From 577408b0b4b8c62c10fdf0181e6e77878b51bc62 Mon Sep 17 00:00:00 2001
From: dokar3 <68095777+dokar3@users.noreply.github.com>
Date: Wed, 3 Jul 2024 11:02:10 +0800
Subject: [PATCH 1/2] Commit filemode for scripts

---
 gradlew                            | 498 ++++++++++++++---------------
 quickjs/native/cmake/zig-ar.sh     |   0
 quickjs/native/cmake/zig-ranlib.sh |   0
 3 files changed, 249 insertions(+), 249 deletions(-)
 mode change 100644 => 100755 gradlew
 mode change 100644 => 100755 quickjs/native/cmake/zig-ar.sh
 mode change 100644 => 100755 quickjs/native/cmake/zig-ranlib.sh

diff --git a/gradlew b/gradlew
old mode 100644
new mode 100755
index b740cf1..191c4ee
--- a/gradlew
+++ b/gradlew
@@ -1,249 +1,249 @@
-#!/bin/sh
-
-#
-# Copyright © 2015-2021 the original authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-##############################################################################
-#
-#   Gradle start up script for POSIX generated by Gradle.
-#
-#   Important for running:
-#
-#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
-#       noncompliant, but you have some other compliant shell such as ksh or
-#       bash, then to run this script, type that shell name before the whole
-#       command line, like:
-#
-#           ksh Gradle
-#
-#       Busybox and similar reduced shells will NOT work, because this script
-#       requires all of these POSIX shell features:
-#         * functions;
-#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
-#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
-#         * compound commands having a testable exit status, especially «case»;
-#         * various built-in commands including «command», «set», and «ulimit».
-#
-#   Important for patching:
-#
-#   (2) This script targets any POSIX shell, so it avoids extensions provided
-#       by Bash, Ksh, etc; in particular arrays are avoided.
-#
-#       The "traditional" practice of packing multiple parameters into a
-#       space-separated string is a well documented source of bugs and security
-#       problems, so this is (mostly) avoided, by progressively accumulating
-#       options in "$@", and eventually passing that to Java.
-#
-#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
-#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
-#       see the in-line comments for details.
-#
-#       There are tweaks for specific operating systems such as AIX, CygWin,
-#       Darwin, MinGW, and NonStop.
-#
-#   (3) This script is generated from the Groovy template
-#       https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
-#       within the Gradle project.
-#
-#       You can find Gradle at https://github.com/gradle/gradle/.
-#
-##############################################################################
-
-# Attempt to set APP_HOME
-
-# Resolve links: $0 may be a link
-app_path=$0
-
-# Need this for daisy-chained symlinks.
-while
-    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
-    [ -h "$app_path" ]
-do
-    ls=$( ls -ld "$app_path" )
-    link=${ls#*' -> '}
-    case $link in             #(
-      /*)   app_path=$link ;; #(
-      *)    app_path=$APP_HOME$link ;;
-    esac
-done
-
-# This is normally unused
-# shellcheck disable=SC2034
-APP_BASE_NAME=${0##*/}
-# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
-APP_HOME=$( cd "${APP_HOME:-./}" > /dev/null && pwd -P ) || exit
-
-# Use the maximum available, or set MAX_FD != -1 to use that value.
-MAX_FD=maximum
-
-warn () {
-    echo "$*"
-} >&2
-
-die () {
-    echo
-    echo "$*"
-    echo
-    exit 1
-} >&2
-
-# OS specific support (must be 'true' or 'false').
-cygwin=false
-msys=false
-darwin=false
-nonstop=false
-case "$( uname )" in                #(
-  CYGWIN* )         cygwin=true  ;; #(
-  Darwin* )         darwin=true  ;; #(
-  MSYS* | MINGW* )  msys=true    ;; #(
-  NONSTOP* )        nonstop=true ;;
-esac
-
-CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
-
-
-# Determine the Java command to use to start the JVM.
