pro Power, OCPP/ONC" für diese Wallbox geeignet ist und damit auch die (halb-automatische) Phasenumschaltung unterstützt wird?
Vielen Dank und Gruß,
Christian
Beta Was this translation helpful? Give feedback.
All reactions