mpv.conf

#
# Example mpv configuration file
#
# Warning:
#
# The commented example options usually do _not_ set the default values. Call
# mpv with --list-options to see the default values for most options. There is
# no builtin or example mpv.conf with all the defaults.
#
#
# Configuration files are read system-wide from /usr/local/etc/mpv.conf
# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
# system-wide settings, all of which are overridden by the command line.
#
# Configuration file settings and the command line options use the same
# underlying mechanisms. Most options can be put into the configuration file
# by dropping the preceding '--'. See the man page for a complete list of
# options.
#
# Lines starting with '#' are comments and are ignored.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.
#
# Profiles should be placed at the bottom of the configuration file to ensure
# that settings wanted as defaults are not restricted to specific profiles.

##################
# video settings #
##################

# Start in fullscreen mode by default.
#fs=yes

# force starting with centered window
#geometry=50%:50%

# don't allow a new window to have a size larger than 90% of the screen size
#视频窗口最大化适应（当视频分辨率大于屏幕分辨率时，限制窗口大小为屏幕分辨率对应比例，避免完全占满屏幕）
autofit-larger = 60%x60%
autofit-smaller = 60%x60%

#截屏
#截屏文件格式（可选：png、ppm、pgm、pgmyuv、tga、jpg、jpeg）
screenshot-format = png

#截屏文件名模板
screenshot-template = '%F-%02n'

#截屏文件保存路径
screenshot-directory = '~~desktop/'

#截屏jpeg 质量（0-100），默认值为90。
#screenshot-jpeg-quality=100

# Do not close the window on exit.
# 播放结束后不退出
keep-open = yes

# Do not wait with showing the video window until it has loaded. (This will
# resize the window once video is loaded. Also always shows a window with
# audio.)
#force-window=immediate

# Disable the On Screen Controller (OSC).
osc=no

# Keep the player window on top of all other windows.
#窗口始终置顶
#ontop=yes

#关闭窗口装饰（无边框）
#no-border


cursor-autohide = 2000 # 1秒后自动隐藏鼠标

# Specify high quality video rendering preset (for --vo=gpu only)
# Can cause performance problems with some drivers and GPUs.
#profile=gpu-hq

# Force video to lock on the display's refresh rate, and change video and audio
# speed to some degree to ensure synchronous playback - can cause problems
# with some drivers and desktop environments.
#video-sync=display-resample

# Enable hardware decoding if available. Often, this does not work with all
# video outputs, but should work well with default settings on most systems.
# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
# may or may not help.
#视频硬件解码API选择（因系统环境、显卡、驱动等差异硬件解码API方式（阅读官方参考手册查询）各有不同，建议实际测试验证后再填入可用API），默认值为 no（使用软件解码），auto 为自动。
hwdec = auto

### gpu-api的选择
## macOS：  只有opengl可选
## Linux：  vulkan或者opengl，推荐vulkan
## Windows：vulkan、d3d11及opengl都可选。三者理论上vulkan性能最好，但依然推荐d3d11。
## 通过d3d11 api，目前mpv已支持windows的10 bit输出和HDR colorspace的设定。
## HDR metadata pass on正在跟进，独占全屏正在跟进。
### 使用d3d11 （mpv对于windows的默认。显卡注意开自适应电源模式）
#gpu-api=d3d11

#设定程序启动后的默认音量
volume = 30

##################
# audio settings #
##################

# Specify default audio device. You can list devices with: --audio-device=help
# The option takes the device string (the stuff between the '...').
#audio-device=alsa/default

# Do not filter audio to keep pitch when changing playback speed.
#audio-pitch-correction=no

# Output 5.1 audio natively, and upmix/downmix audio with a different format.
#audio-channels=5.1
# Disable any automatic remix, _if_ the audio output accepts the audio format.
# of the currently played file. See caveats mentioned in the manpage.
# (The default is "auto-safe", see manpage.)
#audio-channels=auto

##################
# other settings #
##################

# Pretend to be a web browser. Might fix playback with some streaming sites,
# but also will break with shoutcast streams.
#user-agent="Mozilla/5.0"

# cache settings
#
# Use a large seekable RAM cache even for local input.
#cache=yes
#
# Use extra large RAM cache (needs cache=yes to make it useful).
#demuxer-max-bytes=500M
#demuxer-max-back-bytes=100M
#
# Disable the behavior that the player will pause if the cache goes below a
# certain fill size.
#cache-pause=no
#
# Store cache payload on the hard disk instead of in RAM. (This may negatively
# impact performance unless used for slow input such as network.)
#cache-dir=~/.cache/
#cache-on-disk=yes

# Display English subtitles if available.
#指定优先使用字幕轨（DVD使用ISO 639-1两位语言代码，MKV、MPEG-TS使用ISO 639-2 三位语言代码）
slang = 'zh,chi'

# Play Finnish audio if available, fall back to English otherwise.
#指定优先使用音轨（DVD使用ISO 639-1两位语言代码，MKV、MPEG-TS使用ISO 639-2 三位语言代码）
alang = 'zh,chi'

#播放音频文件时显示含有的图像（如封面），默认值为 attachment，不显示值为 no
audio-display = attachment

#音量最大值设定（范围：100.0-1000.0），默认值为130
volume-max = 100

#加载视频文件的外部音频文件方式。（fuzzy 加载含有视频文件名的全部音频文件）
audio-file-auto = fuzzy

#加载视频文件的外部字幕文件方式。（fuzzy 加载含有视频文件名的全部字幕文件）
sub-auto = fuzzy
# Editor