-if [ -n "$JAVA_HOME" ] ; then
-    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
-        # IBM's JDK on AIX uses strange locations for the executables
-        JAVACMD=$JAVA_HOME/jre/sh/java
-    else
-        JAVACMD=$JAVA_HOME/bin/java
-    fi
-    if [ ! -x "$JAVACMD" ] ; then
-        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
-
-Please set the JAVA_HOME variable in your environment to match the
-location of your Java installation."
-    fi
-else
-    JAVACMD=java
-    if ! command -v java >/dev/null 2>&1
-    then
-        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
-
-Please set the JAVA_HOME variable in your environment to match the
-location of your Java installation."
-    fi
-fi
-
-# Increase the maximum file descriptors if we can.
-if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
-    case $MAX_FD in #(
-      max*)
-        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
-        # shellcheck disable=SC2039,SC3045
-        MAX_FD=$( ulimit -H -n ) ||
-            warn "Could not query maximum file descriptor limit"
-    esac
-    case $MAX_FD in  #(
-      '' | soft) :;; #(
-      *)
-        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
-        # shellcheck disable=SC2039,SC3045
-        ulimit -n "$MAX_FD" ||
-            warn "Could not set maximum file descriptor limit to $MAX_FD"
-    esac
-fi
-
-# Collect all arguments for the java command, stacking in reverse order:
-#   * args from the command line
-#   * the main class name
-#   * -classpath
-#   * -D...appname settings
-#   * --module-path (only if needed)
-#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
-
-# For Cygwin or MSYS, switch paths to Windows format before running java
-if "$cygwin" || "$msys" ; then
-    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
-    CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" )
-
-    JAVACMD=$( cygpath --unix "$JAVACMD" )
-
-    # Now convert the arguments - kludge to limit ourselves to /bin/sh
-    for arg do
-        if
-            case $arg in                                #(
-              -*)   false ;;                            # don't mess with options #(
-              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
-                    [ -e "$t" ] ;;                      #(
-              *)    false ;;
-            esac
-        then
-            arg=$( cygpath --path --ignore --mixed "$arg" )
-        fi
-        # Roll the args list around exactly as many times as the number of
-        # args, so each arg winds up back in the position where it started, but
-        # possibly modified.
-        #
-        # NB: a `for` loop captures its iteration list before it begins, so
-        # changing the positional parameters here affects neither the number of
-        # iterations, nor the values presented in `arg`.
-        shift                   # remove old arg
-        set -- "$@" "$arg"      # push replacement arg
-    done
-fi
-
-
-# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
-DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
-
-# Collect all arguments for the java command:
-#   * DEFAULT_JVM_OPTS, JAVA_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
-#     and any embedded shellness will be escaped.
-#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
-#     treated as '${Hostname}' itself on the command line.
-
-set -- \
-        "-Dorg.gradle.appname=$APP_BASE_NAME" \
-        -classpath "$CLASSPATH" \
-        org.gradle.wrapper.GradleWrapperMain \
-        "$@"
-
-# Stop when "xargs" is not available.
-if ! command -v xargs >/dev/null 2>&1
-then
-    die "xargs is not available"
-fi
-
-# Use "xargs" to parse quoted args.
-#
-# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
-#
-# In Bash we could simply go:
-#
-#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
-#   set -- "${ARGS[@]}" "$@"
-#
-# but POSIX shell has neither arrays nor command substitution, so instead we
-# post-process each arg (as a line of input to sed) to backslash-escape any
-# character that might be a shell metacharacter, then use eval to reverse
-# that process (while maintaining the separation between arguments), and wrap
-# the whole thing up as a single "set" statement.
-#
-# This will of course break if any of these variables contains a newline or
-# an unmatched quote.
-#
-
-eval "set -- $(
-        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
-        xargs -n1 |
-        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
-        tr '\n' ' '
-    )" '"$@"'
-
-exec "$JAVACMD" "$@"
+#!/bin/sh
+
+#
+# Copyright © 2015-2021 the original authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+##############################################################################
+#
+#   Gradle start up script for POSIX generated by Gradle.
