dhcpcd.conf

# A sample configuration for dhcpcd.
# See dhcpcd.conf(5) for details.

# Allow users of this group to interact with dhcpcd via the control socket.
controlgroup wheel

# Inform the DHCP server of our hostname for DDNS.
hostname

# Use the hardware address of the interface for the Client ID.
#clientid
# or
# Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
# Some non-RFC compliant DHCP servers do not reply with this set.
# In this case, comment out duid and enable clientid above.
duid

# Disable ipv6
noipv6rs
noipv6

# Persist interface configuration when dhcpcd exits.
persistent

# vendorclassid is set to blank to avoid sending the default of
# dhcpcd-<version>:<os>:<machine>:<platform>
vendorclassid

# A list of options to request from the DHCP server.
option domain_name_servers, domain_name, domain_search
option classless_static_routes
# Respect the network MTU. This is applied to DHCP routes.
option interface_mtu

# Request a hostname from the network
option host_name

# Most distributions have NTP support.
option ntp_servers

# Rapid commit support.
# Safe to enable by default because it requires the equivalent option set
# on the server to actually work.
option rapid_commit

# A ServerID is required by RFC2131.
require dhcp_server_identifier

# Generate SLAAC address using the Hardware Address of the interface
#slaac hwaddr
# OR generate Stable Private IPv6 Addresses based from the DUID
slaac private
noipv4ll

# Disable WPA supplicant in favor of iwd
nohook wpa_supplicant

# Configure static ip for server ethernet port
#interface wifi-server
#static ip_address=192.168.1.117
#interface wifi-server
#arping 192.168.1.1
#arping 192.168.1.0

#interface ethernet-server
#arping 192.168.1.1
#arping 192.168.1.0

#profile 192.168.1.1
#profile static
#static ip_address=192.168.1.117

#profile 192.168.1.0
#static ip_address=192.168.1.113