This sketch is intended to be hooked up to the RF receiver that was part of an old Zeus security system. The system had two wireless PIRs and two wireless door sensors.
I have not been able to find much online about the system. The most detail is this manual (in French) which is of limited use. My system is no longer operational and looking at the board a blown capacitor explains why...
TODO: add some photos of board
So, I've desoldered the RF receiver sub-board and now have it hooked up to:
- A Saleae logic analyser and
- (soon) an Arduino Pro Mini compatible
TODO: circuit diagram
This sketch uses the decoder in https://github.com/dmkent/zeus-rf-core to attempt to decode the signal from the reciever in real-time on the Arduino.