The Automap
The automap is a top-down representation of the current map and your position within it. It may be opened at any time during a game by pressing the TAB key.
The thick red lines in the automap indicate solid walls, while brown lines indicate a change in the floor’s height and yellow lines a change in the ceiling’s height.
While the automap is open, there are a few additional controls:
 |
 |
|---|---|
| TAB | Closes the automap. |
| + / – | Zooms in/out. |
| F | Toggles follow mode. |
| R | Toggles rotate mode. |
| G | Toggles the grid. |
| M | Adds a mark. |
| C | Clears mark(s).1 |
| 0 | Toggles full zoom. |
| ↑ / ↓ / ← / → | Pans around the automap.2 |
The automap may be shown on an external display by enabling the am_external CVAR in the console.
The path you take and the distance you have traveled may be displayed in the automap by enabling the am_path CVAR in the console.
The amount of time you have been in the current map, the monsters you have killed, the items you have picked up and the secrets you have found, may all be displayed in the automap by enabling the am_playerstats CVAR in the console.
1Press the C key to clear the last mark added. Hold the key down to clear all of them.
2The player may only pan around the automap while follow mode is off.
