[Camera Support]: Dahua / Empire Tech Andy IPC-Color4K-T180 LED lights stop working #13513
Replies: 7 comments 25 replies
-
|
Can you provide the output of |
Beta Was this translation helpful? Give feedback.
-
|
{"consumers":[{"medias":["video, sendonly, H264, H265","audio, sendonly, MPEG4-GENERIC"],"remote_addr":"127.0.0.1:50720","sdp":"v=0\r\no=- 1 1 IN IP4 0.0.0.0\r\ns=go2rtc/1.9.2\r\nc=IN IP4 0.0.0.0\r\nt=0 0\r\nm=video 0 RTP/AVP 96\r\na=rtpmap:96 H265/90000\r\na=fmtp:96 profile-id=1;sprop-sps=QgEBAUAAAAMAgAAAAwAAAwC0oACACAHCWNrksrZrlxAIAAADAAgAAAMAofxYlA==;sprop-pps=RAHA4YPAwUUk;sprop-vps=QAEMAf//AUAAAAMAgAAAAwAAAwC0rAk=\r\na=control:trackID=0\r\n","send":2325110827,"senders":["96 H265, bytes=2298243803, receivers=1"],"type":"RTSP passive consumer","url":"rtsp://127.0.0.1:8554/cam03_terrace_main","user_agent":"FFmpeg Frigate/0.14.1-f4f3cfa"},{"medias":["video, sendonly, ALL","audio, sendonly, ALL","audio, recvonly, ANY"],"remote_addr":"127.0.0.1:38668","senders":["98 H265, bytes=0, receivers=1","8 PCMA/8000, bytes=0, receivers=1"],"type":"probe","user_agent":"python-requests/2.32.3"}],"producers":[{"medias":["video, recvonly, H265","audio, recvonly, PCMA/8000"],"receivers":["98 H265, bytes=2298243803, senders=2","8 PCMA/8000, bytes=0, senders=1"],"recv":2318433935,"remote_addr":"x.x.x.x:554","sdp":"v=0\r\no=- 2252283416 2252283416 IN IP4 0.0.0.0\r\ns=Media Server\r\nc=IN IP4 0.0.0.0\r\nt=0 0\r\na=control:*\r\na=packetization-supported:DH\r\na=rtppayload-supported:DH\r\na=range:npt=now-\r\na=x-packetization-supported:IV\r\na=x-rtppayload-supported:IV\r\na=x-summary:Oversea\r\nm=video 0 RTP/AVP 98\r\na=control:trackID=0\r\na=framerate:20.000000\r\na=rtpmap:98 H265/90000\r\na=fmtp:98 profile-id=1;sprop-sps=QgEBAUAAAAMAgAAAAwAAAwC0oACACAHCWNrksrZrlxAIAAADAAgAAAMAofxYlA==;sprop-pps=RAHA4YPAwUUk;sprop-vps=QAEMAf//AUAAAAMAgAAAAwAAAwC0rAk=\r\na=recvonly\r\nm=audio 0 RTP/AVP 8\r\na=control:trackID=1\r\na=rtpmap:8 PCMA/8000\r\na=recvonly\r\n","type":"RTSP active producer","url":"rtsp://x.x.x.x:554/cam/realmonitor?channel=1&subtype=0/","user_agent":"go2rtc/1.9.2"}]} |
Beta Was this translation helpful? Give feedback.
-
|
The output looks fine. This must be some limitation or bug with the camera firmware. I’m not aware of any way to work around it if you want to continue to use the main stream. |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for your quick support - hope Andy finds a solution with the firmware. |
Beta Was this translation helpful? Give feedback.
-
|
Happy to help. Andy has been super helpful to me in the past, hope he can be for you too! |
Beta Was this translation helpful? Give feedback.
-
|
Hey I have the same camera and run the same setup as you and have the same problem. You're not the only one :( |
Beta Was this translation helpful? Give feedback.
-
|
Andy asks for a test with this firmware: Maybe you can also test this one. |
Beta Was this translation helpful? Give feedback.
-
|
Still the same issue for me :/ |
Beta Was this translation helpful? Give feedback.
-
|
Same issue still for me too. Andy provided me the same one as well. I noticed if I switch resolution to a lower one other than the maximum, the scheduling works for a day and then same issue. Switching back to max resolution immediately causes the leds to turn off even if its scheduled to be on. |
Beta Was this translation helpful? Give feedback.
-
|
That's interesting - when the LEDs are turned on before I connect with RTSP they keep working the whole night. They are also automatically turned off (in auto mode) in the morning but turning them back on fails. |
Beta Was this translation helpful? Give feedback.
-
|
Good info thank you, eager to see what Dahua says |
Beta Was this translation helpful? Give feedback.
-
|
Same issue here. I have not found a workaround yet. I wonder if the hikvision version has the same problem. |
Beta Was this translation helpful? Give feedback.
-
|
As @fitzd suggested I reduced FPS and resolution - now it takes some days until the error occurs. Unfortunately still no update from Andy. |
Beta Was this translation helpful? Give feedback.
-
|
Also seeing this. Very weird, let me know if you find out anything. |
Beta Was this translation helpful? Give feedback.
-
|
I have the same problem and contacted Andy.
It has been several months since I set this up and the lighting control is still working fine. The following error is recorded when reading the IPC-Color4K-T180 stream directly in go2rtc.
|
Beta Was this translation helpful? Give feedback.
-
|
I installed Frigate using the Homeassistant add-on. |
Beta Was this translation helpful? Give feedback.
-
|
Via nabu casa, reverse proxy, DDNS, etc. |
Beta Was this translation helpful? Give feedback.
-
|
I tested with nabu casa and the microphone icon appears and the microphone works. Also, the AI object detection alerts no longer work, probably because I set The following error was recorded when switching Enable/Disable for the microphone. |
Beta Was this translation helpful? Give feedback.
-
|
Do you have opus audio transcoding configured? That is required for webrtc audio |
Beta Was this translation helpful? Give feedback.
-
|
Thanks for the quick response. I did not set up Opus transcoding. Am I missing something else? |
Beta Was this translation helpful? Give feedback.
-
|
I am curious, can you turn the lights on via api call, this is how I do it for a similar camera IPC-Color4k, but may be worth a try:
May need to adjust: day profile would be: |
Beta Was this translation helpful? Give feedback.
-
|
I tried it on my IPC-Color4K-T180 and everything worked fine with |
Beta Was this translation helpful? Give feedback.
-
Describe the problem you are having
Hello,
I have a weird issue with my IPC-Color4k-T180 from Empire Tech Andy (it's a labeled Dahua camera). The camera has LED lights for the night. These can either be turned on automatically or manually.
The strange thing is now if I connect with go2rtc using RTSP this function stops to work after some time. Thus the lights neither turn on automatically nor can be turned on manually. If I change it to the sub stream the issue occurs directly.
Andys current solution is unfortunately only to point to his software.
Anyone else had the same issue or has an idea what can cause this?
Version
0.14.1
What browser(s) are you using?
No response
Frigate config file
Relevant Frigate log output
No issues in log fileRelevant go2rtc log output
No issues in log fileFFprobe output from your camera
.Frigate stats
No response
Operating system
Proxmox
Install method
Docker CLI
Object Detector
Coral
Network connection
Wired
Camera make and model
Dahua IPC-Color4K-T180 LED
Screenshots of the Frigate UI's System metrics pages
.
Any other information that may be helpful
No response
Beta Was this translation helpful? Give feedback.
All reactions