+#
+#   Important for running:
+#
+#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
+#       noncompliant, but you have some other compliant shell such as ksh or
+#       bash, then to run this script, type that shell name before the whole
+#       command line, like:
+#
+#           ksh Gradle
+#
+#       Busybox and similar reduced shells will NOT work, because this script
+#       requires all of these POSIX shell features:
+#         * functions;
+#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
+#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
+#         * compound commands having a testable exit status, especially «case»;
+#         * various built-in commands including «command», «set», and «ulimit».
+#
+#   Important for patching:
+#
+#   (2) This script targets any POSIX shell, so it avoids extensions provided
+#       by Bash, Ksh, etc; in particular arrays are avoided.
+#
+#       The "traditional" practice of packing multiple parameters into a
+#       space-separated string is a well documented source of bugs and security
+#       problems, so this is (mostly) avoided, by progressively accumulating
+#       options in "$@", and eventually passing that to Java.
+#
+#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
+#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
+#       see the in-line comments for details.
+#
+#       There are tweaks for specific operating systems such as AIX, CygWin,
+#       Darwin, MinGW, and NonStop.
+#
+#   (3) This script is generated from the Groovy template
+#       https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
+#       within the Gradle project.
+#
+#       You can find Gradle at https://github.com/gradle/gradle/.
+#
+##############################################################################
+
+# Attempt to set APP_HOME
+
+# Resolve links: $0 may be a link
+app_path=$0
+
+# Need this for daisy-chained symlinks.
+while
+    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
+    [ -h "$app_path" ]
+do
+    ls=$( ls -ld "$app_path" )
+    link=${ls#*' -> '}
+    case $link in             #(
+      /*)   app_path=$link ;; #(
+      *)    app_path=$APP_HOME$link ;;
+    esac
+done
+
+# This is normally unused
+# shellcheck disable=SC2034
+APP_BASE_NAME=${0##*/}
+# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
+APP_HOME=$( cd "${APP_HOME:-./}" > /dev/null && pwd -P ) || exit
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD=maximum
+
+warn () {
+    echo "$*"
+} >&2
+
+die () {
+    echo
+    echo "$*"
+    echo
+    exit 1
+} >&2
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+nonstop=false
+case "$( uname )" in                #(
+  CYGWIN* )         cygwin=true  ;; #(
+  Darwin* )         darwin=true  ;; #(
+  MSYS* | MINGW* )  msys=true    ;; #(
+  NONSTOP* )        nonstop=true ;;
+esac
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD=$JAVA_HOME/jre/sh/java
+    else
+        JAVACMD=$JAVA_HOME/bin/java
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD=java
+    if ! command -v java >/dev/null 2>&1
+    then
+        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+fi
+
+# Increase the maximum file descriptors if we can.
+if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
+    case $MAX_FD in #(
+      max*)
+        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        MAX_FD=$( ulimit -H -n ) ||
+            warn "Could not query maximum file descriptor limit"
+    esac
+    case $MAX_FD in  #(
+      '' | soft) :;; #(
+      *)
+        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        ulimit -n "$MAX_FD" ||
+            warn "Could not set maximum file descriptor limit to $MAX_FD"
+    esac
+fi
+
+# Collect all arguments for the java command, stacking in reverse order:
+#   * args from the command line
+#   * the main class name
+#   * -classpath
+#   * -D...appname settings
+#   * --module-path (only if needed)
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
+
+# For Cygwin or MSYS, switch paths to Windows format before running java
+if "$cygwin" || "$msys" ; then
+    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
+    CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" )
+
+    JAVACMD=$( cygpath --unix "$JAVACMD" )
+
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    for arg do
+        if
+            case $arg in                                #(
+              -*)   false ;;                            # don't mess with options #(
+              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
+                    [ -e "$t" ] ;;                      #(
+              *)    false ;;
+            esac
+        then
+            arg=$( cygpath --path --ignore --mixed "$arg" )
+        fi
+        # Roll the args list around exactly as many times as the number of
+        # args, so each arg winds up back in the position where it started, but
+        # possibly modified.
