This example application runs out of the box on the STM32 IOT01A development kits.
It uses the on board WiFi and the temperature sensor to send data to a TCP server and expects to receive the same data back (The typical echo server).
NOTE: There are multiple variants of this kit, so the example might need modifications.
- STM32 IOT01A development kit
- To build the example, you need to have link:https://rustup.rs/[rustup].
- To flash the example on the device, you need
probe-runinstalled (cargo install probe-run).
Modify main.rs to use credentials for your local WiFi network.
To run the firmware using a given chip:
If you’re experiencing problems, try setting the VID:PID values to that of your probe (you can find that from lsusb once your board is powered).