No output VIRTUAL1

[Magicrafter13]

Upon running vdl-monitor, I receive this:

Start configuration
xrandr: cannot find output "VIRTUAL1"
add resolution 3040x1440
warning: output VIRTUAL1 not found; ignoring
start display VIRTUAL1 to 3040x1440

Followed by the output of xrandr and then

Done, Check your VDL Monitor on System Setting > Display

The file /usr/share/X11/xorg.conf.d/20-intel.conf exists with these contents:

Section "Device"
    Identifier "intelgpu0"
    Driver "intel"
    Option "VirtualHeads" "2"
EndSection

Of possible note is that I am running on hybrid graphics (integrated only is not an option in my BIOS, only hybrid and dedicated/nvidia-only), and that I have optimus-manager installed.

[pandasoli]

run: sudo apt install xorg openbox,
reboot (make sure the file is at /usr/share/X11/xorg.conf.d/20-intel.conf),
and then run ./vdl-monitor again. ❤️

[MichaelHetrick3321]

I have the same issue. I tried the above but I still get "xrandr: cannot find output "VIRTUAL1"" pls help