+        #
+        # NB: a `for` loop captures its iteration list before it begins, so
+        # changing the positional parameters here affects neither the number of
+        # iterations, nor the values presented in `arg`.
+        shift                   # remove old arg
+        set -- "$@" "$arg"      # push replacement arg
+    done
+fi
+
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
+
+# Collect all arguments for the java command:
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
+#     and any embedded shellness will be escaped.
+#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
+#     treated as '${Hostname}' itself on the command line.
+
+set -- \
+        "-Dorg.gradle.appname=$APP_BASE_NAME" \
+        -classpath "$CLASSPATH" \
+        org.gradle.wrapper.GradleWrapperMain \
+        "$@"
+
+# Stop when "xargs" is not available.
+if ! command -v xargs >/dev/null 2>&1
+then
+    die "xargs is not available"
+fi
+
+# Use "xargs" to parse quoted args.
+#
+# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
+#
+# In Bash we could simply go:
+#
+#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
+#   set -- "${ARGS[@]}" "$@"
+#
+# but POSIX shell has neither arrays nor command substitution, so instead we
+# post-process each arg (as a line of input to sed) to backslash-escape any
+# character that might be a shell metacharacter, then use eval to reverse
+# that process (while maintaining the separation between arguments), and wrap
+# the whole thing up as a single "set" statement.
+#
+# This will of course break if any of these variables contains a newline or
+# an unmatched quote.
+#
+
+eval "set -- $(
+        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
+        xargs -n1 |
+        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
+        tr '\n' ' '
+    )" '"$@"'
+
+exec "$JAVACMD" "$@"
diff --git a/quickjs/native/cmake/zig-ar.sh b/quickjs/native/cmake/zig-ar.sh
old mode 100644
new mode 100755
diff --git a/quickjs/native/cmake/zig-ranlib.sh b/quickjs/native/cmake/zig-ranlib.sh
old mode 100644
new mode 100755

From 142c8141647a6d7a6ed9ca2383b36b39487d4e48 Mon Sep 17 00:00:00 2001
From: dokar3 <68095777+dokar3@users.noreply.github.com>
Date: Wed, 3 Jul 2024 11:11:47 +0800
Subject: [PATCH 2/2] Update line separators

---
 gradlew                            | 498 ++++++++++++++---------------
 quickjs/native/cmake/zig-ar.sh     |   0
 quickjs/native/cmake/zig-ranlib.sh |   0
 3 files changed, 249 insertions(+), 249 deletions(-)
 mode change 100755 => 100644 gradlew
 mode change 100755 => 100644 quickjs/native/cmake/zig-ar.sh
 mode change 100755 => 100644 quickjs/native/cmake/zig-ranlib.sh

diff --git a/gradlew b/gradlew
old mode 100755
new mode 100644
index 191c4ee..b740cf1
--- a/gradlew
+++ b/gradlew
@@ -1,249 +1,249 @@
-#!/bin/sh
-
-#
-# Copyright © 2015-2021 the original authors.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      https://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-##############################################################################
-#
-#   Gradle start up script for POSIX generated by Gradle.
-#
-#   Important for running:
-#
-#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
-#       noncompliant, but you have some other compliant shell such as ksh or
-#       bash, then to run this script, type that shell name before the whole
-#       command line, like:
-#
-#           ksh Gradle
-#
-#       Busybox and similar reduced shells will NOT work, because this script
-#       requires all of these POSIX shell features:
-#         * functions;
-#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
-#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
-#         * compound commands having a testable exit status, especially «case»;
-#         * various built-in commands including «command», «set», and «ulimit».
-#
-#   Important for patching:
-#
-#   (2) This script targets any POSIX shell, so it avoids extensions provided
-#       by Bash, Ksh, etc; in particular arrays are avoided.
-#
-#       The "traditional" practice of packing multiple parameters into a
-#       space-separated string is a well documented source of bugs and security
-#       problems, so this is (mostly) avoided, by progressively accumulating
-#       options in "$@", and eventually passing that to Java.
