HomeWorksMQTTBridge

A Python based RS232 to MQTT bridge for Lutron HomeWorks (the original version from mid-1990's)

Quick and dirty instructions:

copy HomeWorks.py to somewhere (e.g. /opt/homeworks/)
install python3
ensure these python3 packages are available:
- pyserial
- python-daemon
- paho-mqtt

serial port enumeration and MQTT settings

Find the following line in HomeWorks.py and edit to suite.

h = HomeWorks(serial_port='/dev/ttyUSB0', broker='localhost', username='pi', password='homeworks')

Edit homeworks.service and then copy to /etc/systemd/system