See README.md in the subfolder
See README.md in the subfolder
- Taken from: The "Really Universal Soldering Controller" project.
- Source: http://dangerousprototypes.com/forum/index.php?topic=7218.0#p66362
- Outer shell, and heater negative (middle) terminal connected together to Vout1- and EARTH
- heater positive (bottom terminal) connected to Vout1+ and SENSEA
- 1k resistor between ID and Vout1-
- 5.6k resistor between ID and Vout2-
- Outer shell, PTC negative and heater negative connected to EARTH, Vout1- and SENSEB
- Heater positive connected to Vout1+
- PTC positive connected to SENSEA
- 1k between ID and Vout1-
- 820ohm between ID and Vout2-
- Outer shell (green wire) connected to EARTH and SENSEB
- Heater positive(red wire) connected to Vout1- and SENSEA
- Heater negative(blue wire) connected to Vout1+
- 150ohm between ID and Vout1-
- 5.6k between ID and Vout2-
- Outer shell (green wire) connected to EARTH and SENSEB
- Heater negative (middle terminal, blue wire) connected to Vout1-
- Heater positive (smaller terminal, red wire) connected to Vout1+ and SENSEA
- 3.0k between ID and Vout1-
- 5.6k between ID and Vout2-
- Outer shell of both tips (green wire) connected to EARTH
- Heater 1 negative (blue wire) connected to Vout1-
- Heater 1 positive (red wire) connected to Vout1+ and SENSEA
- Heater 2 negative (brown wire) connected to Vout2-
- Heater 2 positive (yellow wire) connected to Vout2+ and SENSEB
- 1.0k between ID and Vout1-
- Outer shell, PTC negative and heater negative (white, black and brown wires) connected to EARTH, Vout1- and SENSEB
- Heater positive (blue wire) connected to Vout1+
- PTC positive (red wire) connected to SENSEA
- 120ohm between ID and Vout1-
- 5.6k between ID and Vout2-
- Outer shell and Heater/PTC negative (pink and white wires) connected to EARTH, Vout1- and SENSEB
- Heater/PTC positive (black wire) connected to Vout1+ and SENSEA
- 300ohm between ID and Vout1-
- 110ohm between ID and Vout2-