-#
-#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
-#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
-#       see the in-line comments for details.
-#
-#       There are tweaks for specific operating systems such as AIX, CygWin,
-#       Darwin, MinGW, and NonStop.
-#
-#   (3) This script is generated from the Groovy template
-#       https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
-#       within the Gradle project.
-#
-#       You can find Gradle at https://github.com/gradle/gradle/.
-#
-##############################################################################
-
-# Attempt to set APP_HOME
-
-# Resolve links: $0 may be a link
-app_path=$0
-
-# Need this for daisy-chained symlinks.
-while
-    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
-    [ -h "$app_path" ]
-do
-    ls=$( ls -ld "$app_path" )
-    link=${ls#*' -> '}
-    case $link in             #(
-      /*)   app_path=$link ;; #(
-      *)    app_path=$APP_HOME$link ;;
-    esac
-done
-
-# This is normally unused
-# shellcheck disable=SC2034
-APP_BASE_NAME=${0##*/}
-# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
-APP_HOME=$( cd "${APP_HOME:-./}" > /dev/null && pwd -P ) || exit
-
-# Use the maximum available, or set MAX_FD != -1 to use that value.
-MAX_FD=maximum
-
-warn () {
-    echo "$*"
-} >&2
-
-die () {
-    echo
-    echo "$*"
-    echo
-    exit 1
-} >&2
-
-# OS specific support (must be 'true' or 'false').
-cygwin=false
-msys=false
-darwin=false
-nonstop=false
-case "$( uname )" in                #(
-  CYGWIN* )         cygwin=true  ;; #(
-  Darwin* )         darwin=true  ;; #(
-  MSYS* | MINGW* )  msys=true    ;; #(
-  NONSTOP* )        nonstop=true ;;
-esac
-
-CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
-
-
-# Determine the Java command to use to start the JVM.
-if [ -n "$JAVA_HOME" ] ; then
-    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
-        # IBM's JDK on AIX uses strange locations for the executables
-        JAVACMD=$JAVA_HOME/jre/sh/java
-    else
-        JAVACMD=$JAVA_HOME/bin/java
-    fi
-    if [ ! -x "$JAVACMD" ] ; then
-        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
-
-Please set the JAVA_HOME variable in your environment to match the
-location of your Java installation."
-    fi
-else
-    JAVACMD=java
-    if ! command -v java >/dev/null 2>&1
-    then
-        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
-
-Please set the JAVA_HOME variable in your environment to match the
-location of your Java installation."
-    fi
-fi
-
-# Increase the maximum file descriptors if we can.
-if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
-    case $MAX_FD in #(
-      max*)
-        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
-        # shellcheck disable=SC2039,SC3045
-        MAX_FD=$( ulimit -H -n ) ||
-            warn "Could not query maximum file descriptor limit"
-    esac
-    case $MAX_FD in  #(
-      '' | soft) :;; #(
-      *)
-        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
-        # shellcheck disable=SC2039,SC3045
-        ulimit -n "$MAX_FD" ||
-            warn "Could not set maximum file descriptor limit to $MAX_FD"
-    esac
-fi
-
-# Collect all arguments for the java command, stacking in reverse order:
-#   * args from the command line
-#   * the main class name
-#   * -classpath
-#   * -D...appname settings
-#   * --module-path (only if needed)
-#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
-
-# For Cygwin or MSYS, switch paths to Windows format before running java
-if "$cygwin" || "$msys" ; then
-    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
-    CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" )
-
-    JAVACMD=$( cygpath --unix "$JAVACMD" )
-
-    # Now convert the arguments - kludge to limit ourselves to /bin/sh
-    for arg do
-        if
-            case $arg in                                #(
-              -*)   false ;;                            # don't mess with options #(
-              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
-                    [ -e "$t" ] ;;                      #(
-              *)    false ;;
-            esac
-        then
-            arg=$( cygpath --path --ignore --mixed "$arg" )
-        fi
-        # Roll the args list around exactly as many times as the number of
-        # args, so each arg winds up back in the position where it started, but
-        # possibly modified.
