Skip to content

Latest commit

 

History

History
124 lines (107 loc) · 3.84 KB

history.md

File metadata and controls

124 lines (107 loc) · 3.84 KB
Raw

1.3.3.0

Date 2019.07.02

  • Fix for Linux Low 5G RX performance (FIJI-310)

1.3.2.0

Date 2019.04.05

  • Fix: rx checksum offload was disabled by default (FIJI-292)

1.3.1.0

Date 2019.03.05

  • Add HWIDs for QNAP (FIJI-269)

1.3.0.0

Date 2019.01.11

  • Implement Thermal throttling configure via FW interface (FIJI-238)

1.2.4.0

Date 2018.12.17

  • Add configure Thermal Throttling feature via priv flags(FIJI-219)

1.2.3.0

Date 2018.12.11

  • Add HWID for TRENDnet

1.2.2.0

Date 2018.11.23

  • fix for setting MTU on CentOs 7.2 (FIJI-209).

1.2.1.0

Date 2018.11.22

  • Switch FW mode to LAN+CDC (FIJI-206).
  • sync changes after upstream review.
    • fix for MTU: use same value everywhere (was different).
    • match to ECM configuration.
    • use linkmode_copy instead of bitmap_copy.

1.2.0.0

Date 2018.10.31

  • add possibility to enable/disable XFI/2 (FIJI-146).
  • fix su in makefile (FIJI-148).
  • fix for setting MTU (FIJI-152).
  • fix build for all main kernels (same as for atlantic) (FIJI-153).
  • sync changes after upstream review.
    • rewrite read/write functions.
    • use driver_priv field to store context.
    • check duplex setting in set_link_ksettings(ethtool -s option)
    • remove CDC configuration blacklisting.
    • add compiance for BE (all bitfield are repleced with mask and shifts)

1.1.0.0

Date 2018.10.11

  • thermal throttling feature (FIJI-125).
  • add ASIX's HWIDs (FIJI-132).

1.0.0.0

Date 2018.10.03

  • fix for trying to set WOL type other than MAGIC_PACKET. It should return Invalid parameter.
  • fill vlan_features: it enables csum, SG, TSO offloads for virtual VLAN interfaces.
  • rename TX/RX descriptors structures.

0.9.0.0

Date 2018.09.25

  • support for new interface for PHY and WOL configuration(FIJI-102).
  • Most of HW initialization is moved to link up event.
  • support of enable\disable RX checksum offload via ethtool(FIJI-90).
  • read FW version on B0 chip (FIJI-59).
  • fix inability to disable WOL via ethtool (FIJI-103).

0.8.0.0

Date 2018.08.31

  • read FW version on bind(FIJI-59).
  • add support of new ethttool callbacks get/set_ksettings (FIJI-74).
  • process setting of autoneg and speed via ethtool correctly (FIJI-76).
  • fixed a lot of warnings of the latest checkpatch.
  • change all prefixes from aqc101 to aqc111. Also module name was changed.
  • unify values names.
  • using "Aquantia AQtion USB to 5GbE Controller" as a driver name and driver description.
  • update copyrights: return original strings.

0.7.0.0

Date 2018.08.03

  • cleanup value names.
  • show FW version as 3 numbers.
  • update copirights.
  • remove MII support.
  • remove unnecessary function for ethtool (get_len and read eeprom).
  • cleanup descriptor structures.
  • remove unnecessary msg_enable value(is not used).
  • fix: advertising via ethtool(100Mbit was advertised everytime).
  • cleanup rx_fixup(skb reasseble).

0.6.0.0:

Date 2018.07.27

  • move to versioning with four numbers.
  • remove 10G from ethtool interface method get_setting.
  • show correct driver version, driver name, FW version.
  • reduce speed to 1Gbit in case device is connected via USB2.0 interface.
  • switch to 100Mbit when go to sleep state.
  • change LED's scheme: LED is on when link up and blinks when data goes over.
  • remove WAKE_PHY as wake option.

0.5.0:

Date 2018.07.17

  • put PHY to low power mode on stop/suspend (if no need to keep link) instead of Power down.
  • remove 10G from ethtool settings and advertising since it is not supported.
  • advertise 100Mbit/s (was not advertised).
  • fix broken data path after suspend/resume.
  • fix set multicas list and other filters.
  • remove unnecessary exports.
  • optimize parts of code (made it smaller).
  • optimize processing link up/down.
  • control by LED's.

0.4.0:

Date 2018.07.03

  • fix build for CentOS7.
  • fixed build for kernels less than 4.12.x.
  • clean sources.

Help:

modprobe usbnet
insmod aqc111.ko