Skip to content

dheshanm/Despeckler_FIS

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

15 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Despeckler_FIS

A Neuro-Fuzzy Inference System designed to despeckle SAR images

Requirements

Hardware Requirements

The following are the application specific Hardware requirements

  1. CPU
    1. Higher core count (6 recommended): The program has been written with CPU parallelization in mind, and a higher core or thread count would significantly reduce the runtime of the program.
    2. Higher Frequency: Helps with reducing execution times
  2. Memory/RAM
    1. Higher Capacity (16GB Recommended): Since source SAR images are large, owing to their huge resolutions, and the need to have the entire image loaded onto the system’s memory during runtime, a moderate amount of RAM is required to sustain the program

Software Requirements

  • MATLAB (Written in 2020a)
    • Fuzzy Logic Toolbox (Default Add-on)
    • MEX (setup and configured)
  • LibTiff Library (Installed)
  • C / C++ compiler (like MinGW) [optional]
    • To optimize for the memory and CPU usage, part of the MATLAB executable code have been converted to native C/C++ code using MATLAB’s MEX system, and therefore, to take advantage of the improved speed and optimizations, a compatible C/C++ compiler is necessary.
    • Results in much faster execution times

How to Use

  1. Ensure than MEX has been configured to use a compatible C / C++ compiler
  2. Run the 'run_driver.bat' or 'run_driver.sh' depending on your Operating System.
    1. Choose an Input SAR image (Preferred format: GeoTiff)
    2. Choose a FIS
      1. Those designed as part of this project can be found under 'build/FIS'
    3. Choose the Output Directory, where the output image is to be placed.
    4. Wait patiently for the process to complete.
      • A 1000x1000 image takes roughly 60 seconds on a 6-core machine
  3. The input image will be processed and be placed in the chosed Output Directory, with 'out_' prefix.
    • The output will be in GeoTiff format, and therefore uses LibTiff Library
    • A good tool to visualize the output will be QGIS