-        #
-        # NB: a `for` loop captures its iteration list before it begins, so
-        # changing the positional parameters here affects neither the number of
-        # iterations, nor the values presented in `arg`.
-        shift                   # remove old arg
-        set -- "$@" "$arg"      # push replacement arg
-    done
-fi
-
-
-# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
-DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
-
-# Collect all arguments for the java command:
-#   * DEFAULT_JVM_OPTS, JAVA_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
-#     and any embedded shellness will be escaped.
-#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
-#     treated as '${Hostname}' itself on the command line.
-
-set -- \
-        "-Dorg.gradle.appname=$APP_BASE_NAME" \
-        -classpath "$CLASSPATH" \
-        org.gradle.wrapper.GradleWrapperMain \
-        "$@"
-
-# Stop when "xargs" is not available.
-if ! command -v xargs >/dev/null 2>&1
-then
-    die "xargs is not available"
-fi
-
-# Use "xargs" to parse quoted args.
-#
-# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
-#
-# In Bash we could simply go:
-#
-#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
-#   set -- "${ARGS[@]}" "$@"
-#
-# but POSIX shell has neither arrays nor command substitution, so instead we
-# post-process each arg (as a line of input to sed) to backslash-escape any
-# character that might be a shell metacharacter, then use eval to reverse
-# that process (while maintaining the separation between arguments), and wrap
-# the whole thing up as a single "set" statement.
-#
-# This will of course break if any of these variables contains a newline or
-# an unmatched quote.
-#
-
-eval "set -- $(
-        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
-        xargs -n1 |
-        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
-        tr '\n' ' '
-    )" '"$@"'
-
-exec "$JAVACMD" "$@"
+#!/bin/sh
+
+#
+# Copyright © 2015-2021 the original authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+##############################################################################
+#
+#   Gradle start up script for POSIX generated by Gradle.
+#
+#   Important for running:
+#
+#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
+#       noncompliant, but you have some other compliant shell such as ksh or
+#       bash, then to run this script, type that shell name before the whole
+#       command line, like:
+#
+#           ksh Gradle
+#
+#       Busybox and similar reduced shells will NOT work, because this script
+#       requires all of these POSIX shell features:
+#         * functions;
+#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
+#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
+#         * compound commands having a testable exit status, especially «case»;
+#         * various built-in commands including «command», «set», and «ulimit».
+#
+#   Important for patching:
+#
+#   (2) This script targets any POSIX shell, so it avoids extensions provided
+#       by Bash, Ksh, etc; in particular arrays are avoided.
+#
+#       The "traditional" practice of packing multiple parameters into a
+#       space-separated string is a well documented source of bugs and security
+#       problems, so this is (mostly) avoided, by progressively accumulating
+#       options in "$@", and eventually passing that to Java.
+#
+#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
+#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
+#       see the in-line comments for details.
+#
+#       There are tweaks for specific operating systems such as AIX, CygWin,
+#       Darwin, MinGW, and NonStop.
+#
+#   (3) This script is generated from the Groovy template
+#       https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
+#       within the Gradle project.
+#
+#       You can find Gradle at https://github.com/gradle/gradle/.
+#
+##############################################################################
+
+# Attempt to set APP_HOME
+
+# Resolve links: $0 may be a link
+app_path=$0
+
+# Need this for daisy-chained symlinks.
+while
+    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
+    [ -h "$app_path" ]
+do
+    ls=$( ls -ld "$app_path" )
+    link=${ls#*' -> '}
+    case $link in             #(
+      /*)   app_path=$link ;; #(
+      *)    app_path=$APP_HOME$link ;;
+    esac
+done
+
+# This is normally unused
+# shellcheck disable=SC2034
+APP_BASE_NAME=${0##*/}
+# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
+APP_HOME=$( cd "${APP_HOME:-./}" > /dev/null && pwd -P ) || exit
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD=maximum
+
+warn () {
+    echo "$*"
+} >&2
+
+die () {
+    echo
+    echo "$*"
+    echo
+    exit 1
+} >&2
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+nonstop=false
+case "$( uname )" in                #(
+  CYGWIN* )         cygwin=true  ;; #(
+  Darwin* )         darwin=true  ;; #(
+  MSYS* | MINGW* )  msys=true    ;; #(
+  NONSTOP* )        nonstop=true ;;
+esac
+
+CLASSPATH=$APP_HOME/gradle/wrapper/gradle-wrapper.jar
+
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD=$JAVA_HOME/jre/sh/java
+    else
+        JAVACMD=$JAVA_HOME/bin/java
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD=java
+    if ! command -v java >/dev/null 2>&1
+    then
+        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+fi
+
+# Increase the maximum file descriptors if we can.
+if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
+    case $MAX_FD in #(
+      max*)
+        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        MAX_FD=$( ulimit -H -n ) ||
+            warn "Could not query maximum file descriptor limit"
+    esac
+    case $MAX_FD in  #(
+      '' | soft) :;; #(
+      *)
+        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        ulimit -n "$MAX_FD" ||
+            warn "Could not set maximum file descriptor limit to $MAX_FD"
+    esac
+fi
+
+# Collect all arguments for the java command, stacking in reverse order:
+#   * args from the command line
+#   * the main class name
+#   * -classpath
+#   * -D...appname settings
+#   * --module-path (only if needed)
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
+
+# For Cygwin or MSYS, switch paths to Windows format before running java
+if "$cygwin" || "$msys" ; then
+    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
+    CLASSPATH=$( cygpath --path --mixed "$CLASSPATH" )
+
+    JAVACMD=$( cygpath --unix "$JAVACMD" )
+
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    for arg do
+        if
+            case $arg in                                #(
+              -*)   false ;;                            # don't mess with options #(
+              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
+                    [ -e "$t" ] ;;                      #(
+              *)    false ;;
+            esac
+        then
+            arg=$( cygpath --path --ignore --mixed "$arg" )
+        fi
+        # Roll the args list around exactly as many times as the number of
+        # args, so each arg winds up back in the position where it started, but
+        # possibly modified.
+        #
+        # NB: a `for` loop captures its iteration list before it begins, so
+        # changing the positional parameters here affects neither the number of
+        # iterations, nor the values presented in `arg`.
+        shift                   # remove old arg
+        set -- "$@" "$arg"      # push replacement arg
+    done
+fi
+
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
+
+# Collect all arguments for the java command:
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
+#     and any embedded shellness will be escaped.
+#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
+#     treated as '${Hostname}' itself on the command line.
+
+set -- \
+        "-Dorg.gradle.appname=$APP_BASE_NAME" \
+        -classpath "$CLASSPATH" \
+        org.gradle.wrapper.GradleWrapperMain \
+        "$@"
+
+# Stop when "xargs" is not available.
+if ! command -v xargs >/dev/null 2>&1
+then
+    die "xargs is not available"
+fi
+
+# Use "xargs" to parse quoted args.
+#
+# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
+#
+# In Bash we could simply go:
+#
+#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
+#   set -- "${ARGS[@]}" "$@"
+#
+# but POSIX shell has neither arrays nor command substitution, so instead we
+# post-process each arg (as a line of input to sed) to backslash-escape any
+# character that might be a shell metacharacter, then use eval to reverse
+# that process (while maintaining the separation between arguments), and wrap
+# the whole thing up as a single "set" statement.
+#
+# This will of course break if any of these variables contains a newline or
+# an unmatched quote.
+#
+
+eval "set -- $(
+        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
+        xargs -n1 |
+        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
+        tr '\n' ' '
+    )" '"$@"'
+
+exec "$JAVACMD" "$@"
diff --git a/quickjs/native/cmake/zig-ar.sh b/quickjs/native/cmake/zig-ar.sh
old mode 100755
new mode 100644
diff --git a/quickjs/native/cmake/zig-ranlib.sh b/quickjs/native/cmake/zig-ranlib.sh
old mode 100755
new mode 100644